Hammer Type Hammer Type | Show |
|---|
 | Palm Grip |
Hammer Type Hammer Type | Hide |
|---|
 |  |
| Mallet | Ball Peen |
 |  |
| Dead Blow | Sledge |
 |  |
| Nail | Blacksmith |
 |  |
| Sheet Metal Forming | Riveting |
 |  |
| Tack | Masonry |
 | |
| Welding | Palm Grip |
 |  |
| Delicate Metal Forming | Slide Sledge |
 | |
| Spike |
Face Mount Type Face Mount Type |
|---|
 | Screw In |
Faces Replaceable Faces Replaceable |
|---|
|
Face Shape Face Shape |
|---|
 | Round |
Face Thread Type Face Thread Type |
|---|
|
Face Color Face Color |
|---|
 | Yellow |
Face Hardness Rating Face Hardness Rating |
|---|
|
Air Inlet Pipe Size Air Inlet Pipe Size |
|---|
Air Inlet Thread Type Air Inlet Thread Type |
|---|
|
Average Air Consumption Average Air Consumption |
|---|
|
Maximum Blows per Minute Maximum Blows per Minute |
|---|
|
Power Source Power Source |
|---|
|
Air Inlet Gender Air Inlet Gender |
|---|
|
For Air Hose ID For Air Hose ID |
|---|
|
Recommended Operating Air Pressure RecommendedOperating Air Pressure |
|---|
|
About Hammers
More
About Plastic Hammer Faces
More
Palm Grip Hammers
No handle means precise control for tapping work into position. These hammers can be used in tight spaces where standard hammers don't have room to swing. The replaceable faces have a hardness similar to that of a hard hat. A hex-shaped body keeps the hammer from rolling when you set it down.
Air-Powered Palm Grip Hammers
These palm-sized tools fit in tight spaces and use air to deliver a powerful strike where swinging a hammer is not possible. Replace faces when they are worn, or switch to a face with a different material or hardness.
Polyurethane rubber faces are softer than metal faces, so they're good for striking plastic, wood, and sheet metal. All have a face hardness rating for comparing their hardness with other rubber faces. Extra-soft faces have a hardness similar to that of a pencil eraser. Soft faces have a hardness similar to that of a tire tread. Medium faces have a hardness that's suitable for most general purpose applications. Hard faces have a hardness similar to that of a bowling ball.
Aluminum faces are for use on brass, copper, and steel.
Steel faces are the hardest metal faces we offer. Use them to drive chisels, masonry drills, and nails.
Leather cover (sold separately) provides a comfortable grip and muffles sound.
Face | Air Inlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Hardness Rating | Color | Dia. | Thread Size | Head Wt., lbs. | Overall Lg. | Max. Blows per Minute | Pipe Size | Thread Type | Gender | For Air Hose ID | Recommended Operating Air Pressure, psi | Average Air Consumption, cfm | Each | |
| Polyurethane Rubber | Hard | Yellow | 1 1/2" | 5/16"-18 | 2 | 3 1/2" | 1,000 | 1/4 | NPT | Female | 3/8" | 60-125 | 4 | 0000000 | 0000000 |
| Steel | __ | __ | 1 1/2" | 5/16"-18 | 2 | 3 1/2" | 1,000 | 1/4 | NPT | Female | 3/8" | 60-125 | 4 | 0000000 | 000000 |
