McMaster-Carr

Search Results

80/20-Compatible Handles About Door Handles Abrasive Blaster Deadman Handles Abrasive Blaster Safety Handles Adjustable Control Handles Adjustable Handles

Telescoping Extension Handles

Aluminum Control Handles Aluminum Extrusion Handles Aluminum Handles Ax Handles Ball Handles Bar Handles Bit Handles Broom Handles Brush Handles

Twisted-Wire Brush Handles

Bubbler Handles Cabinet Handles Cam Handles Casement Crank Handles Clamping Handles

Linkage Handles

Clamp-On Mop Handles Cleaning Tool Handles Coil Handles Control Handles Corbin Russwin Door Handles Crank Handles

Damper Control Handles Hand Wheel Handles Window Operator Handles

Crate Handles Deburring Tool Handles Die Handles Door Handles

Barrier-Free Door Handles Lavatory Partition Door Handles Lavatory Partition Handles Padlockable Handles

Drawer Handles Drinking Fountain Handles Drinking Fountain Nozzle Handles Drop Handles Drum Handles Easy-Grip Handles Edge Handles Extension Handles

Telescoping Extension Handles

Eye Wash Station Handles Faucet Handles File Handles

Rasp Handles

Finger Handles Flag Handles Flow Control Valve Handles Flush-Mount Handles Flush-Valve Handles Folding Pull Handles Food Industry Handles Gear Lever Handles Grab Handles Grip Handles

Bicycle Handles Slide-On Handles

Hammer Handles

Sledge Hammer Handles

Heat-Resistant Handles Hinged Handles Hose Handles Knob Handles Ladder Handles Lever Handles Locker Handles Locking Handles Low-Profile Handles Luggage Handles Machine Handles

Bridgeport-Compatible Milling Machine Handles Instrument Handles Lagun-Compatible Milling Machine Handles Milling Machine Handles Quill-Feed Handles

Metal-Detectable Handles Metric Handles Milling Handles

Bridgeport-Compatible Milling Machine Handles Lagun-Compatible Milling Machine Handles Milling Machine Handles Quill-Feed Handles

Miniature Handles Mop Handles

Dust Mop Handles

Nonsparking Mop Handles Offset Handles Offset Pull Handles Operating Handles Package Handles Paddle Handles Pail Handles Paint Roller Handles Pipe Handles Plastic Cleaning Tool Handles Plastic Control Handles Plastic Handles

Fiberglass Handles Nylon Handles Phenolic Handles

Plug Gauge Handles Pocket Pull Handles Pole Handles Pull Cord Starter Handles Pull Handles

Box Handles Case Handles Chest Handles Coated Pull Handles Folding Handles Lifting Handles Load-Rated Handles Ring Handles

Push Broom Handles Push Handles Push-On Handles Ratchet Crank Handles Ratchet Handles

Ratchet Drive Handles Ratchet Wrench Handles

Ratcheting Deburring Tool Handles Ratcheting Tap Handles Recessed Handles Recessed Pull Handles Revolving Handles Ridgid D-1440 Handles Rubber Handles Safety Handles Sand Blaster Deadman Handles Sand Blaster Safety Handles Sanitary Handles Sargent Door Handles Scalpel Handles Screen Door Handles Screw Handles Shaft Collar Handles Shipping Handles Shovel Handles

Scoop Handles Spade Handles

Shower Handles Sink Handles Sliding Handles Slip-On Mop Handles Socket Spinner Handles Speed Handles Speeder Wrench Handles Spinner Handles Spring Handles Spud Handles Stainless Steel Handles Standard Cam Handles Standard Clamping Handles Standard Pull Handles Standard Tap and Die Wrench Handles Star Handles Steel Cleaning Tool Handles Steel Handles Steering Handles Storm Door Handles Strap Handles Stretch Wrap Handles Suction Cup Handles Suitcase Handles Swing Handles Tap Handles Tape Handles Tapered Control Handles Tapered Handles T-Handles Threaded Control Handles Threaded Handles

Acme Threaded Handles

Threading Die Handles Toilet Tank Flush Handles Tool Box Handles Tool Handles

1" Square Drive Handles 1/2" Square Drive Handles 1/4" Square Drive Handles 3/4" Square Drive Handles 3/8" Square Drive Handles Box Wrench Handles Conduit Bender Handles Drive Handles Drive Socket Handles Instrument Handles Pipe Bender Handles Ratchet Drive Handles Socket Wrench Handles Squeegee Handles Tooling Component Handles Wrench Handles

Tooling Component Speeder Handles Torch Handles

Gas Welding Torch Handles Harris 43-2 Oxyacetylene Torch Handles Harris 85 Oxyacetylene Torch Handles TIG Torch Handles Victor 100FC Oxyacetylene Torch Handles Victor 315FC Oxyacetylene Torch Handles Victor 400 Series Oxyacetylene Torch Handles Victor WH411C Oxyacetylene Torch Handles Welding Torch Handles

Tramway Handles Trunk Handles T-Slotted Framing Handles U-Handles Unthreaded Handles Valve Handles Vernier Handles Vise Handles Water Fountain Handles Winch Handles Wing Handles Wire Coil Handles Wire Handles Wood Handles Yale Door Handles

Handle Products

Acme Handle Nuts Antibacterial Handle Covers Ax Handle Protectors Bent-Handle Paint Brushes Broom Handle Braces Broom Handle Converters Broom Handle Tips Copper Handle Covers Door Handle Converters Door Handle Covers Door Handle Exit Devices Door Handle Levers Door Handle Lockouts Door Handle Locks Door Handle Shrouds Drain-Handle Stop Cocks Flag Handle Keys Grip-Handle Test Weights Hammer Handle Protectors Hammer Handle Wedges Handle Bolts Handle Converters Handle Covers Handle Dip Handle Dip Coatings Handle Grip Tape Handle Grip Wrap Handle Grips Handle Hanger Caps Handle Knobs Handle Nuts Handle-Activated Spring-Loaded Latches Handle-Striking Wrenches Heat-Shrink Handle Covers Iron Handle Nuts L-Handle Cam Latches L-Handle Latches L-Handle Torque Wrenches Long-Handle Scrapers Long-Handle Scrub Brushes Machine Handle Cranks Magnets with Handle Metal Handle Screwdrivers Oval-Handle Ball Valves Paddle-Handle Cam Latches Paddle-Handle Latches Pull Handle Rings Ring Handle Pulls Ring-Handle Cam Latches Shoe Handle Brushes Sledge Handle Protectors Straight-Handle Tap Wrenches T-Handle Wrenches Tool Handle Hangers Tool Handle Wedges Valve Handle Lockouts Vise Handle Brackets Vise Handle Hangers Wedge-Handle Ball Valves Wing Handle Keys Wing-Handle Cam Latches

Clear All

	Mount Type Mount Type

Threaded Hole

Threaded Stud

	Number of Mounting Holes Number of Mounting Holes

	Material Material

	System of Measurement System of Measurement

Metric

	Thread Size Thread Size	Show

	Thread Size Thread Size	Hide

	Thread Pitch Thread Pitch

0.08 mm

0.8 mm

	Mounting Hole Center-to-Center Width Mounting Hole Center- to-Center Width

	Grip Style Grip Style


Four Arm	Knurled

Oval	Ribbed

Round	Seven Arm

Single Arm	Smooth

Three Arm

	Projection Projection

	Grip Diameter Grip Diameter

	Pull Capacity Pull Capacity

	Color Color

	Black		Orange
	Red		Green
	Blue		Yellow

	Stud Length Stud Length

	Width Width

62 mm

138 mm

786mm

	Specifications Met Specifications Met

DIN

FDA Compliant

	Appearance Appearance

Dull

Polished

	Thread Depth Thread Depth

	Handle Length Handle Length

	Stud Material Stud Material

Steel

Stainless Steel

	Maximum Temperature Maximum Temperature

	Handle/Knob Type Handle/Knob Type

Revolving

Stationary

	Head Diameter Head Diameter

	Mounting Screw Material Mounting Screw Material

Steel

Stainless Steel

View catalog pages (22)

Forward

How can we improve?

94 Products

Threaded-Hole Pull Handles

Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Round grips allow your hand to pivot in any direction.

Oval grips conform to your hand and offer more control than round grips.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.

For technical drawings and 3-D models, click on a part number.

				Thread
Mount. Hole Ctr.-to-Ctr. Wd.	Grip Dia.	Projection	Pull Cap., lbs.	Size	Pitch	Dp.	No. of Mount. Holes	Mount. Fasteners Included		Each
Style 1—Round Grip
316 Stainless Steel—Dull
127mm	10mm	40mm	Not Rated	M5	0.8 mm	19mm	2	Yes	0000000	000000
224mm	10mm	40mm	Not Rated	M5	0.8 mm	19mm	2	Yes	0000000	00000
Style 3—Round Grip
303 Stainless Steel—Dull
87mm	11mm	43mm	895	M5	0.8 mm	11mm	2	No	000000	0000
100mm	11mm	43mm	850	M5	0.8 mm	11mm	2	No	0000000	00000
121mm	11mm	43mm	670	M5	0.8 mm	11mm	2	No	0000000	00000
181mm	11mm	43mm	505	M5	0.8 mm	11mm	2	No	0000000	00000
200mm	11mm	43mm	335	M5	0.8 mm	11mm	2	No	0000000	00000
235mm	11mm	43mm	310	M5	0.8 mm	11mm	2	No	0000000	00000

	Grip				Thread
Mount. Hole Ctr.-to-Ctr. Wd.	Ht.	Thick.	Projection	Pull Cap., lbs.	Size	Pitch	Dp.	No. of Mount. Holes	Mount. Fasteners Included	Temp. Range, °F		Each
Style 4—Oval Grip
303 Stainless Steel—Dull
75mm	8mm	14mm	__	Not Rated	M5	0.8 mm	11mm	2	Yes	__	0000000	000000
100mm	8mm	14mm	__	Not Rated	M5	0.8 mm	11mm	2	Yes	__	0000000	00000
125mm	8mm	14mm	__	Not Rated	M5	0.8 mm	11mm	2	Yes	__	0000000	00000
303 Stainless Steel—Polished
75mm	8mm	14mm	__	Not Rated	M5	0.8 mm	11mm	2	Yes	__	0000000	00000
100mm	14mm	8mm	41mm	Not Rated	M5	0.8 mm	11mm	2	Yes	__	00000000	00000
125mm	14mm	8mm	41mm	Not Rated	M5	0.8 mm	11mm	2	Yes	__	00000000	00000
151mm	14mm	8mm	51mm	Not Rated	M5	0.8 mm	11mm	2	Yes	__	00000000	00000
Style 5—Oval Grip
303 Stainless Steel—Dull
113mm	17mm	11mm	37mm	Not Rated	M5	0.8 mm	15mm	2	Yes	__	000000	00000
143mm	17mm	11mm	38mm	Not Rated	M5	0.8 mm	15mm	2	Yes	__	000000	00000
173mm	17mm	11mm	41mm	Not Rated	M5	0.8 mm	15mm	2	Yes	__	000000	00000
213mm	17mm	11mm	43mm	Not Rated	M5	0.8 mm	15mm	2	Yes	__	000000	00000
292mm	17mm	11mm	44mm	Not Rated	M5	0.8 mm	15mm	2	Yes	__	000000	00000
Style 12—Oval Grip
Black Plastic
87mm	13mm	10mm	40mm	Not Rated	M5	0.8 mm	8mm	2	No	-40° to 320°	000000	0000
100mm	13mm	10mm	40mm	Not Rated	M5	0.8 mm	8mm	2	No	-40° to 320°	000000	0000
121mm	13mm	10mm	40mm	Not Rated	M5	0.8 mm	8mm	2	No	-40° to 320°	000000	0000

Food-Grade Threaded-Hole Pull Handles

Suitable for use with food-processing equipment, these handles are made of FDA listed materials. Thread screws through holes from the back of your surface into the handles to install. These handles are stainless steel and have excellent corrosion resistance and good chemical resistance. All have round grips that allow your hand to pivot in any direction.

Pull Handles
				Thread							Replacement Seals
Mount. Hole Ctr.-to-Ctr. Wd., mm	Grip Dia., mm	Wd., mm	Projection, mm	Size	Pitch, mm	No. of Mount. Holes	Mount. Fasteners Included	Specifications Met		Each		Each
Round Grip
316 Stainless Steel
125	12	138	51	M5	0.8	2	No	Made of FDA Listed Materials	0000000	000000	0000000	00000

Extra-Long Threaded-Hole Pull Handles

For applications that require a large gripping area, these handles have a center-to-center distance of 12" or more. Thread screws through holes from the back of your surface into the handles to open and close a variety of doors and drawers on furniture, machines, and equipment.

Round grips allow your hand to pivot in any direction.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

	Grip				Thread
Mount. Hole Ctr.-to-Ctr. Wd.	Dia.	Wd.	Projection	Pull Cap., lbs.	Size	Pitch, mm	Dp.	No. of Mount. Holes	Mount. Fasteners Included		Each
Style 1—Round Grip
316 Stainless Steel—Dull
320mm	10mm	__	40mm	Not Rated	M5	0.8	19mm	2	Yes	0000000	000000
Style 16—Round Grip
304 Stainless Steel—Dull
760mm	15mm	786mm	38mm	Not Rated	M5	0.8	10mm	2	No	00000000	000000

Threaded-Stud Recessed Pull Handles

Insert studs into holes in your surface and fasten with locknuts from the backside to open and close a variety of doors and drawers, including those on furniture, machines, and equipment. This handle fits into a cutout, so it's flush with the mounting surface. Made of stainless steel it has excellent corrosion resistance and good chemical resistance.

For technical drawings and 3-D models, click on a part number.

			For Panel Cutout		Thread
Ht., mm	Wd., mm	Back Projection, mm	Ht., mm	Wd., mm	Size	Pitch, mm	Lg., mm	Mount. Fasteners Included		Each
304 Stainless Steel—Dull
122	62	16	90	40	M5	0.8	10	Yes	000000	00000

Open-Ended Pull Handles

Single Arm with Threaded Hole

Access handles from multiple angles to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Single-arm handles provide a whole-hand grip with a low profile.

Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic. They’re more durable than plastic handles.

Install handles with a threaded or unthreaded hole by threading a screw through a hole from the back of your surface into the handles.

For technical drawings and 3-D models, click on a part number.

Thread		Head						Mounting Screw
Size	Dp.	Ht.	Wd.	Max. Temp., °F	No. of Mount. Holes	Mounting Hole Ctr.-to-Ctr. Ht.	Mount. Fasteners Included	Size	Lg.		Each
Single-Arm Handle—Threaded Hole
Black Anodized Aluminum—Dull
M5	10mm	37mm	125mm	Not Rated	2	14mm	No	M5 M5	25 mm 30 mm	0000000	000000
Aluminum—Dull
M5	10mm	37mm	125mm	Not Rated	2	14mm	No	M5 M5	25 mm 30 mm	0000000	00000

Threaded-Hole Pull Knobs

Thread a screw through a hole from the back of your surface into the knobs to open and close a variety of doors and drawers, including those on furniture, machines, and equipment.

Stainless steel knobs have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub
Size	Pitch, mm	Dp., mm	Dia., mm	Ht., mm	Dia., mm	Ht., mm	Mounting Fasteners Included		Each
Style 4—Smooth Grip
304 Stainless Steel—Dull
M5	0.8	2	38	13	25	14	Yes	00000000	000000
M5	0.8	3	50	14	37	21	Yes	00000000	00000

Sanitary Threaded-Stud Pull Knobs

Thread these sanitary knobs into holes so you can open doors and drawers in hygienic environments. They’re commonly used on furniture and equipment in pharmaceutical and food-processing facilities. Made of Buna-N rubber, the seal keeps out contaminants and blocks unhygienic metal-to-metal contact. It’s FDA compliant for direct contact with food, and blue for easy spotting and removal if it falls into your line. Knobs have a 316 stainless steel body, so they resist corrosion from frequent washdowns with harsh cleaners. Highly polished, with rounded edges and no horizontal ledges, they leave no room for bacteria to grow.

For technical drawings and 3-D models, click on a part number.

Knobs
Thread			Head		Hub						Replacement Seals
Size	Pitch, mm	Stud Lg., mm	Dia., mm	Ht., mm	Dia., mm	Ht., mm	Temp. Range, °F	Specifications Met		Each		Each
Smooth Grip
316 Stainless Steel—Polished
M5	0.8	10	20	5	14	19	-10° to 300°	FDA Compliant 21 CFR 177.2600	00000000	000000	0000000	00000

Sanitary Threaded-Hole Pull Knobs

With a sanitary design, these threaded-hole knobs are often to open and close doors and drawers on furniture, machines, and other equipment in pharmaceutical and food-processing facilities. They attach like most knobs in your kitchen—push a screw through the back of a hole and thread these knobs onto the front. The seal is blue, so it’s easily seen and removed if it falls into your line. It’s also FDA compliant for direct contact with food. Knobs have a 316 stainless steel body that resists corrosion from frequent washdowns with harsh cleaners. They’re highly polished with rounded edges and no horizontal ledges, leaving no room for bacteria to grow.

For technical drawings and 3-D models, click on a part number.

Knobs
Thread			Head		Hub							Replacement Seals
Size	Pitch, mm	Dp., mm	Dia., mm	Ht., mm	Dia., mm	Ht., mm	Temp. Range, °F	Mounting Fasteners Included	Specifications Met		Each		Each
Smooth Grip
316 Stainless Steel—Polished
M5	0.8	7	20	5	14	19	-10° to 300°	No	FDA Compliant 21 CFR 177.2600	00000000	000000	0000000	00000

Adjustable Handles

1 (With Threaded Stud)

1 (With Threaded Hole)

3 (With Threaded Stud)

3 (With Threaded Hole)

Also known as clamping handles, use these standard adjustable handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten.

For technical drawings and 3-D models, click on a part number.

Style 1—Threaded Stud

1 (With Threaded Stud)

Threaded-stud handles mount into a threaded hole.

Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.

Zinc handles have good corrosion resistance.

Stainless steel studs are more corrosion resistant than steel studs.

Thread
Size	Pitch, mm	Stud Lg.	Handle Lg.	Projection	Hub Projection	Temp. Range, °F	Choose a Color		Each
Steel Stud
Nylon Plastic
M5	0.8	16mm	45mm	35mm	25mm	-20° to 230°	Black, Orange	0000000	00000
M5	0.8	32mm	45mm	35mm	25mm	-20° to 230°	Black, Orange	0000000	0000
Powder-Coated Zinc
M5	0.8	15mm	30mm	30mm	25mm	__	Black, Orange	00000000	0000
M5	0.8	20mm	30mm	30mm	25mm	__	Black, Orange	00000000	0000
M5	0.8	20mm	42mm	33mm	24mm	__	Black, Orange	00000000	0000
M5	0.8	25mm	30mm	30mm	25mm	__	Black, Orange	00000000	0000
M5	0.8	40mm	42mm	33mm	24mm	__	Black, Orange	00000000	0000
303 Stainless Steel Stud
Nylon Plastic
M5	0.8	16mm	45mm	35mm	25mm	-20° to 230°	Black, Orange	0000000	0000
M5	0.8	32mm	45mm	35mm	25mm	-20° to 230°	Black, Orange	0000000	0000
Powder-Coated Zinc
M5	0.8	15mm	30mm	30mm	25mm	__	Black, Orange	00000000	00000
M5	0.8	20mm	30mm	30mm	25mm	__	Black, Orange	00000000	00000
M5	0.8	20mm	42mm	33mm	24mm	__	Black, Orange	00000000	00000
M5	0.8	25mm	30mm	30mm	25mm	__	Black, Orange	00000000	00000
M5	0.8	40mm	42mm	33mm	24mm	__	Black, Orange	00000000	00000

Style 1—Threaded Hole

1 (With Threaded Hole)

Threaded-hole handles install on a threaded stud.

Plastic handles are a lightweight alternative to metal. They resist oil, grease, and solvents.

Zinc handles have good corrosion resistance.

Stainless steel inserts are more corrosion resistant than black-oxide steel inserts.

Thread
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Temp. Range, °F	Choose a Color		Each
Black-Oxide Steel Insert
Nylon Plastic
M5	0.8	9mm	45mm	35mm	25mm	-20° to 230°	Black, Orange	0000000	00000
Powder-Coated Zinc
M5	0.8	8mm	42mm	33mm	24mm	__	Black, Orange	00000000	0000
M5	0.8	9mm	30mm	30mm	25mm	__	Black, Orange	00000000	0000
303 Stainless Steel Insert
Nylon Plastic
M5	0.8	9mm	45mm	35mm	25mm	-20° to 230°	Black, Orange	0000000	0000
Powder-Coated Zinc
M5	0.8	8mm	42mm	33mm	24mm	__	Black, Orange	000000000	00000
M5	0.8	9mm	30mm	30mm	25mm	__	Black, Orange	00000000	00000

Style 3—Threaded Stud

3 (With Threaded Stud)

Threaded-stud handles mount into a threaded hole.

Zinc handles have good corrosion resistance.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Thread
Size	Pitch, mm	Stud Lg.	Handle Lg.	Projection	Hub Projection	Stud Material	Color		Each
Powder-Coated Zinc
M5	0.8	15mm	40mm	33mm	24mm	Steel	Black	0000000	00000
303 Stainless Steel
M5	0.8	15mm	40mm	33mm	24mm	303 Stainless Steel	__	0000000	00000

Style 3—Threaded Hole

3 (With Threaded Hole)

Threaded-hole handles install on a threaded stud.

Zinc handles have good corrosion resistance.

Stainless steel handles have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Thread
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Insert Material	Color		Each
Powder-Coated Zinc
M5	0.8	9mm	40mm	33mm	24mm	Black-Oxide Steel	Black	0000000	00000
303 Stainless Steel
M5	0.8	9mm	40mm	33mm	24mm	303 Stainless Steel	__	0000000	00000

Choose-a-Color Adjustable Handles

With Threaded Stud

With Threaded Hole

Identify equipment controls and components at a glance by their color. Also known as clamping handles, use these handles for applications involving frequent positioning, tightening, and holding adjustments. Lift the handle to rotate freely; then release the handle to engage and tighten. Made of plastic, all of these handles resist oil, grease, and solvents.

Threaded-stud handles mount into a threaded hole.

Threaded-hole handles install on a threaded stud.

For technical drawings and 3-D models, click on a part number.

Thread
Size	Pitch, mm	Dp.	Stud Lg.	Handle Lg.	Projection	Hub Projection	Stud Material	Insert Material	Temp. Range, °F	Choose a Color		Each
Threaded Stud
Nylon Plastic
M5	0.8	__	20mm	40mm	30mm	25mm	Steel	__	-40° to 200°	Blue, Green, Red, Yellow	0000000	00000
M5	0.8	__	25mm	40mm	30mm	25mm	Steel	__	-40° to 200°	Blue, Green, Red, Yellow	0000000	0000
Threaded Hole
Nylon Plastic
M5	0.8	9mm	__	40mm	30mm	25mm	__	Black-Oxide Steel	-40° to 200°	Blue, Green, Red, Yellow	0000000	0000

Safety Adjustable Handles

With Threaded Hole

For technical drawings and 3-D models, click on a part number.

Thread
Size	Pitch, mm	Dp.	Handle Lg.	Projection	Hub Projection	Insert Material	Temp. Range, °F		Each
Threaded Hole
Black Nylon Plastic
M5	0.8	9mm	42mm	35mm	27mm	Zinc-Plated Steel	-50° to 200°	00000000	00000
M5	0.8	10mm	44mm	36mm	29mm	Black-Oxide Steel	-40° to 250°	00000000	00000

Tapered Lever Handles

1 (Stationary)

1 (Revolving, Aluminum)

3 (Stationary)

Use these handles as grips on hand wheels and cranks to operate machinery.

Threaded-stud handles mount into a threaded hole.

Threaded-hole handles install on a threaded stud.

Revolving handles have a grip that spins freely, making them easy to turn.

Plastic handles are a lightweight alternative to metal. They all resist oil, grease, and solvents. Phenolic has good scratch resistance.

Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.

For technical drawings and 3-D models, click on a part number.

Style 1—Threaded Stud with Smooth Stationary Handle

1 (Stationary)

Thread				Dia.					Each
Size	Pitch, mm	Stud Lg.	Handle Lg.	(A)	(B)	Stud Material	Temp. Range, °F		1-9	10-Up
Black Phenolic Plastic
M5	0.8	7mm	50mm	15mm	11mm	Steel	230°	0000000	00000	00000

Style 1—Threaded Stud with Smooth Revolving Handle

1 (Revolving, Aluminum)

Thread				Dia.				Each
Size	Pitch, mm	Stud Lg.	Handle Lg.	(A)	(B)	Stud Material		1-9	10-Up
Aluminum
M5	0.8	9mm	28mm	11mm	9mm	Steel	00000000	000000	00000

Style 3—Threaded Hole with Smooth Stationary Handle

3 (Stationary)

Thread				Dia.				Each
Size	Pitch, mm	Dp.	Handle Lg.	(A)	(B)	Temp. Range, °F		1-9	10-Up
Black Phenolic Plastic
M5	0.8	14mm	27mm	13mm	11mm	0° to 300°	0000000	00000	00000

Cam Handles

Use these standard cam handles for most clamping applications. Push down on the handle and the head applies pressure to quickly draw two parts together for fast adjustments. Clamping distance is how far the handle will draw parts together when clamped.

Threaded-hole handles install on a threaded stud.

Threaded-stud handles mount into a threaded hole.

Aluminum handles have mild corrosion resistance, are lightweight, and are nonmagnetic.

For technical drawings and 3-D models, click on a part number.

Threaded Hole

With Threaded Hole

Thread			Handle
Size	Pitch, mm	Clamping Distance	Lg.	Wd.	Center Ht.	Clamped Ht.	Max. Clamping Force, lbs.	Washer Material	Thrust Washer Material		Each
Black Powder-Coated Aluminum
M5	0.8	1.2mm	70mm	15mm	15mm	22mm	875	Steel	Plastic	0000000	000000

Threaded Stud

With Threaded Stud

Thread				Handle
Size	Pitch, mm	Lg.	Clamping Distance	Lg.	Wd.	Center Ht.	Clamped Ht.	Max. Clamping Force, lbs.	Stud Material	Washer Material	Thrust Washer Material		Each
Black Powder-Coated Aluminum
M5	0.8	20mm	1.19mm	70mm	15mm	15mm	22mm	875	Steel	Steel	Plastic	0000000	000000
M5	0.8	30mm	1.19mm	70mm	15mm	15mm	22mm	875	Steel	Steel	Plastic	00000000	00000
M5	0.8	40mm	1.19mm	70mm	15mm	15mm	22mm	875	Steel	Steel	Plastic	00000000	00000
M5	0.8	50mm	1.19mm	70mm	15mm	15mm	22mm	875	Steel	Steel	Plastic	00000000	00000

Threaded-Stud Knobs

Mount these knobs into a threaded hole. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Steel knobs are stronger than iron. They have a black-oxide finish for mild rust resistance.

Stainless steel knobs have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Brass knobs have good corrosion resistance and are nonmagnetic.

Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance.

For technical drawings and 3-D models, click on a part number.

			Head		Hub						Each
Thread Size	Thread Pitch	Stud Lg.	Dia.	Ht.	Dia.	Ht.	Stud Material	Temperature Range, °F	Specifications Met		1-9	10-Up
Style 1—Knurled Grip
Black-Oxide Steel
M5	0.8mm	25mm	19mm	6mm	13mm	10mm	Steel	__	__	00000000	00000	00000
303 Stainless Steel
M5	0.8mm	25mm	19mm	6mm	13mm	10mm	Stainless Steel	__	__	00000000	0000	0000
Brass
M5	0.8mm	25mm	19mm	6mm	13mm	10mm	Stainless Steel	__	__	0000000	0000	0000
Style 6—Ribbed Grip
Black Nylon Plastic
M5	0.8mm	16mm	20mm	10mm	12mm	6mm	Steel	-20° to 270°	__	00000000	0000	0000
Style 15—Four Arm Grip
Black Phenolic Plastic
M5	0.8mm	15mm	25mm	8mm	11mm	9mm	Steel	-40° to 165°	__	0000000	0000	0000
Black Nylon Plastic
M5	0.8mm	20mm	32mm	22mm	13mm	__	Steel	-20° to 250°	__	00000000	0000	0000
Style 18—Seven Arm Grip
Black Nylon Plastic
M5	0.8mm	15mm	25mm	8mm	12mm	8mm	Stainless Steel	-20° to 230°	DIN 6336	0000000	0000	0000
M5	0.8mm	25mm	25mm	8mm	12mm	8mm	Stainless Steel	-20° to 230°	DIN 6336	0000000	0000	0000
M5	0.8mm	25mm	25mm	8mm	12mm	8mm	Steel	-40° to 200°	__	00000000	0000	0000

Tethered Threaded-Stud Knobs

Never lose these knobs—tether them to equipment to keep them where you need them. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, all of these knobs resist oil, grease, and solvents. Mount them into a threaded hole.

Thread			Head		Hub								Each
Size	Pitch, mm	Stud Length	Dia.	Ht, mm	Dia.	Ht. , mm	Lanyard Lg., mm	Eye Dia., mm	Stud Material	Temperature Range, °F	Specifications Met		1-9	10-Up
Seven Arm Grip
Black Nylon Plastic
M5	0.08	10 mm	25	8	12	8	200	5	Stainless Steel	-40° to 190°	DIN 6336	0000000	000000	000000

Threaded-Hole Knobs

Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Steel knobs have a black-oxide finish for mild rust resistance.

Stainless steel knobs have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

Brass knobs have good corrosion resistance and are nonmagnetic.

Plastic knobs are a lightweight alternative to metal. They resist oil, grease, and solvents. Phenolic has good scratch resistance. Nylon has good wear resistance.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub					Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F		1-9	10-Up
Style 1—Knurled Grip
Black-Oxide Steel
M5	0.8mm	10mm	19mm	6mm	13mm	10mm	__	__	000000000	00000	00000
303 Stainless Steel
M5	0.8mm	10mm	19mm	6mm	13mm	10mm	__	__	000000000	0000	0000
Brass
M5	0.8mm	10mm	19mm	6mm	13mm	10mm	__	__	0000000	0000	0000
Style 2—Knurled Grip
Black Phenolic Plastic
M5	0.8mm	10mm	19mm	13mm	13mm	__	__	-20 to 380°	0000000	0000	0000
Style 8—Ribbed Grip
Black Nylon Plastic
M5	0.8mm	5mm	20mm	10mm	12mm	6mm	Brass	-20 to 270°	00000000	0000	0000
Style 21—Four Arm Grip
Black Phenolic Plastic
M5	0.8mm	11mm	25mm	8mm	11mm	9mm	Zinc-Plated Steel	-40 to 200°	0000000	0000	0000
Style 27—Seven Arm Grip
Black Nylon Plastic
M5	0.8mm	9mm	25mm	8mm	12mm	8mm	Zinc-Plated Steel	-40 to 200°	00000000	0000	0000

Choose-a-Color Threaded-Hole Knobs

Identify equipment controls and components at a glance by their color. Install these knobs on a threaded stud. They provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery. Made of plastic, all resist oil, grease, and solvents.

Style 2 knobs have a colored cap in the center of the head.

For technical drawings and 3-D models, click on a part number.

Style 2—Seven Arm Grip

Thread			Head		Hub							Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F	Specifications Met	Choose a Cap Color		1-9	10-Up
Black Nylon Plastic
M5	0.8mm	10mm	25mm	8mm	12mm	8mm	Stainless Steel	-30° to 200°	DIN 6336	Black, Gray, Red, Yellow	0000000	00000	00000

Comfort-Grip Threaded-Hole Knobs

A rubber coating provides a comfortable grip to position, tighten, and hold fixtures, equipment, and machinery. Install these knobs on a threaded stud. Made of plastic, all resist oil, grease, and solvents.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub					Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.	Insert Material	Temperature Range, °F		1-9	10-Up
Style 4—Three Arm Grip
Black Rubber-Coated Polypropylene Plastic
M5	0.8mm	13mm	30mm	13mm	13mm	4mm	Zinc-Plated Brass	-15° to 210°	0000000	00000	00000

Metal-Detectable Threaded-Hole Knobs

Ribbed Grip

Position, tighten, and hold fixtures, equipment, and machinery near food processing lines without the risk of contaminating the food. These knobs contain metal additives that will set off metal detectors if they—or any piece of them—fall into your line. They’re also bright blue, making them easy to spot. Use these knobs to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs for food safety. All are FDA compliant for direct contact with food.

Made of nylon, these knobs resist wear and repel oil, grease, and solvents. Install them on a threaded stud.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub
Size	Pitch, mm	Depth, mm	Diameter, mm	Height, mm	Diameter, mm	Height, mm	Insert Material	Temperature Range, °F	Specifications Met		Each
Ribbed Grip
Blue Nylon Plastic
M5	0.8	10	21	7.5	12.5	10.5	303 Stainless Steel	-30° to 130°	FDA Compliant 21 CFR 177.1500, FDA Compliant 21 CFR 178.3297	00000000	00000

Threaded Through-Hole Knobs

Long shafts can thread through these knobs for mounting versatility. The knobs provide a secure grip to position, tighten, and hold fixtures, equipment, and machinery.

Steel knobs are stronger than iron. Those with a black-oxide finish have mild rust resistance.

Stainless steel knobs have excellent corrosion resistance, making them the best choice for harsh environments. They also have good chemical resistance.

For technical drawings and 3-D models, click on a part number.

Thread			Head		Hub			Each
Size	Pitch	Dp.	Dia.	Ht.	Dia.	Ht.		1-9	10-Up
Style 1—Knurled Grip
303 Stainless Steel
M5	0.8mm	16mm	19mm	6mm	13mm	10mm	000000000	00000	00000
Steel
M5	0.8mm	16mm	19mm	6mm	13mm	10mm	000000000	0000	0000

Terms and Conditions and Privacy Policy