About Sleeving
More
Core Pins
Mold plastic around these pins to form small holes, or use them to perforate parts. They have a flat head to fit into a counterbored hole. Pins can be machined to fit your application. They're precision-ground to tight tolerances.
Copper pins cool faster than steel ones.
For technical drawings and 3-D models, click on a part number.
Head | ||||||
---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Dia. | Ht. | Min. Hardness | Each | |
3" Lg. | ||||||
3/32" | 0" to 0.001" | 1/4" | 1/8" | Rockwell C20 | 000000000 | 000000 |
1/8" | 0" to 0.001" | 1/4" | 1/8" | Rockwell C20 | 000000000 | 00000 |
5/32" | 0" to 0.001" | 9/32" | 5/32" | Rockwell C20 | 000000000 | 00000 |
11/64" | 0" to 0.001" | 11/32" | 3/16" | Rockwell C20 | 000000000 | 00000 |
3/16" | 0" to 0.001" | 3/8" | 3/16" | Rockwell C20 | 000000000 | 00000 |
13/64" | 0" to 0.001" | 3/8" | 3/16" | Rockwell C20 | 000000000 | 00000 |
7/32" | 0" to 0.001" | 13/32" | 3/16" | Rockwell C20 | 000000000 | 00000 |
1/4" | 0" to 0.001" | 7/16" | 3/16" | Rockwell C20 | 000000000 | 00000 |
9/32" | 0" to 0.001" | 7/16" | 1/4" | Rockwell C20 | 000000000 | 00000 |
5/16" | 0" to 0.001" | 1/2" | 1/4" | Rockwell C20 | 000000000 | 00000 |
3/8" | 0" to 0.001" | 5/8" | 1/4" | Rockwell C20 | 000000000 | 00000 |
7/16" | 0" to 0.001" | 11/16" | 1/4" | Rockwell C20 | 000000000 | 00000 |
1/2" | 0" to 0.001" | 3/4" | 1/4" | Rockwell C20 | 000000000 | 00000 |
9/16" | 0" to 0.001" | 13/16" | 1/4" | Rockwell C20 | 000000000 | 00000 |
5/8" | 0" to 0.001" | 7/8" | 1/4" | Rockwell C20 | 000000000 | 00000 |
3/4" | 0" to 0.001" | 1" | 1/4" | Rockwell C20 | 000000000 | 00000 |
Head | ||||||
---|---|---|---|---|---|---|
Dia. | Dia. Tolerance | Dia. | Ht. | Min. Hardness | Each | |
6" Lg. | ||||||
3/32" | 0" to 0.001" | 1/4" | 1/8" | Rockwell C20 | 000000000 | 000000 |
1/8" | 0" to 0.001" | 1/4" | 1/8" | Rockwell C20 | 000000000 | 00000 |
5/32" | 0" to 0.001" | 9/32" | 5/32" | Rockwell C20 | 000000000 | 00000 |
11/64" | 0" to 0.001" | 11/32" | 3/16" | Rockwell C20 | 000000000 | 00000 |
3/16" | 0" to 0.001" | 3/8" | 3/16" | Rockwell C20 | 000000000 | 00000 |
13/64" | 0" to 0.001" | 3/8" | 3/16" | Rockwell C20 | 000000000 | 00000 |
7/32" | 0" to 0.001" | 13/32" | 3/16" | Rockwell C20 | 000000000 | 00000 |
1/4" | 0" to 0.001" | 7/16" | 3/16" | Rockwell C20 | 000000000 | 00000 |
9/32" | 0" to 0.001" | 7/16" | 1/4" | Rockwell C20 | 000000000 | 00000 |
5/16" | 0" to 0.001" | 1/2" | 1/4" | Rockwell C20 | 000000000 | 00000 |
3/8" | 0" to 0.001" | 5/8" | 1/4" | Rockwell C20 | 000000000 | 00000 |
7/16" | 0" to 0.001" | 11/16" | 1/4" | Rockwell C20 | 000000000 | 00000 |
1/2" | 0" to 0.001" | 3/4" | 1/4" | Rockwell C20 | 000000000 | 00000 |
9/16" | 0" to 0.001" | 13/16" | 1/4" | Rockwell C20 | 000000000 | 00000 |
5/8" | 0" to 0.001" | 7/8" | 1/4" | Rockwell C20 | 000000000 | 00000 |
3/4" | 0" to 0.001" | 1" | 1/4" | Rockwell C20 | 000000000 | 00000 |
Interference-Shielding Expandable Sleeving
Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It’s expandable, so it stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. Cut with sheet metal snips.
Per Ft. | |||||||
---|---|---|---|---|---|---|---|
ID | Expanded ID | Wall Thick. | Temperature Range | Lengths, ft. | 1-99 | 100-Up | |
Tin-Coated Copper | |||||||
1/4" | 5/16" | 1/32" | Not Rated | 0000000 | 00000 | 00000 | |
3/8" | 7/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
1/2" | 9/16" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
25/32" | 7/8" | 1/32" | Not Rated | 0000000 | 0000 | 0000 | |
1" | 1 1/8" | 1/16" | Not Rated | 0000000 | 00000 | 0000 | |
1 1/8" | 1 1/4" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
1 1/4" | 1 3/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 | |
1 1/2" | 1 5/8" | 1/16" | Not Rated | 0000000 | 00000 | 00000 |
3D Printer Extruder Heating Elements
Replace damaged heating elements in your 3D printer, or switch them out to print at a faster speed or higher temperature. Also known as hotends, these heating elements receive filament from an extruder, melt it, and then pass it through a nozzle onto the part being printed. They are compatible with most fused filament fabrication (FFF) 3D printers. Changes to the heating element or temperature cartridge will also require a software update, or your printer may overheat.
Mosquito Heating
Element
Filament guides hold the filament as it melts in the heating block and moves toward the nozzle. Also known as heat breaks, they transition the filament from the cool area of the heat sink to the heating block.
Thread | |||||||
---|---|---|---|---|---|---|---|
For Filament Dia., mm | Overall Lg., mm | Lg., mm | Size | Pitch, mm | Material | Each | |
Mosquito | |||||||
1.75 | 30 | 4 | M6 | 1 | Copper, Stainless Steel | 0000000 | 000000 |