We will reply to your message within an hour.
More
Load material between the two halves of the ring and adjust the side bolts for a tighter fit than standard threaded-rod-mount clamping hangers.
Add an eye nut to threaded rod to hang the rod from rings, hooks, and hangers.
Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.
Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.
Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.
Combine track, mounting brackets, and hangers to create a system for hanging doors.
Keep sliding doors and panels from damaging walls and door frames.
Slide the shaft in to install, then tighten to secure. For use with light to medium loads where shaft alignment is not critical, these shaft supports brace the end of a linear shaft along the ground or other flat surface.
These fittings seal out liquids when connecting liquid-tight flexible metal conduit to a knockout in an outlet box or enclosure.
Attach conduit to a knockout in an outlet box or enclosure.
Join pieces of conduit.
Also known as conduit bodies, these ports provide access to wire and cable inside metal conduit for pulling, splicing, and maintenance. They are also used to change the direction of a run.