The handle curves sharply for cleaning in hard-to-reach spots.

Turn the handle to expose more bristles as they wear.

Use two types of bristles on one brush to remove light-to-medium rust and stains and small burs.

The handle curves sharply for cleaning in hard-to-reach spots.

Turn the handle to expose more bristles as they wear.

These brushes have a 20 1/2" long handle.

Made of phosphorus bronze that is Factory Mutual approved, the bristles on these brushes inhibit sparking and are nonmagnetic and corrosion resistant.

These sets include brushes in the most common screw sizes.

Attach the shank to a handle or power tool.

Keep a variety of brushes on hand to clean surfaces inside tubes, pipes, and holes where scratching is a concern.

Attach the shank to a handle or power tool.

The handle makes it easy to clean tubes, pipes, and holes by hand.

Grip the handles on these brushes for extra leverage when cleaning tubes, pipes, and holes by hand.

The long shaft on these brushes snakes around curves to reach deep into tubes.

Attach the shank to a handle or power tool.

Remove light to medium rust, stains, and small burs from tubes, pipes, and holes.

The handle makes it easy to brush by hand.

Abrasive grains are embedded in the entire length of the bristles to remove workpiece material as well as surface contamination in a single step.

Use for soft and hard deposits.

Sets include an assortment of brushes for cleaning the inside and outside of tubes.

Commonly used before soldering, these brushes clean the outside of tubes.

Bristles inside the housing and a protruding brush clean the inside and outside of tubes in one step. Sets include brushes for three different tube sizes.

Clean the inside and outside of a tube with one brush.

Bend these brushes through curved holes and reach into corners.

Steel bristles remove weld slag and heavy surface contamination.

Bristles are made from chemical-resistant materials.

Made with metal and chemical additives, the bristles and handles on these brushes won’t get past metal detectors or X-ray machines in your food facility.

Chemical-resistant plastic bristles are flexible and narrow, making them a good choice for a variety of spills in small spaces.

Scrub the gunk out of floor drains and mop sinks.

Bristles remain on the floor whether you're standing or bending, helping you clean hard-to-reach areas like corners, baseboards, up walls, or under equipment.

Clean hard-to-reach areas in pharmaceutical and food-processing plants—these scrub brushes have metal and chemical additives that set off metal detectors and show up on an X-ray if they fall into your line.

Curl these brushes around countertop edges, faucets, and pipes for thorough cleaning.

The handle bends to any angle for hard-to-reach applications.

The tips of these swabs are soaked with isopropyl alcohol.

These swabs dissipate static electricity and are often used for cleaning electronic components.

With a blend of soft natural hair and conductive synthetic fibers, these brushes dissipate static without scratching surfaces.

These uniquely shaped brushes wrap around overhead pipes and other curved surfaces to remove dust and dirt.

Brushes have natural bristles, which are better for oil- and solvent-based paint and coatings than synthetic bristles. Also known as chip brushes, these brushes are often used to brush away loose paint, rust, and metal. They are meant for one-time use with paint, coatings, adhesives, and paint removers.

These brushes have a round, tapered handle that can be held like a pencil for superior control while edging. Their flat shape is best for painting flat, even surfaces. Use with oil- and solvent-based paint and coatings.

Also known as radiator brushes, these brushes have a long, thin handle with an angled head to reach behind and around objects. They’re made with natural bristles, which are better for oil- and solvent-based paint and coatings than synthetic bristles.

Paint flat, even surfaces with these brushes. They're made with natural bristles, which are better for oil- and solvent-based paint and coatings than synthetic bristles.

Use these angled brushes for detailed applications, such as in corners and on narrow surfaces. They’re made with natural bristles, which are better for oil- and solvent-based paint and coatings than synthetic bristles.

Designed with a long fluted handle, these brushes provide control when gripped anywhere along the length, even at the end for extra reach. Use them to apply oil- and solvent-based paint and coatings in detailed applications, such as in corners and on narrow surfaces.

Also known as radiator brushes, these brushes have a long, thin handle with an angled head to reach behind and around objects. Their synthetic bristles won’t absorb water, so they keep their shape when used with latex paint and other water-based paint and coatings.

Designed with a long fluted handle, these brushes provide control when gripped anywhere along the length, even at the end for extra reach. Use with latex paint and other water-based paint and coatings on flat, even surfaces.

For comfort and control in tight spaces, these brushes have a short, flexible handle that's coated with rubber so it won't slip. Use with latex paint and other water-based paint and coatings.

These brushes have ultra-stiff bristles to create clean edges in corners and on narrow surfaces, even when used with low-VOC paint and other thick water-based paint and coatings.

Brushes have natural bristles, which are better for oil- and solvent-based paint and coatings than synthetic bristles. The smallest brushes we sell, use these for precision applications.

Take on a variety of touch-up jobs with these lightweight, disposable foam brushes. Each set includes a 1", 2", and 3" foam brush.

After washing brushes and roller covers, insert the paint brush handle into the end of these cleaners or slide the roller cover over them and pump the handle to spin dry.

No need to clean brushes and roller-covers between coats of paint when using these storage containers, which have an airtight foam seal to prevent those tools from drying out.

Use rollers to apply sealants and coatings to concrete and asphalt.

Tiny spikes covering these rollers release trapped gas when rolled over thick self-leveling floor coatings to promote adhesion and aid in the self-leveling process.

These paint rollers conform to round surfaces up to 2 ½" diameter.

These frames have a telescoping handle that extends from 18" to 34".

These short, narrow rollers cover areas where standard paint rollers won't fit.

Keep roller covers secure with the gripping tabs on these frames.

Quickly paint round surfaces as small as 1" and up to 10 feet in diameter. The two rollers adjust in 30° increments, so you can adjust the angle to suit your application.

For quick jobs without the clean-up, these rollers come with a small plastic tray.

These short, narrow roller covers fit behind and between objects.

Use these frames to cover large, flat surfaces quickly.

Made from foam, these paint roller covers don't have any fibers to shed and leave a smooth finish.

These paint roller covers are woven, so they resist shedding fibers and leave a smoother finish than knitted covers.

These long, thin brushes have semi-soft bristles to smooth out wrinkles and air bubbles after wall coverings are applied without damaging the wall covering itself.

The sharp bristles clear metal shavings from file teeth. Also known as file cards.

The handle is a cartridge that dispenses ink into the brush with the push of a button.