Filter by
Material
Mesh Size
System of Measurement
Wire Diameter
Shape
Performance
Construction
Export Control Classification Number (ECCN)
DFARS Specialty Metals
Magnetic Properties
Sleeving Type
Finish
Base Mount Type
Color
Sleeving Construction
Component
About Sleeving
More
Interference-Shielding Expandable Sleeving
Protect wire and cable from signal distortion caused by nearby equipment and devices. Expandable, this sleeving stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. This sleeving is also used to insulate and organize wire and cable. Cut to size with sheet metal snips.
Copper sleeving is more conductive than aluminum sleeving, so it resists more signal interference.
Tin-Plated Copper Sleeving
Per Ft. | |||||||
|---|---|---|---|---|---|---|---|
| ID | Expanded ID | Wall Thick. | Temperature Range, °F | Lengths, ft. | 1-99 | 100-Up | |
| 1/8" | 5/32" | 1/32" | Not Rated | 00000000 | 00000 | 00000 | |
| 1/4" | 5/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 3/8" | 7/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 1/2" | 9/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 9/16" | 23/32" | 1/32" | Not Rated | 00000000 | 0000 | 0000 | |
| 25/32" | 7/8" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
| 7/8" | 1 1/8" | 1/32" | Not Rated | 00000000 | 00000 | 0000 | |
| 1" | 1 1/8" | 1/16" | Not Rated | 0000000 | 00000 | 0000 | |
| 1 1/8" | 1 1/4" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
| 1 1/4" | 1 3/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
| 1 1/2" | 1 5/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
| 2" | 2 19/32" | 1/16" | Not Rated | 00000000 | 00000 | 00000 | |
Copper Wire Cloth
Copper is nonsparking and nonmagnetic. It is often used in marine environments because it is more resistant to corrosion from salt water than stainless steel.
For technical drawings and 3-D models, click on a part number.
Sheets
Mesh Size | Opening Size | Open Area | Wire Dia. | 1 ft. × 1 ft. | 1 ft. × 2 ft. | 2 ft. × 2 ft. | 2 ft. × 3 ft. | 3 ft. × 3 ft. | |
| 2 × 2 | 0.437" | 76% | 0.063" | 0000000 | |||||
| 4 × 4 | 0.203" | 65% | 0.047" | 0000000 | |||||
| 4 × 4 | 0.187" | 56% | 0.063" | 0000000 | |||||
| 6 × 6 | 0.132" | 62% | 0.035" | 0000000 | |||||
| 8 × 8 | 0.097" | 60% | 0.028" | 0000000 | |||||
| 10 × 10 | 0.075" | 56% | 0.025" | 0000000 | |||||
| 12 × 12 | 0.06" | 51% | 0.023" | 0000000 | |||||
| 14 × 14 | 0.051" | 51% | 0.02" | 0000000 | |||||
| 16 × 16 | 0.052" | 67% | 0.011" | 0000000 | |||||
| 16 × 16 | 0.045" | 50% | 0.018" | 0000000 | |||||
| 18 × 18 | 0.039" | 48% | 0.017" | 0000000 | |||||
| 20 × 20 | 0.034" | 46% | 0.016" | 0000000 | |||||
| 22 × 22 | 0.034" | 54% | 0.012" | 0000000 | |||||
| 24 × 24 | 0.028" | 44% | 0.014" | 0000000 | |||||
| 30 × 30 | 0.021" | 40% | 0.012" | 0000000 | |||||
| 40 × 40 | 0.015" | 36% | 0.01" | 0000000 | |||||
| 50 × 50 | 0.011" | 30% | 0.009" | 0000000 | |||||
| 60 × 60 | 0.009" | 30% | 0.0075" | 0000000 | |||||
| 80 × 80 | 0.007" | 31% | 0.0055" | 0000000 | |||||
| 100 × 100 | 0.006" | 30% | 0.0045" | 0000000 |
Other Sizes
3 ft. Wd. | ||||||
|---|---|---|---|---|---|---|
| Mesh Size | Opening Size | Open Area | Wire Dia. | Lg., ft. | Each | |
| 2 × 2 | 0.437" | 76% | 0.063" | 1 | 00000000 | 000000 |
| 2 × 2 | 0.437" | 76% | 0.063" | 10 | 00000000 | 000000 |
| 2 × 2 | 0.437" | 76% | 0.063" | 20 | 00000000 | 000000 |
| 2 × 2 | 0.437" | 76% | 0.063" | 50 | 00000000 | 00000000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 1 | 00000000 | 00000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 10 | 00000000 | 000000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 20 | 00000000 | 000000 |
| 4 × 4 | 0.203" | 65% | 0.047" | 50 | 00000000 | 00000000 |
| 4 × 4 | 0.187" | 56% | 0.063" | 1 | 00000000 | 000000 |
| 4 × 4 | 0.187" | 56% | 0.063" | 10 | 00000000 | 00000000 |
| 4 × 4 | 0.187" | 56% | 0.063" | 20 | 00000000 | 00000000 |
| 4 × 4 | 0.187" | 56% | 0.063" | 50 | 00000000 | 00000000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 1 | 00000000 | 00000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 10 | 00000000 | 000000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 20 | 00000000 | 000000 |
| 6 × 6 | 0.132" | 62% | 0.035" | 50 | 00000000 | 00000000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 1 | 00000000 | 00000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 10 | 00000000 | 000000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 20 | 00000000 | 000000 |
| 8 × 8 | 0.097" | 60% | 0.028" | 50 | 00000000 | 00000000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 1 | 00000000 | 00000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 10 | 00000000 | 000000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 20 | 00000000 | 000000 |
| 10 × 10 | 0.075" | 56% | 0.025" | 50 | 00000000 | 00000000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 1 | 00000000 | 00000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 10 | 00000000 | 000000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 20 | 00000000 | 000000 |
| 12 × 12 | 0.06" | 51% | 0.023" | 50 | 00000000 | 00000000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 1 | 00000000 | 00000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 10 | 00000000 | 000000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 20 | 00000000 | 000000 |
| 14 × 14 | 0.051" | 51% | 0.02" | 50 | 00000000 | 00000000 |
| 16 × 16 | 0.052" | 67% | 0.011" | 1 | 00000000 | 00000 |
| 16 × 16 | 0.052" | 67% | 0.011" | 10 | 00000000 | 000000 |
| 16 × 16 | 0.052" | 67% | 0.011" | 20 | 00000000 | 000000 |
| 16 × 16 | 0.052" | 67% | 0.011" | 50 | 00000000 | 000000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 1 | 00000000 | 00000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 10 | 00000000 | 000000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 20 | 00000000 | 000000 |
| 16 × 16 | 0.045" | 50% | 0.018" | 50 | 00000000 | 00000000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 1 | 00000000 | 00000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 10 | 00000000 | 000000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 20 | 00000000 | 00000000 |
| 18 × 18 | 0.039" | 48% | 0.017" | 50 | 00000000 | 00000000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 1 | 00000000 | 00000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 10 | 00000000 | 000000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 20 | 00000000 | 000000 |
| 20 × 20 | 0.034" | 46% | 0.016" | 50 | 00000000 | 00000000 |
| 22 × 22 | 0.034" | 54% | 0.012" | 1 | 00000000 | 00000 |
| 22 × 22 | 0.034" | 54% | 0.012" | 10 | 00000000 | 000000 |
| 22 × 22 | 0.034" | 54% | 0.012" | 20 | 00000000 | 000000 |
| 22 × 22 | 0.034" | 54% | 0.012" | 50 | 00000000 | 000000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 1 | 00000000 | 00000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 10 | 00000000 | 000000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 20 | 00000000 | 000000 |
| 24 × 24 | 0.028" | 44% | 0.014" | 50 | 00000000 | 00000000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 1 | 00000000 | 00000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 10 | 00000000 | 000000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 20 | 00000000 | 000000 |
| 30 × 30 | 0.021" | 40% | 0.012" | 50 | 00000000 | 00000000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 1 | 00000000 | 00000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 10 | 00000000 | 000000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 20 | 00000000 | 000000 |
| 40 × 40 | 0.015" | 36% | 0.01" | 50 | 00000000 | 00000000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 1 | 00000000 | 00000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 10 | 00000000 | 000000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 20 | 00000000 | 00000000 |
| 50 × 50 | 0.011" | 30% | 0.009" | 50 | 00000000 | 00000000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 1 | 00000000 | 00000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 10 | 00000000 | 000000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 20 | 00000000 | 000000 |
| 60 × 60 | 0.009" | 30% | 0.0075" | 50 | 00000000 | 00000000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 1 | 00000000 | 00000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 10 | 00000000 | 000000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 20 | 00000000 | 000000 |
| 80 × 80 | 0.007" | 31% | 0.0055" | 50 | 00000000 | 00000000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 1 | 00000000 | 00000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 10 | 00000000 | 000000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 20 | 00000000 | 000000 |
| 100 × 100 | 0.006" | 30% | 0.0045" | 50 | 00000000 | 000000 |
Bend-and-Stay Positioning Arms
Stronger and with greater load capacities than gooseneck-style positioning arms, these arms keep their shape even when moving or when exposed to vibration. They’re often used in robotics and conveyor applications when frequent repositioning isn’t required.
Arms
Positioning Arm
Base | Attaching End | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. Projection | Dia. | Max. Load Cap., lbs. | Material | Color | Mount Type | Mounting Thread Size | Mounting Hole Thread Type | Mounting Fasteners Included | Mount Type | Mounting Thread Size | Mounting Thread Type | Mounting Fasteners Included | Each | |
| 6" | 5/8" | 20 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 000000 |
| 9" | 5/8" | 7 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 00000 |
| 12" | 5/8" | 5 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 00000 |
| 18" | 5/8" | 3 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 00000 |
| 24" | 5/8" | 2.5 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 00000 |
| 30" | 5/8" | 2 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 00000 |
| 36" | 5/8" | 0.5 | Vinyl-Coated Copper | Black | Threaded Hole | 3/8"-24 | UNF | No | Threaded Hole | 3/8"-24 | UNF | No | 00000000 | 00000 |