Replace faces when they become worn rather than replacing the entire tool. These mallets are suitable for driving chisels and striking work without damaging its surface.

A fluorescent orange color makes these mallets easy to see. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. All are suitable for driving chisels and striking work without damaging its surface.

The head on these mallets is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to drive chisels and strike work without damaging its surface.

Match a mallet body with different face materials to create the perfect striking tool. The head is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use mallets to drive chisels and strike work without damaging its surface.

Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

These hammers have a head loaded with metal shot for added weight and a controlled impact with minimal rebound. Use the domed end of the head for forming soft metal, rounding off edges, and closing rivets. The flat striking face is for driving nails, pins, punches, and chisels.

Demolish material, form metal, and drive punches, chisels, and masonry drills.

The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.

Change out the faces when they become worn. The head on these hammers is loaded with metal shot for added weight and a controlled impact with minimal rebound. Use them to demolish material, form metal, and drive punches, chisels, and masonry drills.

The face and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use them to drive and remove nails.

The faces and head are made of aluminum-bronze that is Factory Mutual approved, so these tools inhibit sparking and are nonmagnetic and corrosion resistant. Use the flat end of the head to strike metal, concrete, and stone; the wedge-shaped end is for shaping and bending metal.

Similar to a sledge hammer but with a longer, slimmer head, these tools are used to drive spikes or punch out pins. They're also known as spike mauls.

Pry, shape, chip, and cut masonry and stone.

These palm-sized tools fit in tight spaces and use air to deliver a powerful strike where swinging a hammer is not possible. Replace faces when they are worn, or switch to a face with a different material or hardness.

Chip and scrape away weld spatter, paint, and rust.

Strike work in tight spaces where standard hammers don't have room to swing. The steel face on these hammers is hard enough to demolish material and drive pins, punches, and masonry drills.

Replace faces on a compatible hammer or mallet head or switch to a face with a different hardness.

Durable and impact resistant, these handles won't split like wood can. Match the handle to the head opening size and shape of your tool.

Assortments include wedges for different sizes of hammer as well as axes. Drive wedges into the tool's handle to create a snug fit for the head.

Place on the back side of your workpiece to act as a support when you strike it. Also known as dolly blocks.

Made of aluminum-bronze that is FM approved, these chisels satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Use with air-powered pavement-breaker hammers.

Also known as United States Navy (U.S.N.)-style chisels, these tools have an oval or round collar on the shank.

The SDS-Plus shank has two deep slots and two shallow slots for use with SDS-Plus-drive rotary hammers.

Made of aluminum-bronze that is Factory Mutual approved, these chisels inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Use with Air-Powered Needle Scalers/Chiseling Hammers.

Also known as jumbo shank chisels.

Use for cutting, chipping, scraping, and staking.

Thread the retainer onto your tool for easy chisel changes—pull back on the retainer to insert or remove the chisel.

Break through concrete walls and floors.

More powerful than Air-Powered Chiseling Hammers, these tools are often used for heavy material removal in foundry and fabrication shops.

Break through concrete walls and floors. Also known as rivet busters.

These needles are beryllium copper.

Change the blows-per-minute by varying the pressure on the speed control.

Small needles gently tap surfaces to remove unwanted rust, scale, paint, and weld spatter.

These scalers produce 80-90% less vibration than other scaling tools.

Remove weld flux and spatter as well as perform a variety of light chipping applications.

Designed to drill larger holes than a SDS-drive hammer. For use with spline-shank drill bits.

A deeper drive system minimizes wobble for straighter, more accurate holes and better overall performance to other rotary hammers. For use with SDS-Max drill bits.

Push a switch and these DeWalt drills change from a standard electric drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.

Push a switch and these Milwaukee drills change from a standard electric drill to a hammer drill. The hammering action pounds concrete and masonry, which breaks up the material while it drills.

A powerful and durable hammer mechanism lets you drill deeper, larger holes in masonry and concrete in less time than with cordless hammer drills.

Get the tools you need in an easy-to-carry DeWalt combination kit.

Place against the back side of your rivet while hammering the head.

Also known as zip guns, use these air hammers with a rivet setter and a bucking bar to install solid rivets.

A hammer and punch in one, this tool knocks out pins, rivets, and bolts.