McMaster-Carr

Search Results

80/20-Compatible Handles About Door Handles Abrasive Blaster Deadman Handles Abrasive Blaster Safety Handles Adjustable Control Handles Adjustable Handles

Telescoping Extension Handles

Aluminum Control Handles Aluminum Extrusion Handles Aluminum Handles Ax Handles Ball Handles Bar Handles Bit Handles Broom Handles Brush Handles

Twisted-Wire Brush Handles

Bubbler Handles Cabinet Handles Cam Handles Casement Crank Handles Clamping Handles

Linkage Handles

Clamp-On Mop Handles Cleaning Tool Handles Coil Handles Control Handles Corbin Russwin Door Handles Crank Handles

Damper Control Handles Hand Wheel Handles Window Operator Handles

Crate Handles Deburring Tool Handles Die Handles Door Handles

Barrier-Free Door Handles Lavatory Partition Door Handles Lavatory Partition Handles Padlockable Handles

Drawer Handles Drinking Fountain Handles Drinking Fountain Nozzle Handles Drop Handles Drum Handles Easy-Grip Handles Edge Handles Extension Handles

Telescoping Extension Handles

Eye Wash Station Handles Faucet Handles File Handles

Rasp Handles

Finger Handles Flag Handles Flow Control Valve Handles Flush-Mount Handles Flush-Valve Handles Folding Pull Handles Food Industry Handles Gear Lever Handles Grab Handles Grip Handles

Bicycle Handles Slide-On Handles

Hammer Handles

Sledge Hammer Handles

Heat-Resistant Handles Hinged Handles Hose Handles Knob Handles Ladder Handles Lever Handles Locker Handles Locking Handles Low-Profile Handles Luggage Handles Machine Handles

Bridgeport-Compatible Milling Machine Handles Instrument Handles Lagun-Compatible Milling Machine Handles Milling Machine Handles Quill-Feed Handles

Metal-Detectable Handles Metric Handles Milling Handles

Bridgeport-Compatible Milling Machine Handles Lagun-Compatible Milling Machine Handles Milling Machine Handles Quill-Feed Handles

Miniature Handles Mop Handles

Dust Mop Handles

Nonsparking Mop Handles Offset Handles Offset Pull Handles Operating Handles Package Handles Paddle Handles Pail Handles Paint Roller Handles Pipe Handles Plastic Cleaning Tool Handles Plastic Control Handles Plastic Handles

Fiberglass Handles Nylon Handles Phenolic Handles

Plug Gauge Handles Pocket Pull Handles Pole Handles Pull Cord Starter Handles Pull Handles

Box Handles Case Handles Chest Handles Coated Pull Handles Folding Handles Lifting Handles Load-Rated Handles Ring Handles

Push Broom Handles Push Handles Push-On Handles Ratchet Crank Handles Ratchet Handles

Ratchet Drive Handles Ratchet Wrench Handles

Ratcheting Deburring Tool Handles Ratcheting Tap Handles Recessed Handles Recessed Pull Handles Revolving Handles Ridgid D-1440 Handles Rubber Handles Safety Handles Sand Blaster Deadman Handles Sand Blaster Safety Handles Sanitary Handles Sargent Door Handles Scalpel Handles Screen Door Handles Screw Handles Shaft Collar Handles Shipping Handles Shovel Handles

Scoop Handles Spade Handles

Shower Handles Sink Handles Sliding Handles Slip-On Mop Handles Socket Spinner Handles Speed Handles Speeder Wrench Handles Spinner Handles Spring Handles Spud Handles Stainless Steel Control Handles Stainless Steel Handles Standard Cam Handles Standard Clamping Handles Standard Pull Handles Standard Tap and Die Wrench Handles Star Handles Steel Cleaning Tool Handles Steel Control Handles Steel Handles Steering Handles Storm Door Handles Strap Handles Stretch Wrap Handles Suction Cup Handles Suitcase Handles Swing Handles Tap Handles Tape Handles Tapered Control Handles Tapered Handles T-Handles Threaded Control Handles Threaded Handles

Acme Threaded Handles

Threading Die Handles Toilet Tank Flush Handles Tool Box Handles Tool Handles

1" Square Drive Handles 1/2" Square Drive Handles 1/4" Square Drive Handles 3/4" Square Drive Handles 3/8" Square Drive Handles Box Wrench Handles Conduit Bender Handles Drive Handles Drive Socket Handles Instrument Handles Pipe Bender Handles Ratchet Drive Handles Socket Wrench Handles Squeegee Handles Tooling Component Handles Wrench Handles

Tooling Component Speeder Handles Torch Handles

Gas Welding Torch Handles Harris 43-2 Oxyacetylene Torch Handles Harris 85 Oxyacetylene Torch Handles TIG Torch Handles Victor 100FC Oxyacetylene Torch Handles Victor 315FC Oxyacetylene Torch Handles Victor 400 Series Oxyacetylene Torch Handles Victor WH411C Oxyacetylene Torch Handles Welding Torch Handles

Tramway Handles Trunk Handles T-Slotted Framing Handles U-Handles Unthreaded Handles Valve Handles Vernier Handles Vise Handles Water Fountain Handles Winch Handles Wing Handles Wire Coil Handles Wire Handles Wood Handles Yale Door Handles

Handle Products

Acme Handle Nuts Antibacterial Handle Covers Ax Handle Protectors Bent-Handle Paint Brushes Broom Handle Braces Broom Handle Converters Broom Handle Tips Copper Handle Covers Door Handle Converters Door Handle Covers Door Handle Exit Devices Door Handle Levers Door Handle Lockouts Door Handle Locks Door Handle Shrouds Drain-Handle Stop Cocks Flag Handle Keys Grip-Handle Test Weights Hammer Handle Protectors Hammer Handle Wedges Handle Bolts Handle Converters Handle Covers Handle Dip Handle Dip Coatings Handle Grip Tape Handle Grip Wrap Handle Grips Handle Hanger Caps Handle Knobs Handle Nuts Handle-Activated Spring-Loaded Latches Handle-Striking Wrenches Heat-Shrink Handle Covers Iron Handle Nuts L-Handle Cam Latches L-Handle Latches L-Handle Torque Wrenches Long-Handle Scrapers Long-Handle Scrub Brushes Machine Handle Cranks Magnets with Handle Metal Handle Screwdrivers Oval-Handle Ball Valves Paddle-Handle Cam Latches Paddle-Handle Latches Pull Handle Rings Ring Handle Pulls Ring-Handle Cam Latches Shoe Handle Brushes Sledge Handle Protectors Straight-Handle Tap Wrenches T-Handle Wrenches Tool Handle Hangers Tool Handle Wedges Valve Handle Lockouts Vise Handle Brackets Vise Handle Hangers Wedge-Handle Ball Valves Wing Handle Keys Wing-Handle Cam Latches

Clear All

	Mount Type Mount Type

Threaded Hole

Threaded Stud

	Material Material

	System of Measurement System of Measurement

Metric

	Thread Size Thread Size	Show

M12

	Thread Size Thread Size	Hide

	Thread Pitch Thread Pitch

1.75 mm

	Handle Length Handle Length

	Stud Length Stud Length

	Color Color

	Black		Orange
	Red		Green
	Blue		Yellow

	Grip Style Grip Style


Ball	Five Arm

Four Arm	Knurled

Seven Arm	Six Arm

Smooth	Three Arm

	Handle/Knob Type Handle/Knob Type

	Stud Material Stud Material

Steel

Stainless Steel

	Finish Finish

	Maximum Temperature Maximum Temperature

150° to 199° F

200° to 249° F

300° F or greater

	Minimum Temperature Minimum Temperature

-50° F or less

-49° to -25° F

-24° to 0° F

	Projection Projection

	Hub Projection Hub Projection

	Head Diameter Head Diameter

	Insert Material Insert Material

Brass

Steel

Stainless Steel

	Thread Depth Thread Depth

	Hub Diameter Hub Diameter

	Thread Direction Thread Direction

Right Hand

	Hub Height Hub Height

	Insert Finish Insert Finish

Black Oxide

Zinc Plated

View catalog pages (21)

Forward

How can we improve?

87 Products

Adjustable Handles

1 (With Threaded Stud)

1 (With Threaded Hole)

2 (With Threaded Stud)

2 (With Threaded Hole)

3 (With Threaded Stud)

3 (With Threaded Hole)

Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

For technical drawings and 3-D models, click on a part number.

Style 1—Threaded Stud

1 (With Threaded Stud)

Threaded-stud handles mount into a threaded hole.

Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.

Zinc handles have good corrosion resistance.

Stainless steel studs are more corrosion resistant than steel studs.

Thread
Size	Pitch, mm	Stud Lg.	Handle Lg.	Projection	Hub Projection	Temp. Range, °F	Choose a Color		Each
Steel Stud
Nylon Plastic
M12	1.75	32mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	000000
M12	1.75	50mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
M12	1.75	63mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
Powder-Coated Zinc
M12	1.75	32mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000
M12	1.75	40mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000
M12	1.75	50mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000
M12	1.75	63mm	108mm	75mm	50mm	__	Black, Orange	00000000	00000
303 Stainless Steel Stud
Nylon Plastic
M12	1.75	32mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
M12	1.75	50mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
M12	1.75	63mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
Powder-Coated Zinc
M12	1.75	32mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000
M12	1.75	40mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000
M12	1.75	50mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000

Style 1—Threaded Hole

1 (With Threaded Hole)

Threaded-hole handles install on a threaded stud.

Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.

Zinc handles have good corrosion resistance.

Stainless steel inserts are more corrosion resistant than black-oxide steel inserts.

Thread
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Temp. Range, °F	Choose a Color		Each
Black-Oxide Steel Insert
Nylon Plastic
M12	1.75	17mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
Powder-Coated Zinc
M12	1.75	17mm	92mm	64mm	43mm	__	Black, Orange	00000000	00000
303 Stainless Steel Insert
Nylon Plastic
M12	1.75	17mm	92mm	65mm	43mm	-20° to 230°	Black, Orange	0000000	00000
Powder-Coated Zinc
M12	1.75	17mm	92mm	64mm	43mm	__	Black, Orange	000000000	00000

Style 2—Threaded Stud

2 (With Threaded Stud)

Threaded-stud handles mount into a threaded hole.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Thread
Size	Pitch, mm	Stud Lg.	Handle Lg.	Projection	Hub Projection	Stud Material		Each
303 Stainless Steel
M12	1.75	30mm	95mm	63mm	43mm	303 Stainless Steel	0000000	000000
M12	1.75	40mm	95mm	63mm	43mm	303 Stainless Steel	0000000	00000
M12	1.75	50mm	95mm	63mm	43mm	303 Stainless Steel	0000000	00000

Style 2—Threaded Hole

2 (With Threaded Hole)

Threaded-hole handles install on a threaded stud.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Thread
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Insert Material		Each
303 Stainless Steel
M12	1.75	17mm	95mm	63mm	43mm	303 Stainless Steel	0000000	000000

Style 3—Threaded Stud

3 (With Threaded Stud)

Threaded-stud handles mount into a threaded hole.

Zinc handles have good corrosion resistance.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Thread
Size	Pitch, mm	Stud Lg.	Handle Lg.	Projection	Hub Projection	Stud Material	Color		Each
Powder-Coated Zinc
M12	1.75	20mm	95mm	67mm	43mm	Steel	Black	0000000	00000
M12	1.75	30mm	95mm	67mm	43mm	Steel	Black	0000000	0000
M12	1.75	40mm	95mm	67mm	43mm	Steel	Black	0000000	00000
M12	1.75	50mm	95mm	67mm	43mm	Steel	Black	0000000	00000
M12	1.75	60mm	95mm	67mm	43mm	Steel	Black	0000000	0000
303 Stainless Steel
M12	1.75	20mm	95mm	67mm	43mm	303 Stainless Steel	__	0000000	00000
M12	1.75	30mm	95mm	67mm	43mm	303 Stainless Steel	__	0000000	00000
M12	1.75	40mm	95mm	67mm	43mm	303 Stainless Steel	__	0000000	00000
M12	1.75	50mm	95mm	67mm	43mm	303 Stainless Steel	__	0000000	00000
M12	1.75	60mm	95mm	67mm	43mm	303 Stainless Steel	__	0000000	00000

Style 3—Threaded Hole

3 (With Threaded Hole)

Threaded-hole handles install on a threaded stud.

Zinc handles have good corrosion resistance.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Thread
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Insert Material	Color		Each
Powder-Coated Zinc
M12	1.75	17mm	95mm	67mm	43mm	Black-Oxide Steel	Black	0000000	00000
303 Stainless Steel
M12	1.75	17mm	95mm	67mm	43mm	303 Stainless Steel	__	0000000	00000

Heavy Duty Adjustable Handles

These rugged steel handles provide lasting durability for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. These handles are also known as clamping handles. All have a black-oxide finish for mild rust resistance.

Threaded-stud handles mount into a threaded hole.

Threaded-hole handles install on a threaded stud.

For technical drawings and 3-D models, click on a part number.

Threaded Stud

With Threaded Stud

Thread						Knob
Size	Pitch, mm	Stud Lg.	Handle Lg.	Projection	Hub Projection	Dia.	Material	Color	Temp. Range, °F		Each
Black-Oxide Steel
M12	1.75	40mm	98mm	97mm	51mm	28mm	Phenolic Plastic	Black	0° to 230°	00000000	000000
M12	1.75	50mm	118mm	109mm	57mm	33mm	Phenolic Plastic	Black	0° to 230°	00000000	00000

Threaded Hole

With Threaded Hole

Thread						Knob
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Dia.	Material	Color	Temp. Range, °F		Each
Black-Oxide Steel
M12	1.75	26mm	98mm	97mm	51mm	24mm	Phenolic Plastic	Black	0° to 230°	00000000	000000

Choose-a-Color Adjustable Handles

With Threaded Stud

With Threaded Hole

Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. Made of plastic, all of these handles resist oil, grease, and solvents.

Threaded-stud handles mount into a threaded hole.

Threaded-hole handles install on a threaded stud.

For technical drawings and 3-D models, click on a part number.

Thread
Size	Pitch, mm	Dp.	Stud Lg.	Handle Lg.	Projection	Hub Projection	Stud Material	Insert Material	Temp. Range, °F	Choose a Color		Each
Threaded Stud
Nylon Plastic
M12	1.75	__	40mm	95mm	61mm	43mm	Steel	__	-40° to 200°	Blue, Green, Red, Yellow	0000000	000000
M12	1.75	__	50mm	95mm	61mm	43mm	Steel	__	-40° to 200°	Blue, Green, Red, Yellow	0000000	00000
Threaded Hole
Nylon Plastic
M12	1.75	17mm	__	95mm	61mm	43mm	__	Black-Oxide Steel	-40° to 200°	Blue, Green, Red, Yellow	0000000	00000

Safety Adjustable Handles

With Threaded Stud

With Threaded Hole

Prevent unintentional changes to equipment settings—when not in use, these handles are disengaged and turn freely. To change the position, push down on the handle and turn. When you release the handle, it disengages once again. These handles are also known as clamping handles. Made of plastic, they all resist oil, grease, and solvents.

Threaded-stud handles mount into a threaded hole.

Threaded-hole handles install on a threaded stud.

For technical drawings and 3-D models, click on a part number.

Thread
Size	Pitch, mm	Dp.	Stud Lg.	Handle Lg.	Projection	Hub Projection	Stud Material	Insert Material	Temp. Range, °F		Each
Threaded Stud
Black Nylon Plastic
M12	1.75	__	30mm	80mm	63mm	46mm	Zinc-Plated Steel	__	-50° to 200°	00000000	000000
M12	1.75	__	40mm	80mm	63mm	46mm	Zinc-Plated Steel	__	-50° to 200°	0000000	00000
Threaded Hole
Black Nylon Plastic
M12	1.75	17mm	__	80mm	63mm	46mm	__	Zinc-Plated Steel	-50° to 200°	0000000	0000

Tapered Lever Handles

1 (Stationary)

1 (Revolving, Plastic)

1 (Revolving, Aluminum)

1 (Revolving/Folding)

3 (Stationary)

Use these handles as grips on hand wheels and cranks to operate machinery.

Threaded-stud handles mount into a threaded hole.

Threaded-hole handles install on a threaded stud.

Revolving handles have a grip that spins freely, making them easy to turn.

Revolving/folding handles have a grip that turns easily and folds down, so it's out of the way when not in use.

Plastic handles are a lightweight alternative to metal. They all resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance.

Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.

For technical drawings and 3-D models, click on a part number.

Style 1—Threaded Stud with Smooth Stationary Handle

1 (Stationary)

Thread				Dia.					Each
Size	Pitch, mm	Stud Lg.	Handle Lg.	(A)	(B)	Stud Material	Temp. Range, °F		1-9	10-Up
Black Phenolic Plastic
M12	1.75	14mm	124mm	33mm	25mm	Steel	230°	0000000	000000	000000

Style 1—Threaded Stud with Smooth Revolving Handle

1 (Revolving, Plastic)

1 (Revolving, Aluminum)

Thread				Dia.					Each
Size	Pitch, mm	Stud Lg.	Handle Lg.	(A)	(B)	Stud Material	Temp. Range, °F		1-9	10-Up
Black Phenolic Plastic
M12	1.75	20mm	102mm	31mm	25mm	Steel	-30° to 325°	0000000	000000	000000
Aluminum
M12	1.75	13mm	72mm	28mm	23mm	Steel	__	00000000	00000	00000
M12	1.75	13mm	82mm	31mm	23mm	Steel	__	00000000	00000	00000

Style 1—Threaded Stud with Smooth Revolving/Folding Handle

1 (Revolving/Folding)

Thread				Dia.					Each
Size	Pitch, mm	Stud Lg.	Handle Lg.	(A)	(B)	Stud Material	Temp. Range, °F		1-9	10-Up
Black Nylon Plastic
M12	1.75	20mm	114mm	28mm	23mm	Steel	-50° to 200°	00000000	000000	000000

Style 3—Threaded Hole with Smooth Stationary Handle

3 (Stationary)

Thread				Dia.				Each
Size	Pitch, mm	Dp.	Handle Lg.	(A)	(B)	Temp. Range, °F		1-9	10-Up
Black Phenolic Plastic
M12	1.75	30mm	65mm	25mm	20mm	0° to 300°	0000000	00000	00000
M12	1.75	40mm	112mm	29mm	22mm	0° to 300°	0000000	0000	0000

Lever Handles

An easy-to-grip ball knob makes these handles a good replacement for gear levers. Use them to operate machinery. They mount into a threaded hole. Made of steel, all of these handles have a black-oxide or zinc-plated finish for mild rust resistance.

Revolving handles have a knob that spins freely, so the handles are easy to turn.

For technical drawings and 3-D models, click on a part number.

Thread					Knob						Each
Size	Pitch, mm	Stud Lg.	Handle Lg.	Dia.	Dia.	Material	Color	Stud Material	Temp. Range, °F		1-9	10-Up
Threaded Stud with Fixed Handle
Black-Oxide Steel
M12	1.75	16mm	254mm	16mm	48mm	Phenolic Plastic	Black	Steel	-70° to 200°	0000000	000000	000000
Threaded Stud with Revolving Handle
Black Zinc-Plated Steel
M12	1.75	21mm	78mm	20mm	50mm	Phenolic Plastic	Black	Steel	0° to 300°	00000000	00000	00000

Ball-Lever Shafts

Attach a ball knob (not included) to one of these shafts to create custom handles for operating machinery. Mount the other end into a threaded hole. These shafts can also be used to create your own gear levers.

Steel shafts have a black-oxide finish for mild rust resistance.

Stainless steel shafts have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

Thread		Stud						Each
Size	Pitch, mm	Lg. 1	Lg. 2	Handle Lg.	Dia.	Stud Material		1-9	10-Up
Threaded Stud
Black-Oxide Steel
M12	1.75	15.9mm	15.9mm	105mm	16mm	Steel	0000000	000000	000000
303 Stainless Steel
M12	1.75	15.9mm	15.9mm	105mm	16mm	303 Stainless Steel	0000000	00000	00000

Heavy Duty Cam Handles

Also known as double cams, these complete cam handles have a durable, extra-large handle for clamping on fixture bases, plates, and workpieces. For fast adjustments, push down on the handle and the head applies pressure to quickly draw two parts together. All of these handles are made of steel with a black-oxide finish for mild rust resistance. Mount them into a threaded hole. Clamping distance is how far the handle will draw parts together when clamped.

For technical drawings and 3-D models, click on a part number.

Thread				Handle
Size	Pitch, mm	Lg.	Clamping Distance	Lg.	Wd.	Center Ht.	Clamped Ht.	Stud Material		Each
Threaded Stud
Black-Oxide Steel
M12	1.75	110mm	2.78mm	127mm	29mm	19mm	33mm	304 Stainless Steel	00000000	000000

Threaded-Stud Knobs

Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Steel knobs are stronger than iron. They have a black-oxide finish for mild rust resistance.

Stainless steel knobs have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Brass knobs have good corrosion resistance and are nonmagnetic.

Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance. Aluminum knobs have mild corrosion resistance, are lightweight, and are nonmagnetic.

For technical drawings and 3-D models, click on a part number.

			Head		Hub						Each
Thread Size	Thread Pitch	Stud Lg.	Dia.	Ht.	Dia.	Ht.	Stud Material	Temperature Range, °F	Specifications Met		1-9	10-Up
Style 1—Knurled Grip
Black-Oxide Steel
M12	1.75mm	44mm	51mm	10mm	25mm	19mm	Steel	__	__	00000000	00000	00000
Brass
M12	1.75mm	44mm	51mm	10mm	25mm	19mm	Stainless Steel	__	__	0000000	00000	00000
Style 14—Four Arm Grip
303 Stainless Steel
M12	1.75mm	40mm	50mm	14mm	18mm	19mm	Stainless Steel	__	__	0000000	00000	00000
M12	1.75mm	50mm	50mm	14mm	18mm	19mm	Stainless Steel	__	__	0000000	00000	00000
Brass
M12	1.75mm	44mm	64mm	14mm	25mm	14mm	Stainless Steel	__	__	0000000	00000	00000
M12	1.75mm	76mm	64mm	14mm	25mm	14mm	Stainless Steel	__	__	0000000	00000	00000
Aluminum
M12	1.75mm	45mm	64mm	15mm	25mm	14mm	Steel	__	__	00000000	00000	00000
M12	1.75mm	76mm	64mm	15mm	25mm	14mm	Steel	__	__	00000000	00000	00000
Style 15—Four Arm Grip
Black Phenolic Plastic
M12	1.75mm	40mm	63mm	17mm	26mm	25mm	Steel	-40° to 165°	__	0000000	0000	0000
Style 18—Seven Arm Grip
Black Nylon Plastic
M12	1.75mm	30mm	63mm	19mm	26mm	21mm	Stainless Steel	-20° to 230°	DIN 6336	0000000	00000	00000
M12	1.75mm	35mm	63mm	19mm	20mm	21mm	Steel	-20° to 230°	DIN 6336	0000000	00000	0000
M12	1.75mm	40mm	63mm	19mm	26mm	21mm	Steel	-40° to 200°	__	00000000	0000	0000
M12	1.75mm	50mm	63mm	19mm	26mm	21mm	Stainless Steel	-20° to 230°	DIN 6336	0000000	00000	00000
M12	1.75mm	60mm	63mm	19mm	20mm	21mm	Steel	-20° to 230°	DIN 6336	0000000	00000	00000
Style 19—Seven Arm Grip
303 Stainless Steel
M12	1.75mm	40mm	50mm	16mm	18mm	17mm	Stainless Steel	__	__	0000000	00000	00000
M12	1.75mm	50mm	50mm	16mm	18mm	17mm	Stainless Steel	__	__	0000000	00000	00000

Threaded-Hole Knobs

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Aluminum knobs have mild corrosion resistance, are lightweight, and are nonmagnetic.

Brass knobs have good corrosion resistance and are nonmagnetic.

Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub					Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F		1-9	10-Up
Style 20—Four Arm Grip
Aluminum
M12	1.75mm	20mm	64mm	14mm	25mm	14mm	__	__	00000000	00000	00000
Brass
M12	1.75mm	14mm	64mm	14mm	25mm	14mm	__	__	0000000	00000	00000
Style 21—Four Arm Grip
Black Phenolic Plastic
M12	1.75mm	22mm	63mm	17mm	26mm	25mm	Zinc-Plated Steel	-40 to 200°	0000000	0000	0000
Style 25—Five Arm Grip
Aluminum
M12	1.75mm	22mm	60mm	20mm	21mm	20mm	__	__	000000000	00000	00000
Style 27—Seven Arm Grip
Black Nylon Plastic
M12	1.75mm	22mm	63mm	19mm	20mm	21mm	Zinc-Plated Steel	-40 to 230°	00000000	0000	0000
M12	1.75mm	23mm	63mm	19mm	26mm	21mm	Zinc-Plated Steel	-40 to 200°	00000000	0000	0000

Choose-a-Color Threaded-Hole Knobs

Identify equipment controls and components at a glance by their color. Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, all resist oil, grease, and solvents.

Style 2 knobs have a colored cap in the center of the head.

For technical drawings and 3-D models, click on a part number.

Style 2—Seven Arm Grip

Thread			Head		Hub							Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F	Specifications Met	Choose a Cap Color		1-9	10-Up
Black Nylon Plastic
M12	1.75mm	18mm	63mm	19mm	26mm	21mm	Stainless Steel	-30° to 200°	DIN 6336	Black, Gray, Red, Yellow	0000000	000000	00000

Comfort-Grip Threaded-Hole Knobs

A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud. Made of plastic, all resist oil, grease, and solvents.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub					Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F		1-9	10-Up
Style 4—Three Arm Grip
Black Rubber-Coated Polypropylene Plastic
M12	1.75mm	13mm	55mm	24mm	21mm	4mm	Zinc-Plated Brass	-15° to 210°	0000000	00000	00000

Threaded Through-Hole Knobs

Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Steel knobs are stronger than iron. Those with a black-oxide finish have mild rust resistance.

Stainless steel knobs have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Nylon has good wear resistance. Phenolic has good scratch resistance.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub					Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F		1-9	10-Up
Style 1—Knurled Grip
303 Stainless Steel
M12	1.75mm	29mm	51mm	10mm	25mm	19mm	__	__	000000000	000000	000000
Steel
M12	1.75mm	29mm	51mm	10mm	25mm	19mm	__	__	000000000	0000	0000
Style 13—Six Arm Grip
Black Phenolic Plastic
M12	1.75mm	18mm	50mm	17mm	24mm	15mm	Brass	0° to 240°	0000000	0000	0000
M12	1.75mm	25mm	60mm	20mm	28mm	15mm	Brass	0° to 240°	0000000	0000	0000
Style 14—Seven Arm Grip
Black Nylon Plastic
M12	1.75mm	22mm	63mm	19mm	26mm	21mm	Zinc-Plated Steel	-40° to 200°	0000000	0000	0000

Threaded-Hole Ball Knobs

Install these traditional, easy-to-grip ball knobs on a threaded stud. They're good for control levers and push-pull rods.

Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance.

For technical drawings and 3-D models, click on a part number.

Thread							Each
Size	Pitch	Dp.	Head Dia.	Insert Material	Temperature Range, °F		1-9	10-Up
Style 1
Black Phenolic Plastic
M12	1.75 mm	18mm	35mm	Brass	-30° to 400°	00000000	00000	00000
M12	1.75 mm	18mm	49mm	Brass	-30° to 400°	00000000	0000	0000
Red Phenolic Plastic
M12	1.75 mm	18mm	35mm	Brass	-30° to 400°	00000000	0000	0000
M12	1.75 mm	18mm	49mm	Brass	-30° to 400°	00000000	0000	0000

Terms and Conditions and Privacy Policy