Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately). They cannot be sold to California due to local energy efficiency requirements.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style B work with LED, CFL, halogen, and incandescent bulbs (sold separately). Lights with a zinc housing are more impact resistant than those with an aluminum housing.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

Hang these lights where you need them on the job site.

Styles J, K, and L are compatible with medium-base screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately), except 1550K33 is compatible with medium-base screw-in incandescent and LED bulbs. Styles J and K have a steel guard to protect the bulb. Style L have an impact-resistant plastic lens.

For technical drawings and 3-D models, click on a part number.

With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.

The gooseneck arm on this light allows you to direct light exactly where it's needed. It has a reflector that distributes light more evenly than other portable lights. A mounting clip at the base lets you attach it to a nearby surface. This light comes with a CFL (compact fluorescent) bulb; it is also compatible with medium-base, screw-in halogen, incandescent, and LED bulbs (sold separately). It cannot be sold to the regions listed due to local energy efficiency requirements and limits on mercury content.

For technical drawings and 3-D models, click on a part number.

Because these lights have a reflector, they distribute light more evenly than other portable lights. A mounting clip at the base lets you attach them to nearby surfaces.

Style A and B are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Style C come with an LED bulb; however, are also compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and infrared bulbs.

Style D are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, infrared, and LED bulbs (sold separately).

Lights that cannot be sold to California do not meet local energy efficiency requirements.

For technical drawings and 3-D models, click on a part number.

Create a high-intensity lighting system for inspecting small and microscopic parts. To create a complete lighting system, you need a fiber-optic light, fiber-optic cable, and an adapter to connect the cable to the light. They cast a neutral white light often found in workspaces.

Add a probe to 1/8" dia. fiber-optic cables to illuminate small areas that have recessed or deep orifices.

Pair a focusing lens with a positionable cable to create a concentrated beam of light on your work.

These lights swing out from the wall to illuminate loading docks and trailers. They have a steel arm, plastic lens, and switch. All have a cord with three-prong plug and operate on 120 volts AC. Lights have four mounting holes (hardware not included, except Style E includes hardware). All are yellow.

Styles A-D are compatible with medium-base CFL (compact fluorescent), halogen, and incandescent bulbs (sold separately). Some also work with LED bulbs. All have a zinc-plated steel guard to protect the lens.

Lights cannot be sold to the listed areas due to energy efficiency requirements.

Replacement light heads come with a steel guard to protect the lens. Steel heads are stronger and more durable than plastic heads. Plastic heads don’t heat up as much as steel heads, and won’t dent as easily.

This light is sealed to withstand shallow water, such as ponds and fountains. It has a durable tempered-glass lens to protect the bulb. It's furnished with a halogen bulb that casts a warm, yellow-toned light that's similar in apprearance to incandescent lights.

These bulbs produce a narrower, more concentrated beam of light than floodlight bulbs. Brightness is measured in lumens; the higher the lumens, the brighter the bulb. Bulbs with a warm light appearance have yellow tones. Bulbs with a neutral light appearance are commonly used in workspaces. Bulbs with a cool light appearance have white/blue tones and are good for inspecting. A bulb’s estimated yearly energy cost is based on 3 hours of usage per day at $0.11 per kWh.

PAR bulbs have narrow beam angles that provide more focused beams of light than other spotlights. A short length allows them to fit in small can fixtures without protruding.

Halogen bulbs are slightly more energy efficient than incandescent bulbs, but they generate more heat. Bulbs that cannot be sold to the listed regions do not meet energy efficiency requirements.

These bulbs are small, but very bright, so they're often used in flashlights and optical instruments such as projectors and microscopes. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Halogen bulbs are slightly more energy efficient than incandescent bulbs, but they generate more heat.

The sealed assembly withstands the rigors of outdoor use. In addition to using these bulbs in vehicles, they can be used for spot, flood, and emergency lighting. Brightness is measured in lumens; the higher the lumens, the brighter the bulb.

Halogen bulbs are slightly more efficient than incandescent, but they generate more heat.

Hardwire these sockets to a power source.

For technical drawings and 3-D models, click on a part number.

Use these extenders when bulbs are too short to fit into deep or recessed fixtures.

For technical drawings and 3-D models, click on a part number.

Position these lamps at any angle to heat, dry, soften, or defrost. They’re also known as infrared and radiant heaters.

Note: Do not use in hazardous locations, such as enclosed areas exposed to fumes.