For Use With For Use With |
---|
|
|
Tooth Material Tooth Material |
---|
|
Body Material Body Material |
---|
|
Maximum Cutting Width @ Angle Maximum CuttingWidth @ Angle |
---|
|
Safety Properties Safety Properties |
---|
|
Also known as bimetal blades, these have a steel body with high-speed steel teeth. They last twice as long as other hacksaw blades. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Teeth per Inch | Tooth | Body | Cut Type | For Use On | Pkg. Qty. | Pkg. | |
10" Lg. | |||||||||
1/2" | 0.025" | 18 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
1/2" | 0.025" | 24 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 0000 |
1/2" | 0.025" | 32 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 0000 |
12" Lg. | |||||||||
1/2" | 0.025" | 14 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 0000 |
1/2" | 0.025" | 18 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 0000 |
1/2" | 0.025" | 24 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 0000 |
1/2" | 0.025" | 32 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 0000 |
This progressive-tooth blade has small, fine teeth that gradually increase to large teeth for fast cuts. Also known as a bimetal blade, it has a steel body with high-speed steel teeth and lasts twice as long as other hacksaw blades.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Teeth per Inch | Tooth | Body | Cut Type | For Use On | Pkg. Qty. | Pkg. | |
12" Lg. | |||||||||
1/2" | 0.025" | 18-32 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
Teeth are ground into a forward angle for 30% more cutting power than long-life blades. Also known as bimetal blades, they have a steel body with high-speed steel teeth and last twice as long as standard blades. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Teeth per Inch | Tooth | Body | Cut Type | For Use On | Pkg. Qty. | Pkg. | |
10" Lg. | |||||||||
1/2" | 0.025" | 18 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 000000 |
1/2" | 0.025" | 24 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
1/2" | 0.025" | 32 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
12" Lg. | |||||||||
1/2" | 0.025" | 18 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
1/2" | 0.025" | 24 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
1/2" | 0.025" | 32 | High-Speed Steel | Steel | Straight | Metal, Plastic, Wood | 5 | 0000000 | 00000 |
Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Carbon steel blades are an economical option for cutting soft materials such as mild steel, copper, plastic, and wood. High-speed steel blades have hardened teeth, so they cut harder metal and plastic than carbon steel blades.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Teeth per Inch | Tooth | Body | Cut Type | For Use On | Pkg. Qty. | Pkg. | |
10" Lg. | |||||||||
1/2" | 0.026" | 18 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 2 | 0000000 | 00000 |
1/2" | 0.026" | 24 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 2 | 0000000 | 0000 |
1/2" | 0.026" | 32 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 2 | 0000000 | 0000 |
12" Lg. | |||||||||
1/2" | 0.025" | 14 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 10 | 000000 | 0000 |
1/2" | 0.025" | 18 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 10 | 000000 | 0000 |
1/2" | 0.025" | 18 | High-Speed Steel | High-Speed Steel | Straight | Metal, Plastic, Wood | 10 | 0000000 | 00000 |
1/2" | 0.025" | 24 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 10 | 000000 | 0000 |
1/2" | 0.025" | 24 | High-Speed Steel | High-Speed Steel | Straight | Metal, Plastic, Wood | 10 | 0000000 | 00000 |
1/2" | 0.025" | 32 | Carbon Steel | Carbon Steel | Straight | Metal, Plastic, Wood | 10 | 000000 | 0000 |
1/2" | 0.025" | 32 | High-Speed Steel | High-Speed Steel | Straight | Metal, Plastic, Wood | 10 | 0000000 | 00000 |
Carbide grit bonded to a steel blade cuts through abrasive materials such as ceramics and masonry as well as hardened steel, cable, and chain.
Also known as rodsaw blades, these cut in any direction, so they're a good choice for contoured cuts. They have carbide grit bonded to a steel blade to cut through abrasive materials such as ceramics and masonry as well as hardened steel.
Made of beryllium copper that is FM approved, these blades satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Warning: Do not use these tools in direct contact with acetylene.
Material | ||||||||
---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Teeth per Inch | Tooth | Body | Cut Type | For Use On | Each | |
11 3/4" Lg. | ||||||||
1/2" | 0.0313" | 18 | Beryllium Copper | Beryllium Copper | Straight | Metal, Plastic | 0000000 | 000000 |
The teeth on these blades are designed to cut more quickly than other scroll saw blades. Choose more teeth per inch for a smooth cut; choose fewer teeth per inch for fast, rough cutting.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Lg. | Teeth per Inch | For Material Thick. | Tooth | Body | For Use On | Pkg. Qty. | Pkg. | |
0.25" | 0.028" | 5" | 7 | 1/4"-3/4" | Steel | Steel | Plastic, Wood | 12 | 00000000 | 00000 |
This blade has teeth that are designed to cut more quickly than the teeth on standard scroll saw blades for wood.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Wd. | Thick. | Lg. | Teeth per Inch | For Material Thick. | Tooth | Body | For Use On | Pkg. Qty. | Pkg. | |
0.1" | 0.022" | 5" | 9 | 3/32"-1/4" | Steel | Steel | Wood | 12 | 00000000 | 00000 |
Fold the blade into the handle like a jackknife. These saws accept reciprocating saw blades.
11 1/8" length folds to 6 1/2" long.
13 3/4" length folds to 8" long.
Saws | Replacement Blades | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For Blade Lg. | Overall Lg. | Folded Lg. | Handle Material | Blade Replaceable | Includes | Each | Pkg. Qty. | Pkg. | ||
6" | 11 1/8" | 6 1/2" | Plastic | Yes | One 6" Lg. Steel Blade with Carbon Steel Teeth for Plastic, Wood, and Wood with Nails (18 Teeth per inch) | 0000000 | 000000 | 5 | 0000000 | 000000 |
6" | 13 1/4" | 8" | Plastic | Yes | One 6” Lg. Steel Blade for Wood (9 Teeth per Inch) | 0000000 | 00000 | 5 | 0000000 | 00000 |
A reinforced back keeps the blade straight for better control and more precise cuts. These saws are also known as backsaws.
Style A is also known as a razor saw and has a replaceable, ultra-thin blade with fine teeth for cutting delicate parts. The blade can be reversed to make pull cuts.
Make quick cuts with blades that cut on both forward and backward strokes. Also known as bow saws.
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
For Blade Lg. | Overall Lg. | Throat Dp. | Frame | Handle | Blade Replaceable | Includes | Features | Each | |
12" | 16" | 6" | Steel | Steel | Yes | One 12” Lg. Steel Blade for Wood (5 Teeth per Inch); One 12" Lg. High-Speed Steel Blade for Metal and Plastic (24 Teeth per Inch) | Knuckle Guard | 000000 | 000000 |
30" | 34 13/16" | 7" | Steel | Plastic | Yes | One 30” Lg. Steel Blade for Wood (4 Teeth per Inch) | Knuckle Guard | 000000 | 00000 |
The thin blade flexes to make flush cuts. This saw has an edge with 18 teeth per inch for rough cuts and a gradated edge for finer cuts.
This large-throat-depth saw makes deeper intricate cuts than standard hacksaws for tight curves.
Designed with a small frame and tapered nose, this saw makes cuts in tighter spots than standard hacksaws.
A blade made of carbon steel cuts plastic pipe, plasterboard, and plywood.
Saws | Replacement Blades | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Blade Lg. | Overall Lg. | Handle Material | Blade Replaceable | Blade Included | Includes | Features | Each | Pkg. Qty. | Pkg. | ||
12" | 16" | Aluminum | Yes | Yes | One 12” Lg. Carbon Steel Blade for Plastic and Wood (10 Teeth per Inch) | Level | 0000000 | 000000 | 1 | 0000000 | 000000 |
18" | 22" | Aluminum | Yes | Yes | One 18” Lg. Carbon Steel Blade for Plastic and Wood (10 Teeth per Inch) | Level | 0000000 | 00000 | 1 | 0000000 | 00000 |
Use this saw to cut precise angles by hand. Also known as a miter box saw. It has an adjustable cutting depth. Cutting angles listed are for both left- and right-hand cuts.
Overall | Base Table | Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Lg. | Ht. | Wd. | Lg. | Max. Cutting Ht. | Cutting Angle | Max. Cutting Wd. @ Angle | Frame | Grip | Handle | Includes | Each | |
28" | 10 3/4" | 4" | 14 1/2" | 4 1/2" | 45°, 54°, 60°, 67.5°, 75°, 90° | 4 1/16" @ 45°, 6 1/2" @ 90° | Cast Zinc | Rubber | Plastic | One 22" Lg. × 1 1/2" Wd. Steel Blade for Wood (14 Teeth per Inch) | 0000000 | 000000 |
Replacement Blade | 0000000 | Each | 000000 |