These rails have continuous T-slots for attaching fittings. Use this versatile framing to configure machine guards, enclosures, carts, and workstations.

Screw and nut sets or nuts secure brackets and other accessories to rails.

Add mounting feet and casters to T-slotted framing structures to level equipment, anchor legs to the floor, or add mobility.

Attach sensors, tubes, and other components to T-slotted framing rails and structures.

Secure doors and windows made of T-slotted framing to protect valuables or restrict access for safety.

Mount components to these load-rated bearings and track rollers to add linear motion along T-slotted rails.

Pivots provide smooth motion at the junction between two T-slotted rails.

Route wires, cables, and tubing along T-slotted rails.

Control static and ground T-slotted framing structures with these bonding and grounding components.

Add electrical outlets to workstations with these outlet strips that mount on T-slotted rails.

For repetitive workholding, mount these clamps to T-slotted framing to hold and release parts.

A spring plus serrated grooves that grip the lip of the channel provide a more secure hold than standard strut channel nuts.

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Designed to withstand repeated heavy hits on bridge or ceiling cranes, these bumpers protect walls or beams as well as extend crane life.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Slide these clamps into strut channel and snap closed for quick installation with no tools required. They are noncorrosive, nonconductive nylon.

These grips are nickel-plated brass for good corrosion resistance.

Suitable for use in applications where cords are underwater—these grips are rated IP68 for protection from prolonged submersion.

Keep moisture out of your enclosure while securing cords in wet environments. Made of polyamide, these grips are lightweight.

Able to withstand temperatures up to 300° F, these grips are also corrosion- and chemical-resistant.

Keep cords from coming loose and seal water out of enclosures in extremely cold labs and storage areas. Thanks to their plastic bushing and rubber O-ring, these grips withstand temperatures as low as -75° F.

Secure cords installed through enclosures and panels in wet environments while protecting them against sharp bends. With a flared end that keeps cords from bending without limiting too much motion, these grips extend cord life.

Secure installed cords in wet environments with temperatures up to 300° F while guarding them against sharp bends. These PVDF grips stand up to corrosion, chemicals, and heat, making them good for use in food and beverage plants as well as clean rooms that require high-temperature sanitizing.

The face of these grips is flush with the cable-entry point for a seamless appearance.

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Tapered prongs or a snap-in ring securely hold these plugs in place.