About Torque Tools
More
Flex-Head Wrench Handles


Access fasteners in tight spots by pivoting the head to an optimal angle. These nonratcheting wrench handles are also known as breaker bars—they’re long enough for you to get the leverage needed to break stuck fasteners free.
Chrome-plated wrench handles are shiny and corrosion resistant. Their surface is easier to clean than black-oxide wrench handles.
Overall Lg. | Flex Range of Motion | Material | Finish | Each | |
1/4" Square Drive | |||||
---|---|---|---|---|---|
5 3/4" | 180° | Steel | Chrome Plated | 0000000 | 000000 |
Sliding T-Style Wrench Handles

Position the head anywhere along the handle. Also known as breaker bars, use these nonratcheting handles to get the high torque required to break stuck fasteners free.
Overall Lg. | Material | Finish | Each | |
1/4" Square Drive | ||||
---|---|---|---|---|
4 1/2" | Steel | Chrome Plated | 0000000 | 000000 |
T-Style Wrench Handles

Grip one side of the handle in each hand and twist to free stubborn fasteners. These wrench handles have a long shaft, so you can access hard-to-reach spots without a socket extension. They’re also known as breaker bars.
Overall Lg. | Material | Finish | Each | |
1/4" Square Drive | ||||
---|---|---|---|---|
7 3/4" | Steel | Chrome Plated | 00000000 | 000000 |
Folding Screwdriver-Style Socket Handles


For more leverage to tighten or loosen fasteners compared to standard screwdriver-style socket handles, you can fold these handles 90 degrees. Flip the handle up straight to tackle fasteners in tight spaces.
Overall Lg. | Folded Lg. | Folding Handle Range of Motion | Material | Grip Material | Each | |
1/4" Square Drive | ||||||
---|---|---|---|---|---|---|
6 1/4" | 4" | 90° | Chrome-Plated Steel | Rubber | 00000000 | 000000 |
Ultra-Grip Screwdriver-Style Socket Handles

A soft, contoured grip gives you a secure, comfortable hold. Use these handles to tighten and loosen sockets from above when there isn’t room to swing a standard wrench.
Overall Lg. | Material | Grip Material | Each | |
1/4" Square Drive | ||||
---|---|---|---|---|
6 1/2" | Chrome-Plated Steel | Rubber | 00000000 | 00000 |
Ratchet Wrenches


A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Chrome-plated wrenches are shiny and corrosion resistant. They have a smooth surface, so they’re easier to clean than black-oxide wrenches.
Black-oxide wrenches are easier to grip when dirty or wet because they’re not as smooth as chrome-plated wrenches. To prevent rust, oil them periodically.
Repair kits (sold separately) let you replace a damaged ratcheting mechanism.
Wrenches | Ratchet Repair Kits | ||||||
---|---|---|---|---|---|---|---|
Overall Lg. | Turn Required to Ratchet | Head Shape | Material | Each | Each | ||
1/4" Square Drive | |||||||
3" | 4° | Round | Chrome-Plated Steel | 0000000 | 000000 | 000000 | 00 |
4 1/2" | 5° | Round | Black-Oxide Steel | 00000000 | 00000 | 00000000 | 000000 |
4 1/2" | 5° | Round | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 00000 |
5" | 15° | Oval | Black-Oxide Steel | 00000000 | 00000 | 00000000 | 00000 |
5" | 15° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 00000 |
6 5/8" | 4° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 00000 |
8" | 4° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 00000 |
12" | 4° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 00000 |
Sealed-Head Ratchet Wrenches with Tether Ring

When you’re working up high, keep these wrenches secure at your side. Hook their tether ring to a carabiner or lanyard (not included), so they won’t fall to the ground if dropped. They have a gasket on their head that seals lubrication in and keeps contaminants out. A ratchet mechanism allows you to turn fasteners without removing and repositioning. The smaller the turn needed to ratchet, the less clearance you need to engage the ratchet.
Black-oxide wrenches are easier to grip when dirty or wet because they’re not as smooth as chrome-plated wrenches. To prevent rust, oil them periodically.
Chrome-plated wrenches are shiny and corrosion resistant. They have a smooth surface, so they’re easier to clean than black-oxide wrenches.
Repair kits (sold separately) let you replace a damaged ratcheting mechanism.
Sealed-Head Quick-Release Ratchet Wrenches

Built for tough industrial conditions, these wrenches have a gasket that seals lubrication in and keeps dirt, dust, and moisture out to protect the ratchet mechanism. When it’s time to release the socket, just push the button on the back of the wrench head. These wrenches have a ratchet mechanism that allows you to turn fasteners without removing and repositioning the tool. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Chrome-plated wrenches are shiny and corrosion resistant. They have a smooth surface, so they’re easier to clean than black-oxide wrenches.
Overall Lg. | Turn Required to Ratchet | Head Shape | Material | Each | |
1/4" Square Drive | |||||
---|---|---|---|---|---|
5 3/4" | 8° | Oval | Chrome-Plated Steel | 0000000 | 000000 |
Sealed-Head Ratchet Wrenches

Sealed against dust, dirt, and moisture, these wrenches can be used in greasy machine shops and dusty construction sites. A gasket on their head locks lubrication in and keeps contaminants out. They have a ratchet mechanism, so you can turn fasteners without removing and repositioning. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Black-oxide wrenches are easier to grip when dirty or wet because they’re not as smooth as chrome-plated wrenches. To prevent rust, oil them periodically.
Chrome-plated wrenches are shiny and corrosion resistant. They have a smooth surface, so they’re easier to clean than black-oxide wrenches.
Wrenches with a plastic grip have a cushioned handle.
Repair kits (sold separately) let you replace a damaged ratcheting mechanism.
Wrenches | Ratchet Repair Kits | |||||||
---|---|---|---|---|---|---|---|---|
Overall Lg. | Turn Required to Ratchet | Head Shape | Material | Grip Material | Each | Each | ||
1/4" Square Drive | ||||||||
5 1/4" | 10° | Oval | Black-Oxide Steel | __ | 00000000 | 000000 | 00000000 | 000000 |
5 1/2" | 8° | Oval | Chrome-Plated Steel | __ | 0000000 | 00000 | 00000000 | 00000 |
6 7/8" | 4° | Oval | Chrome-Plated Steel | Plastic | 00000000 | 00000 | 00000000 | 0000 |
8 1/8" | 4° | Oval | Chrome-Plated Steel | Plastic | 00000000 | 00000 | 00000000 | 0000 |
9" | 3° | Oval | Chrome-Plated Steel | __ | 00000000 | 00000 | 00000000 | 00000 |
Adjustable-Length Ratchet Wrenches

The shaft on these wrenches extends and locks at set increments. A ratchet mechanism allows you to turn fasteners without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Use repair kits to replace a damaged ratcheting mechanism.
Twist-Handle Ratchet Wrenches

Also known as rotator ratchets, these wrenches let you rotate the grip to tighten a socket. They're useful when you don't have the space to swing the handle side to side. When you do have the room, you can use them like a traditional ratchet wrench.
Overall Lg. | Turn Required to Ratchet | Head Shape | Material | Grip Material | Each | |
1/4" Square Drive | ||||||
---|---|---|---|---|---|---|
7 1/4" | 6° | Oval | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Quick-Release Ratchet Wrenches

No need to pull the socket off these wrenches—push a button to release it. They have a ratchet mechanism that allows you to turn fasteners without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Standard wrenches are built to last. They come from industrial brands, such as Tekton and Gearwrench. Repair kits (sold separately) let you replace a damaged ratcheting mechanism.
Economy wrenches come from high-quality consumer brands, such as Crescent and DeWalt. They may wear out more quickly than standard wrenches.
Wrenches | Ratchet Repair Kits | ||||||
---|---|---|---|---|---|---|---|
Overall Lg. | Turn Required to Ratchet | Head Shape | Material | Each | Each | ||
Standard | |||||||
1/4" Square Drive | |||||||
3 1/2" | 4° | Oval | Chrome-Plated Steel | 00000000 | 000000 | 00000000 | 00000 |
6 5/8" | 4° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 0000 |
9 1/2" | 4° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 00000000 | 0000 |
Economy | |||||||
1/4" Square Drive | |||||||
5 1/8" | 5° | Oval | Chrome-Plated Steel | 00000000 | 00000 | 000000 | 00 |
Adjustable-Length Quick-Release Ratchet Wrenches

Extend the length of these wrenches for more reach—the shaft locks into place at set increments. When it’s time to change your socket, release it with the push of a button. These wrenches have a ratchet mechanism that allows you to turn fasteners without removing and repositioning the tool. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Overall Lg. | Lg. Adjustment Increments | Turn Required to Ratchet | Head Shape | Material | Grip Material | Each | |
1/4" Square Drive | |||||||
---|---|---|---|---|---|---|---|
6"-8" | 2" | 5° | Oval | Chrome-Plated Steel | Rubber | 00000000 | 000000 |
Dual-Size Ratchet Wrenches

Flip between 1/4" and 3/8" drive-size sockets without switching out your wrench. These ratchet wrenches are an efficient choice for maintenance tasks that involve a broad range of bolt sizes. They're even used for military aircraft repairs in the field—they're also known as crew chief ratchets. An open-head design makes them narrower than sealed-head ratchet wrenches for use in tight spaces. For easy cleaning, turn the exposed ratchet with your fingers to dislodge dirt. This design also allows you to use them like a finger ratchet and get a precise feel for bolt tightness.
Add a ratchet repair kit to replace a damaged ratcheting mechanism.
Foreign Object Damage (FOD) Prevention Ratchet Wrenches

With no internal screws, these ratchet wrenches don’t have a single small part that could fall into and damage equipment. They help you comply with Foreign Object Damage (FOD) prevention plans to shield sensitive machinery, such as engines and electronics, from damage. For added protection against falling parts, a positive-locking push button ensures you don’t release your socket during use.
Overall Lg. | Turn Required to Ratchet | Head Shape | Material | Each | |
1/4" Square Drive | |||||
---|---|---|---|---|---|
3 1/2" | 4.5° | Oval | Chrome-Plated Steel | 00000000 | 000000 |
Flex-Head Ratchet Wrenches




Pivot the head on these wrenches to access fasteners in tight spots. These wrenches also have a ratcheting mechanism, so you don’t need to remove or reposition them to turn fasteners. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Wrenches with a rubber or plastic grip are cushioned for a comfortable grip.
Wrenches with a lockable flex head have a lever that fixes the head in place.
Repair kits (sold separately) let you replace a damaged ratcheting mechanism.
Wrenches | Ratchet Repair Kits | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Overall Lg. | Turn Required to Ratchet | Head Shape | Flex Range of Motion | Material | Grip Material | Features | Each | Each | ||
1/4" Square Drive | ||||||||||
3" | 4.5° | Oval | 180° | Chrome-Plated Steel | __ | __ | 00000000 | 000000 | 000000 | 00 |
4" | 4.5° | Oval | 180° | Chrome-Plated Steel | __ | Lockable Flex Head | 00000000 | 00000 | 000000 | 00 |
5" | 4° | Oval | 180° | Chrome-Plated Steel | __ | __ | 00000000 | 00000 | 00000000 | 000000 |
6 1/4" | 5° | Round | 180° | Chrome-Plated Steel | __ | __ | 0000000 | 00000 | 000000 | 00 |
6 5/8" | 4° | Oval | 180° | Chrome-Plated Steel | Rubber | __ | 00000000 | 00000 | 00000000 | 00000 |
Sealed Flex-Head Ratchet Wrenches


Sealed with a gasket to keep lubrication in and debris out, these wrenches can be used in dusty environments. The head pivots, so you can access fasteners in tight places. Smaller turns when ratcheting require less clearance to engage the ratchet.
Wrenches with a lockable flex head have a lever that fixes the head in place.
Use repair kits (sold separately) to replace a damaged ratcheting mechanism.
Quick-Release Flex-Head Ratchet Wrenches


No need to pull the socket off the tool—push a button to release. These wrenches also have a head that pivots 180° to reach fasteners in tight spots. Thanks to the ratchet mechanism, you can turn fasteners without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Standard wrenches are built to last. They come from industrial brands, such as Tekton and Gearwrench. Repair kits (sold separately) let you replace a damaged ratcheting mechanism.
Adjustable-Length Quick-Release Flex-Head Ratchet Wrenches


Pivot the head and extend the handle—these wrenches adapt to reach fasteners in challenging spots. When it’s time to release the socket, just push the button on the back of the head. You can turn fasteners without removing and repositioning the wrench, thanks to the ratchet mechanism. The rubber grip makes the handle comfortable to hold.
Overall Lg. | Lg. Adjustment Increments | Turn Required to Ratchet | Head Shape | Flex Range of Motion | Material | Grip Material | Each | |
1/4" Square Drive | ||||||||
---|---|---|---|---|---|---|---|---|
6 3/4"-8 3/4" | 1" | 5° | Oval | 180° | Chrome-Plated Steel | Rubber | 0000000 | 000000 |
Tight-Clearance Ratchet Wrenches


Rather than teeth, these wrenches use a series of rollers to engage the ratchet, enabling work in the tightest of spaces. Also known as silent ratchets, they don't make the traditional clicking sound when turned. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Wrenches with one head can ratchet in both directions, but you’ll need to remove the square drive with pliers and insert it on the opposite side of the head. The square drive is held in place with a retaining ring.
Wrenches with two heads ratchet in both directions—simply flip them around to switch between clockwise and counterclockwise rotation.
Head | ||||||||
---|---|---|---|---|---|---|---|---|
Number of Heads | Overall Lg. | Turn Required to Ratchet | Shape | Ht. | Wd. | Material | Each | |
1/4" Square Drive | ||||||||
1 | 3 1/2" | 0° | Round | 29/32" | 21/32" | Chrome-Plated Steel | 0000000 | 000000 |
1 | 5 1/2" | 0° | Round | 29/32" | 21/32" | Chrome-Plated Steel | 0000000 | 00000 |
1 | 7 1/4" | 0° | Round | 59/64" | 7/8" | Chrome-Plated Steel | 0000000 | 000000 |
2 | 6 1/2" | 0° | Round | 59/64" | 21/32" | Chrome-Plated Steel | 0000000 | 000000 |
Fingertip Ratchet Wrenches



Prevent overtightening fasteners—you’ll feel the resistance from the fastener in your fingers, so you'll know when to stop. Also known as thumbwheel ratchets. You won’t be able to apply as much force as you can with a standard ratchet wrench.
Plastic wrenches are shaped to fit your fingertips for a comfortable grip.
Chrome-plated steel wrenches are knurled to give you a good grip. Since they're all metal, they're built to last.
Swivel-Head Ratchet Wrenches


Position their head anywhere within 180° for more flexibility than flex-head ratchet wrenches. When you’re tight on space and don't need as much torque, pivot the head directly in line with the handle to twist them like a screwdriver. A ratcheting mechanism lets you turn fasteners without removing or repositioning.
Head | ||||||
---|---|---|---|---|---|---|
Overall Lg. | Turn Required to Ratchet | Shape | Range of Motion | Material | Each | |
1/4" Square Drive | ||||||
5 5/8" | 5° | Round | 180° | Chrome-Plated Steel | 0000000 | 000000 |
Crank-Style Speeder Handles

Fasten quickly with these crank-style handles.
Overall Lg. | Material | Each | |
1/4" Square Drive | |||
---|---|---|---|
15 1/2" | Chrome-Plated Steel | 0000000 | 000000 |
Air-Powered Ratchet Wrenches


Faster than manual ratchet wrenches, these ratchet wrenches run on air to turn fasteners quickly. They have a steel head that protects the ratchet mechanism from bumps and drops in the shop. Socket changes are quick—the ball-detent style socket retainer lets you pull one socket off and push another one on. All operate at maximum torque in both clockwise and counterclockwise directions. Air-powered tools require lubrication to run properly.
Wrenches with backlash protection won’t kick back once a fastener is tightened, keeping your knuckles from banging into nearby objects. These wrenches put a lot of force on the socket, so you’ll need to use them with an impact socket (sold separately).
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Features | Each | |
1/4" Square Drive | ||||||||||||
25 | 1 | 250 | 3 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 7 3/8" | 1.4 | __ | 0000000 | 0000000 |
40 | 1 | 600 | 14 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 6 1/8" | 1.3 | Backlash Protection | 00000000 | 000000 |
Sealed-Head Air-Powered Ratchet Wrenches


Built to last, these wrenches have an enclosed steel head that seals lubrication in and dirt, dust, and moisture out to protect the ratchet mechanism. Since they’re air powered, these wrenches turn fasteners more quickly than handheld wrenches. They have a ball-detent-style socket retainer for quick socket changes—pull the socket off the retainer and push on another one. Wrenches operate at full torque in both clockwise and counterclockwise directions. Air-powered tools require lubrication to operate properly.
Air Inlet | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max. Torque, ft.-lbs. | No. of Speeds | Max. No-Load Speed, rpm | Speed Control | Average Air Consumption | Pipe Size | Thread Type | Gender | For Air Hose ID | Overall Lg. | Weight, lbs. | Each | |
1/4" Square Drive | ||||||||||||
40 | Variable | 270 | Lever | 2.8 cfm @ 90 psi | 1/4 | NPT | Female | 3/8" | 8 1/8" | 1.46 | 0000000 | 0000000 |