Lightweight and flexible enough to roll up and carry, these panels are wire reinforced so they stand on their own.

Provide excellent chemical resistance with these silica cloth curtains.

Keep covered items dry with these UV-resistant tarps.

Allow air to circulate to prevent condensation buildup with these tarps. They're double-stitched and have reinforced corners for durability.

Protect against hot and cold temperature changes. These tarps have an insulating foam core covered by a reinforced outer cover. They are silver on one side to reflect sunlight and black on the other for UV resistance.

These tarps resist flames, tears, and water.

These tarps withstand gasoline, methanol, sodium chloride, ammonium sulfate, petroleum, and lubricating oils.

Equally spaced D-rings along two center seams allow a tight hold.

A magnet sewn into each corner keeps these tarps in place on equipment.

The most puncture-, abrasion-, and tear-resistant box-shaped tarps we offer.

Capture leaks to protect work areas and equipment by hanging this tarp beneath a problem pipe.

Made of woven polyethylene fabric, this is the most puncture-, abrasion-, and tear-resistant surface protection we offer. Commonly used on heavy equipment, it guards metal, plastic, composite, and painted surfaces from damage. It can also be used as a protective layer beneath other materials.

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Protect your floors from grime and scuffs, plus reduce noise.

Increase the life of rope slings by positioning these protectors over areas prone to wear.

Protect shelved items on all sides—these covers rest over heavy duty wire shelving units to keep out dust.

Designed for intermittent handling of hot pipes, engine parts, and castings, these gloves protect your hands from moderate heat and some abrasion.

Protect your hands from intermittent exposure to extreme heat during jobs that don't require high dexterity. Mitts are more convenient to put on and take off than gloves.

Also known as wave solder gloves, wear these to avoid damaging static-sensitive electronic parts. They have a nitrile coating that protects hands while soldering.

Often used for casting and ceramics production, these cotton gloves are the traditional choice for jobs involving intermittent moderate heat.

Use these sleeves alone or with gloves to protect your arms from heat.

Use these sleeves alone or with gloves to protect your arms from welding sparks and spatter.

Minimize hand fatigue while operating rivet guns, jackhammers, and other power tools that produce high levels of vibration.

Wrap fingers to protect against cuts and abrasions without limiting dexterity.

Protect your arm from stains, sparks, and abrasions. Use these sleeves alone or with gloves.

Use these sleeves alone or with gloves to protect your arm from oils and most acids.

Thick aramid fabric protects hands when handling hot, dry objects such as heated ceramics and glass flasks. Gloves are cleaned and bagged in environments with low levels of particulates to avoid work area contamination.

Prevent damage to gloves in storage.

Protect your hands from intermittent handling of hot objects. These gloves are rated for cut resistance to guard hands from sharp objects.

These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4.

Limit wrist movement and maintain a safe, neutral position.

Lightweight and breathable, these shoes provide the protection of a safety shoe with an athletic feel.

Keep dust and other particles on your shoes from contaminating clean rooms.

Taller than shoe covers, boot covers protect mid-calf and knee-high boots. They are lightweight and protect boots from dirt, grime, and liquid splashes.

These abrasion-, tear-, and cut-resistant leggings protect your lower legs and feet against radiant heat, flames, and welding sparks.

Protect your arms and chest from heat and sparks when welding.

Made of cotton, these coveralls are treated to protect against low radiant heat and minor sparks when welding.

These aprons extend past the knees and wrap around each leg, providing better coverage and allowing for better mobility than other aprons.

Protect your torso and thighs from heat and sparks when welding.

Stretch these form-fitting guards over hard hats to provide warmth and protection from the wind.

Keep sun and sweat out of your eyes with these breathable, washable caps.

Protect your neck from heat, sparks, and molten metal splashes. Use the hook and loop tabs to fasten them to a hard hat.

These knee-length coats offer more coverage than jackets to protect against heat and sparks. Hot particles won't get trapped because there are no pockets. Pull tabs allow for quick removal.

Add a layer of warmth to your hard hat.

Rubber and plastic coatings prevent oil and other liquids from penetrating these aprons.

Rated ANSI level A9, these aprons meet the highest standards for cut resistant clothing. They provide cut and puncture protection against sharp, heavy materials such as metal, glass, wood, and wire.

Choose these jackets for protection from heat and sparks. They have no pockets, so hot particles won't get trapped, and pull tabs to allow for quick removal.

Also known as cryogenic aprons, these protect against extremely cold materials, such as liquid nitrogen and dry ice.

Prevent sediment and top soil from washing away while water flows through.

No more filling and carrying heavy sandbags—just add water to these flat, lightweight barriers, and they expand to block flooding.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Reduce the likelihood of slipping in high-traffic areas. This sleeving has thick, nonslip fibers that create friction so it doesn’t slide when you step on it. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

This sleeving withstands temperatures over 1000°F, such as in refineries.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

A specially formulated silicone rubber coating allows this sleeving to stretch over items during installation; it then tightens around its contents for a secure fit.

Protect the cables on your TIG guns from weld spatter.