Inside Width Inside Width |
|---|
|
|
|
Material Material |
|---|
|
Outside Height Outside Height |
|---|
Outside Width Outside Width |
|---|
|
|
|
Wall Thickness Wall Thickness |
|---|
|
|
|
Aluminum Performance Properties Aluminum PerformanceProperties |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Yield Strength Yield Strength |
|---|
|
Hardness Hardness |
|---|
|
Certificate Certificate |
|---|
 | |
Heat Treatment Heat Treatment |
|---|
|
About Aluminum
More
About Carbon Steel, Alloy Steel, Spring Steel, and Cast Iron
More
About Stainless Steel
More
Architectural 6063 Aluminum H-Bars
- Yield Strength: 16,000 psi
- Hardness: Brinell 55 (Soft)
- Temper: T5
- Fabrication: Extruded
- Specifications Met: ASTM B221
More corrosion resistant and easier to form than multipurpose 6061 aluminum, 6063 is primarily used for exterior railings, decorative trim, and door frames.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Inside Wd. | Heat Treatment | Temperature Range, °F | Straightness Tolerance | 1 ft. Lg. | 3 ft. Lg. | 6 ft. Lg. | |
0.05" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.000" | -0.024" to 0.024" | 1.950" | 1.85" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
| 1.060" | -0.024" to 0.024" | 0.700" | 0.60" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
| 1.074" | -0.024" to 0.024" | 1.040" | 0.94" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
| 1.724" | -0.024" to 0.024" | 1.120" | 1.02" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.055" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 2.110" | 2.00" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.062" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 1.034" | 0.91" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.094" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 0.688" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1/8" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 2.000" | -0.024" to 0.024" | 2.000" | 1.75" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.188" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 1.500" | -0.024" to 0.024" | 0.876" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
0.2" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 2.400" | -0.024" to 0.024" | 1.750" | 1.35" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
1/4" Wall Thick. (-0.008" to 0.008" Tolerance) | ||||||||||
| 2.375" | -0.024" to 0.024" | 1.000" | 0.50" | Hardened | -320° to 212° | 0.050" per ft. | 0000000 | |||
Low-Carbon Steel H-Bars
- Yield Strength: 50,000 psi
- Hardness: Not Rated
- Heat Treatable: Yes
- Maximum Hardness After Heat Treatment: Not Rated
- Specifications Met: ASTM A992
Made of stiff low-carbon steel to deflect less under load, these H-bars are commonly used in machine bases, construction, platforms, and frames. Because of its rigidity, low-carbon steel is the most commonly used material for H-bars. These H-bars are less likely to crack from welding than those made of higher-carbon steels, and easier to weld than I-beams because they have a straight flange instead of a radius flange. H-bars are stronger than I-beams, but also heavier.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
Outside | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Wall Thickness | Wall Thickness Tolerance | Height | Height Tolerance | Width | Width Tolerance | Inside Width | Minimum Temperature, °F | Straightness Tolerance | 3 ft., Lg. | 6 ft., Lg. | |
| 0.215" | Not Rated | 3.94" | -0.188" to 0.250" | 5.9" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.26" | Not Rated | 5.99" | -0.188" to 0.250" | 5.99" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.28" | Not Rated | 4" | -0.188" to 0.250" | 6.03" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.345" | Not Rated | 4.06" | -0.188" to 0.250" | 4.16" | -0.125" to 0.125" | 3.47" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.365" | Not Rated | 6.02" | -0.188" to 0.250" | 6.2" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.4" | Not Rated | 5.27" | -0.188" to 0.250" | 8.28" | -0.125" to 0.125" | 7.48" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.435" | Not Rated | 7.995" | -0.188" to 0.250" | 8" | -0.125" to 0.125" | 7.13" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.455" | Not Rated | 6.08" | -0.188" to 0.250" | 6.38" | -0.125" to 0.125" | 5.47" | Not Rated | 0.025" per ft. | 0000000 | ||
| 0.56" | Not Rated | 8.07" | -0.188" to 0.250" | 8.25" | -0.125" to 0.125" | 7.13" | Not Rated | 0.025" per ft. | 0000000 | ||
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Bars with sheared edges are also known as Gauer bar and are sheared from plate.
H-bars have larger flange widths and thicknesses than I-beams, so they’re stronger and carry heavier loads, yet also weigh more.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ORDER HISTORY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: Rockwell B80 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A240
Outside | Corner Shape | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Inside Wd. | Fabrication | Edge Fabrication | Outside | Inside | Straightness Tolerance | 3 ft. Lg. | 6 ft. Lg. | |
0.26" Wall Thick. | ||||||||||||
| 5.99" | -1/8" to 1/8" | 5.99" | -0.188" to 1/4" | 5.47" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.33" Wall Thick. | ||||||||||||
| 5 1/4" | -1/8" to 1/8" | 8.14" | -0.188" to 1/4" | 7.48" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.345" Wall Thick. | ||||||||||||
| 4.06" | -1/8" to 1/8" | 4.16" | -0.188" to 1/4" | 3.47" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.365" Wall Thick. | ||||||||||||
| 6.02" | -1/8" to 1/8" | 6.2" | -0.188" to 1/4" | 5.47" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.4" Wall Thick. | ||||||||||||
| 6.495" | -1/8" to 1/8" | 7.93" | -0.188" to 1/4" | 7.13" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
0.435" Wall Thick. | ||||||||||||
| 7.995" | -1/8" to 1/8" | 8" | -0.188" to 1/4" | 7.13" | Welded | Sheared | Square | Square | 0.0625" per 6 ft. | 0000000 | ||
Panel Connecting Trim
Connect two panels while protecting the edges from damage. Push this trim onto an edge and its tight grip holds it in place. Since all of this trim is rigid and does not bend, it's designed for straight surfaces. Made of aluminum, it's lightweight and offers good corrosion resistance. It can be used outdoors.
For technical drawings and 3-D models, click on a part number.
| Inside Wd. (A) | Outside Ht. (B) | Inside Ht. (D) | Short Leg Outside Ht. (F) | Thick. | Flexibility | For Use Outdoors | Appearance | Each | |
3-ft. Length | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Aluminum | |||||||||
Style 1 | |||||||||
| 5/32" | 1 3/64" | __ | __ | 3/64" | Rigid | Yes | Dull | 000000 | 000000 |
| 17/64" | 1 3/64" | __ | __ | 3/64" | Rigid | Yes | Dull | 000000 | 00000 |
Style 2 | |||||||||
| 1/16" | 1" | __ | 5/16" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 7/64" | 1 1/4" | __ | 5/8" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 11/64" | 1 1/4" | __ | 1/2" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 1/4" | 1 3/8" | __ | 1/2" | 3/64" | Rigid | Yes | Polished | 000000 | 00000 |
| 19/64" | 1 1/4" | __ | 1/2" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 33/64" | 1 1/4" | __ | 5/8" | 1/16" | Rigid | Yes | Dull | 0000000 | 00000 |
Style 3 | |||||||||
| 11/64" | 7/64" | 11/16" | __ | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 19/64" | 39/64" | 53/64" | __ | 3/64" | Rigid | Yes | Dull | 000000 | 00000 |
Style 4 | |||||||||
| 9/32" | 1/2" | 39/64" | __ | 3/64" | Rigid | Yes | Polished | 00000000 | 00000 |
6-ft. Length | |||||||||
Aluminum | |||||||||
Style 1 | |||||||||
| 5/32" | 1 3/64" | __ | __ | 3/64" | Rigid | Yes | Dull | 000000 | 00000 |
| 17/64" | 1 3/64" | __ | __ | 3/64" | Rigid | Yes | Dull | 000000 | 00000 |
Style 2 | |||||||||
| 1/16" | 1" | __ | 5/16" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 7/64" | 1 1/4" | __ | 5/8" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 11/64" | 1 1/4" | __ | 1/2" | 3/64" | Rigid | Yes | Dull | 0000000 | 00000 |
| 1/4" | 1 3/8" | __ | 1/2" | 3/64" | Rigid | Yes | Polished | 000000 | 00000 |
| 19/64" | 1 1/4" | __ | 1/2" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 33/64" | 1 1/4" | __ | 5/8" | 1/16" | Rigid | Yes | Dull | 0000000 | 00000 |
Style 3 | |||||||||
| 11/64" | 7/64" | 11/16" | __ | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 19/64" | 39/64" | 53/64" | __ | 3/64" | Rigid | Yes | Dull | 000000 | 00000 |
Style 4 | |||||||||
| 9/32" | 1/2" | 39/64" | __ | 3/64" | Rigid | Yes | Polished | 00000000 | 00000 |
8-ft. Length | |||||||||
Aluminum | |||||||||
Style 1 | |||||||||
| 5/32" | 1 3/64" | __ | __ | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 17/64" | 1 3/64" | __ | __ | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
Style 2 | |||||||||
| 1/16" | 1" | __ | 5/16" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 7/64" | 1 1/4" | __ | 5/8" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 11/64" | 1 1/4" | __ | 1/2" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 1/4" | 1 3/8" | __ | 1/2" | 3/64" | Rigid | Yes | Polished | 00000000 | 00000 |
| 19/64" | 1 1/4" | __ | 1/2" | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 33/64" | 1 1/4" | __ | 5/8" | 1/16" | Rigid | Yes | Dull | 00000000 | 00000 |
Style 3 | |||||||||
| 11/64" | 7/64" | 11/16" | __ | 3/64" | Rigid | Yes | Dull | 00000000 | 00000 |
| 19/64" | 39/64" | 53/64" | __ | 3/64" | Rigid | Yes | Dull | 0000000 | 00000 |
Style 4 | |||||||||
| 9/32" | 1/2" | 39/64" | __ | 3/64" | Rigid | Yes | Polished | 00000000 | 00000 |
Water-and Weather-Resistant Push-On H-Seals
Use these H-seals to lock out moisture, dust, and debris around windows and panels. Made of EPDM rubber, they resist water, sunlight, and ozone.
For technical drawings and 3-D models, click on a part number.
| Fits Edge Thick. | Width | Height | Grip Height | Grip Material | Hardness | Hardness Rating | Temp. Range, °F | For Use Outdoors | Color | Each | |
10 ft. Lg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
EPDM Rubber | |||||||||||
| 0.063" | 5/16" | 3/8" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 000000 |
| 0.094" | 1/4" | 3/8" | 5/32" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.125" | 1/4" | 3/8" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.125" | 1" | 2 1/2" | 1/2" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 000000 |
| 0.188" | 7/16" | 2" | 29/32" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
25 ft. Lg. | |||||||||||
EPDM Rubber | |||||||||||
| 0.063" | 5/16" | 3/8" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.094" | 1/4" | 3/8" | 5/32" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.125" | 1/4" | 3/8" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.188" | 7/16" | 2" | 29/32" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 000000 |
50 ft. Lg. | |||||||||||
EPDM Rubber | |||||||||||
| 0.063" | 5/16" | 3/8" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 000000 |
| 0.094" | 1/4" | 3/8" | 5/32" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.125" | 1/4" | 3/8" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| Fits Edge Thick. | Width | Height | Grip Height | Grip Material | Hardness | Hardness Rating | Temp. Range, °F | For Use Outdoors | Color | Each | |
10 ft. Lg. | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
EPDM Rubber | |||||||||||
| 0.063" | 3/8" | 5/8" | 1/4" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 000000 |
| 0.063" | 3/8" | 1" | 5/16" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.083" | 5/16" | 1/2" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.125" | 9/32" | 23/64" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.25" | 9/16" | 3/4" | 5/16" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
25 ft. Lg. | |||||||||||
EPDM Rubber | |||||||||||
| 0.063" | 3/8" | 5/8" | 1/4" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.063" | 3/8" | 1" | 5/16" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.083" | 5/16" | 1/2" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.125" | 9/32" | 23/64" | 1/8" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |
| 0.25" | 9/16" | 3/4" | 5/16" | EPDM Rubber | Durometer 70A | Hard | -30° to 200° | Yes | Black | 00000000 | 00000 |