Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Protect personnel and equipment from debris with these portable panels.

Gates collapse for easy transport and storage.

These metal guards provide more impact protection than plastic guards. Commonly used in warehouse and manufacturing areas, they protect corners on walls and other surfaces from impact.

Fortify a door's base as well as its bottom edge to guard them against damage from foot traffic and equipment. These plates can also be used to salvage rusted, rotted, or otherwise damaged doors.

Also known as door plates, armor plates, and mop plates, kick plates protect the base of a door from damage caused by foot traffic and equipment.

Add panels to T-slotted framing to create machine guards, strip doors, and welding curtains.

Connect T‐slotted rails and reinforce joints for structural stability.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Seal T-slots, rail ends, and gaps between rails to keep out dust, debris, and other contaminants.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Mount these bull's eye levels to workstation and table frames made of T-slotted framing for easy leveling in all directions on the horizontal plane.

Pivots provide smooth motion at the junction between two T-slotted rails.

Attach and position phones, tablets, monitors, and other displays on T-slotted rails.

Align and drill accurate holes in T-slotted rails with these reusable templates.

Distribute compressed air, hydraulic fluid, or water from a single supply to multiple locations.

Stay organized with hooks, bin boxes, shelves, and tool holders that work with T-slotted framing.

Half the weight of steel, this aluminum framing resists corrosion in wet environments.

Serrated grooves grip the lip of the channel.

Up to two times the height of regular strut channel, this high-profile channel is stronger than regular strut channel.

Build test fixtures, prototypes, and other small structures with this miniature version of T-slotted framing and fittings.

Fittings come in two pieces to wrap around rails, so you can quickly modify existing structures without disassembling. Use clamp-on framing and fittings to form temporary partitions, modular conveyors, and workstations.

Create posts of varying lengths.

Mount brushes by sliding them into a holder. Holders can be cut to size with a hacksaw.

Create catwalks, bridges, gangways, and mezzanines by combining these planks, guardrails, and toeboards.

The threshold height can be adjusted to ensure a tight fit under a door.

With a ribbed top, these thresholds offer more slip resistance than smooth-top thresholds.

The middle of these three-piece thresholds can be installed smooth or ribbed side up for more slip resistance.

Create a gradual incline between uneven floor surfaces. These ramps are good for allowing wheelchair access.

More durable than plastic caps, these provide the most protection from abrasion and impact.

Give open-ended standoffs a finished look and protect them from dirt and debris.

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

A rubber seal protects against moisture around the installation hole.

Machine holes and slots or weld in place.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

For use in hazardous locations, these enclosures are rated NEMA 7 and 9 and meet UL Class I, Divisions 1 and 2, Groups B, C, and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2.

Lighter than stainless steel yet durable, these aluminum enclosures protect electronics from frequent washdowns and withstand periodic submersion in water.

These enclosures reduce electromagnetic interference (EMI) and radio frequency interference (RFI), which can cause electrical problems like flickering monitors, interrupted data signals, and unwanted radio noise.

Fans built in to these enclosures keep electronics at the temperature you set, and the filtered intake and exhaust let cool air flow through the enclosure without letting water and contaminants in.

Attach these enclosures to machine panels and walls by their mounting feet—no need to open the cover and expose sensors, switches, and other electronics in wet locations. Made of aluminum, they’re lighter in weight than stainless steel yet resist rusting from water.

These enclosures have thicker walls than standard aluminum enclosures, but are still a lightweight yet durable alternative to stainless steel.

Snap these enclosures onto 35 mm DIN rail and lock them in place.

Keep the cover closed during operation to completely shield the outlet and plug from rain, snow, and wet conditions.

Exposure to rain, snow, and wet conditions won't damage these corrosion-resistant boxes.

Rain, snow, and wet conditions won't damage these corrosion-resistant covers.

Add depth to your weatherproof outlet box.

Close off unused outlets.

Give switches and outlets a finished look.

With the widest channels of any of our cable ramps, these ramps can span large cable, hose, and pipe.

With an oval bushing hole, these lightweight grips secure flat building cable, such as Romex and Festoon cable, in wet areas. All offer strain relief to extend cable life.

Keep your cord at a gentle angle without sacrificing a tight hold, even in tough, wet environments.

These cord grips are lightweight yet durable.

Stop cords from coming loose in wet environments while keeping them along the side of your enclosure in tight spaces.

Use these lightweight grips to secure cords entering knockouts at a 45° angle in wet, tight spaces while easing the stress from bending. Made of aluminum, they’re lighter in weight than steel and brass grips yet durable.

Connect a single flat cable to a junction box.

These cord grips are lightweight yet durable. They have a zinc-plated steel locknut and metal-reinforced rubber O-ring that prevents liquid from entering the connection.

Secure cords in wet and industrial environments with little room—these grips curve 45° to relieve bending stress.

Choose these guards if you need several door knob guards that open with the same key.

Choose these guards if you need door handle guards that each open with a different key.

Stick this flexible tape to the back of welding seams to contain spatter and prevent oxygen, water vapor, and other gases from weakening the weld.

This tape reflects intense heat to protect sensitive components.

Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.

Step on the spring-operated plunger to hold your door in place; tap on the release lever to free it.

For use with doors that already have a closer, these holders keep doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door.