These panels lift on and off their posts in seconds, so you can protect machinery while providing access for maintenance.

Compact in size, these guards can be mounted directly to a machine or workbench. Panels are framed in aluminum T-slotted extrusions to provide multiple points of attachment for other components.

These guardrails sit low to the ground to protect racks and equipment without restricting access.

Start with two bases and then stack rails to the desired height.

These bollards flex slightly when bumped by a vehicle to prevent dents and dings.

Prevent damage to dock doors using these bright yellow guards, which act as a barrier and catch the eye of vehicle operators.

Place these guards over a skylight to protect against falls.

Connect rails and posts with included slip-on fittings to quickly assemble a railing.

Combine bases, rails, gates, and toeboards to create a barrier customized to your needs. Base is weighted to allow installation without drilling holes.

Create a temporary barrier around hazards such as open manholes.

Make stairs and ramps safe and accessible for all with these ADA-compliant railings.

A hydraulic arm allows these gates to close smoothly.

Gates collapse for easy transport and storage.

Connect T‐slotted rails and reinforce joints for structural stability.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Connect two channels to create a stacked channel.

Also known as insert nuts, these convert slotted holes to threaded round holes and keep them centered in the channel.

A tab fits tightly against the lip of the channel to keep these nuts from slipping.

Use with hex nuts to connect threaded rod.

Notches on these washers grip the channel to keep them in place.

There's no need for additional fasteners with these nuts—they combine a strut channel nut with a spring and a threaded stud.

Quickly attach these nuts by twisting them closed at any point along a threaded rod.

Create a four-sided raceway for cable, or give a more finished look to strut channel structures.

Slide the strut channel into the tube for telescoping length adjustments.

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Half the height and the same width as regular strut channel, this low-profile strut channel fits into tight spots and is compatible with many of the same brackets.

Create continuous runs of channel without corners.

Run cable and tubing in the tightest spaces with channel that is one-quarter the height and one-half the width of regular strut channel.

This welded, one-piece strut channel combines two strut channels side-to-side.

Provide smooth motion between two pieces of strut channel.

Create strong structures by welding this framing together. Add metal panels to close off openings.

If none of our standard guards fit your chain or belt system, we'll create one to suit your needs. Guards are steel and fit sprockets up to 48" apart.

Due to the welded-wire construction these panels require fewer nuts and bolts, and won’t unravel if you need to cut around a pipe or other obstruction.

Protect rack posts from damage caused by vehicles.

Roll these portable, wall-mounted gates wherever you need temporary access control.

Mount gates on each side of a doorway and lock them together in the center for security without sacrificing visibility and air circulation.

Give open-ended standoffs a finished look and protect them from dirt and debris.

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

Protect your detectors from damage and tampering.

Store your robot teach pendant conveniently near your robot but out of harm’s way.

With wire strands welded at each intersection, this fencing has a strong, rigid construction.

Add permanent slip resistance to floors, ramps, stairs, and docks with these solid plates.

Secure circuit breaker switches that don’t have a hole for a padlock.

Lock out the on/off or emergency-stop buttons on machinery to prevent accidental or unauthorized startups, such as during maintenance.

Cover the gap between your door and frame to protect the latch bolt from being pried open.