System of Measurement System of Measurement |
|---|
|
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
Color Color |
|---|
 | Black |
Performance Properties Performance Properties |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Clarity Clarity |
|---|
|
Inside Height Inside Height |
|---|
|
|
|
Flexibility Flexibility |
|---|
 | Rigid |
Minimum Temperature Minimum Temperature |
|---|
|
Outside Corner Shape Outside Corner Shape |
|---|
|
About Sleeving
More
About Composites
More
Flame- and Heat-Resistant Blanket Rolls
Cut these blankets to size with a utility knife. They are for intermittent contact with flames and hot surfaces.
| Wd. | Lg., ft. | Thick., mil | Max. Temp., °F | Clarity | Color | Each | |
Carbon Fiber—16 oz./sq. yd. | |||||||
|---|---|---|---|---|---|---|---|
| 48" | 50 | 180 | 1800° | Opaque | Black | 0000000 | 0000000 |
Flame- and Heat-Resistant Blankets
Blankets are for intermittent contact with flames and hot surfaces.
Soft and tough, carbon fiber blankets withstand temperatures up to 1800°F. Use them to protect from heavy sparks, spatter, and slag in your heavy duty welding applications.
| Wd., ft. | Lg., ft. | Thick., mil | Max. Temp., ° F | Clarity | Color | Each | |
Carbon Fiber—16 oz./sq. yd. | |||||||
|---|---|---|---|---|---|---|---|
| 4 | 3 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
| 4 | 6 | 175 | 1800° | Opaque | Black | 0000000 | 00000 |
| 6 | 5 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
| 6 | 6 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
| 8 | 6 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
| 8 | 8 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
| 8 | 10 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
| 10 | 10 | 175 | 1800° | Opaque | Black | 0000000 | 000000 |
Carbon Fiber—24 oz./sq. yd. | |||||||
| 6 | 4 | 275 | 1800° | Opaque | Black | 0000000 | 000000 |
| 6 | 6 | 275 | 1800° | Opaque | Black | 0000000 | 000000 |
| 8 | 6 | 275 | 1800° | Opaque | Black | 0000000 | 000000 |
Carbon Fiber Slip-On Framing and Fittings
Stronger than plastic and aluminum, this is the lightest weight framing we offer. It has good resistance to chemicals and salt water. Slip the fittings over rails to construct custom railings, guard rails, storage racks, and shelving. Drill rails and connect fittings with the included hardware.
For technical drawings and 3-D models, click on a part number.
High-Strength Expandable Sleeving
With excellent torsional strength, this sleeving withstands the extreme twisting found in robotics. Made of carbon fiber, it has impact strength similar to steel yet is lighter than plastic and rubber. Resistant to corrosion and chemicals, it’s often used to protect brake lines and hydraulic lines. It’s expandable, so it stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. Cut with scissors or a hot-blade knife.
Ultra-High-Temperature Carbon Fiber 90° Angles
- Color: Black
- Tensile Strength: 11,000 psi (Good)
- Maximum Temperature: 5,000° F
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Unlike metal angles, these carbon fiber 90° angles won’t warp at extreme temperatures, so they’re ideal for heat treating and furnace fixtures. They are lightweight with an excellent strength-to-weight ratio and the material heats up quickly to reduce cycle times.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 39" Lg. | |||||
|---|---|---|---|---|---|---|---|
| Width | Width Tolerance | Height | Height Tolerance | Height | Width | Each | |
0.1" Wall Thickness (-0.04" to 0.04") | |||||||
| 2 1/2" | -0.08" to 0.08" | 2 1/2" | -0.08" to 0.08" | 2.4" | 2.4" | 00000000 | 0000000 |
Ultra-High-Temperature Carbon Fiber U-Channels
- Color: Black
- Tensile Strength: 11,000 psi (Good)
- Maximum Temperature: 5,000° F
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Unlike metal channels, these carbon fiber U-channels won’t warp at extreme temperatures, so they’re ideal for heat treating and furnace fixtures. They are lightweight with an excellent strength-to-weight ratio and the material heats up quickly to reduce cycle times.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 39" Lg. | |||||
|---|---|---|---|---|---|---|---|
| Width | Width Tolerance | Height | Height Tolerance | Height | Width | Each | |
0.05" Wall Thickness (-0.04" to 0.04") | |||||||
| 1 1/2" | -0.08" to 0.08" | 1 1/2" | -0.08" to 0.08" | 1.45" | 1.4" | 00000000 | 0000000 |
| 1 1/2" | -0.08" to 0.08" | 2" | -0.08" to 0.08" | 1.95" | 1.4" | 00000000 | 000000 |
| 2" | -0.08" to 0.08" | 2" | -0.08" to 0.08" | 1.95" | 1.9" | 00000000 | 000000 |
0.1" Wall Thickness (-0.04" to 0.04") | |||||||
| 1 1/2" | -0.08" to 0.08" | 3" | -0.08" to 0.08" | 2.99" | 1.48" | 00000000 | 000000 |
Ultra-Strength Lightweight Carbon Fiber 90° Angles
- Color: Black
- Tensile Strength: See table
- Tensile Strength Rating: Excellent
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Maximum Temperature:
Round Inside Corner: 185° F
Square Inside Corner: 250° F - Impact Strength: Not Rated
- Hardness: Not Rated
Often used as brackets to build frames and structures, these composite angles are the strongest we offer. An alternative to 6061 aluminum, they have an excellent strength-to-weight ratio and are lighter in weight.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | |||||||
|---|---|---|---|---|---|---|---|---|
| Width | Width Tolerance | Height | Height Tolerance | Height | Width | Tensile Strength | Each | |
12" Lg. | ||||||||
Round Inside Corner | ||||||||
0.065" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 0.935" | 0.935" | 87,000 psi | 00000000 | 000000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.935" | 1.935" | 87,000 psi | 00000000 | 00000 |
| 3" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 2.935" | 2.935" | 170,000 psi | 00000000 | 000000 |
0.13" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 0.87" | 0.87" | 87,000 psi | 00000000 | 00000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.87" | 1.87" | 87,000 psi | 00000000 | 00000 |
| 3" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 2.87" | 2.87" | 170,000 psi | 00000000 | 000000 |
Square Inside Corner | ||||||||
0.08" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1.42" | 1.42" | 135,000 psi | 00000000 | 00000 |
36" Lg. | ||||||||
Round Inside Corner | ||||||||
0.065" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 0.935" | 0.935" | 87,000 psi | 00000000 | 00000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.935" | 1.935" | 87,000 psi | 00000000 | 000000 |
| 3" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 2.935" | 2.935" | 170,000 psi | 00000000 | 000000 |
0.13" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 0.87" | 0.87" | 87,000 psi | 00000000 | 000000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.87" | 1.87" | 87,000 psi | 00000000 | 000000 |
| 3" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 2.87" | 2.87" | 170,000 psi | 00000000 | 000000 |
Square Inside Corner | ||||||||
0.08" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1.42" | 1.42" | 135,000 psi | 00000000 | 000000 |
6 ft. Lg. | ||||||||
Round Inside Corner | ||||||||
0.065" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 0.935" | 0.935" | 87,000 psi | 00000000 | 000000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.935" | 1.935" | 87,000 psi | 00000000 | 000000 |
| 3" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 2.935" | 2.935" | 170,000 psi | 00000000 | 000000 |
0.13" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1" | -0.125" to 0.125" | 1" | -0.125" to 0.125" | 0.87" | 0.87" | 87,000 psi | 00000000 | 000000 |
| 2" | -0.125" to 0.125" | 2" | -0.125" to 0.125" | 1.87" | 1.87" | 87,000 psi | 00000000 | 000000 |
| 3" | -0.125" to 0.125" | 3" | -0.125" to 0.125" | 2.87" | 2.87" | 170,000 psi | 00000000 | 000000 |
Square Inside Corner | ||||||||
0.08" Wall Thickness (-0.06" to 0.06") | ||||||||
| 1 1/2" | -0.125" to 0.125" | 1 1/2" | -0.125" to 0.125" | 1.42" | 1.42" | 135,000 psi | 00000000 | 000000 |
Ultra-Strength Lightweight Carbon Fiber U-Channels
- Color: Black
- Tensile Strength: 103,000 psi (Excellent)
- Fiber Tensile Stiffness: Standard (33-36 msi)
- Maximum Temperature: 275° F
- Impact Strength: Not Rated
- Hardness: Not Rated
- For Use Outdoors: No
Often used to make railings, edge covers, and other structural framing parts, these carbon fiber U-channels add stiffness and strength to applications without adding a lot of weight. They’re similar in strength to 6061 aluminum yet lighter in weight. With a plain weave and 0°/90° construction layup, all are easy to machine. They won’t splinter when cut.
For technical drawings and 3-D models, click on a part number.
Outside | Inside | 36" Lg. | 74" Lg. | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Width | Width Tolerance | Height | Height Tolerance | Width | Height | Each | Each | ||
Checked Glossy U-Channels | |||||||||
0.05" Wall Thickness (-0.06" to 0.06") | |||||||||
| 2 1/8" | -0.125" to 0.125" | 1" | -0.126" to 0.126" | 2" | 0.945" | 00000000 | 0000000 | 00000000 | 0000000 |
| 2 1/8" | -0.125" to 0.125" | 1 1/4" | -0.128" to 0.128" | 2" | 1.195" | 00000000 | 000000 | 00000000 | 000000 |
| 2 1/8" | -0.125" to 0.125" | 1 1/2" | -0.132" to 0.132" | 2" | 1.445" | 00000000 | 000000 | 00000000 | 000000 |
| 3 1/8" | -0.125" to 0.125" | 1 1/2" | -0.132" to 0.132" | 3" | 1.445" | 00000000 | 000000 | 00000000 | 000000 |
| 3 1/8" | -0.125" to 0.125" | 1 3/4" | -0.134" to 0.134" | 3" | 1.695" | 00000000 | 000000 | 00000000 | 000000 |
0.06" Wall Thickness (-0.06" to 0.06") | |||||||||
| 4 1/8" | -0.125" to 0.125" | 2" | -0.136" to 0.136" | 4" | 1.935" | 00000000 | 000000 | 00000000 | 000000 |
| 4 1/8" | -0.125" to 0.125" | 2 1/4" | -0.138" to 0.138" | 4" | 2.185" | 00000000 | 000000 | 00000000 | 000000 |