Attach these general purpose hooks to steel walls, cabinets, and other magnetic surfaces.

Adhesive strips hold tight yet remove cleanly without damaging the wall.

The anchor flares out to grip the wall and keep the hook securely mounted.

Racks have multiple holders to organize items.

Store tools such as brooms, screwdrivers, and flashlights with these holders that attach to magnetic surfaces.

Organize bottles of various shapes and sizes.

Slide caps onto the end of hooks to protect items from scratches.

Made of hardboard or plastic, these pegboards are an economical alternative to framed pegboards.

Attach the lid to pegboard and then unscrew the jar to grab small parts.

Use these bins to hold small parts.

Attach to the top of an item to hang it on a hook.

These plastic hangers prevent corrosion caused by metal-to-metal contact. Push them closed for a more secure hold on material than loop hangers.

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Secure two pressurized hydraulic lines with a single clamp to lessen vibration in hydraulic systems. Weld the bottom plate onto the mounting surface for a more secure connection than rail- and adhesive-mount clamps.

For use with a single line, these clamps mount directly onto rails, no adhesive or welding required. They fit tightly around pressurized lines in hydraulic systems to lessen vibration.

For use with a single line, these plastic clamps reduce wear on softer materials, such as tubing and cable, and prevent corrosion caused by metal-to-metal contact.

Flexible grooves inside these polypropylene clamps allow material to expand and contract. Clamps are moisture and chemical resistant.

Route two lines of tubing with a single clamp. Commonly used in compressed air systems, these polypropylene clamps withstand moisture and most chemicals. They have a folding arm that closes to secure material.

Quickly mount parallel lines of pipe, hose, or tubing by clicking them into these clamps. Made of acetal, they are UV-resistant and can be used outdoors.

Backed with foam adhesive tape, these clamps mount to any smooth surface—no fasteners required. They are noncorrosive, nonconductive nylon.

Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.

Attach these supports onto metal stud knockouts to route cable, conduit, and tubing through metal studs.

Add push-in cable holder to this adapter to mount cable to DIN rail.

Keep individual wires separate by laying them between the coils on these holders.

Secure multiple cable bundles with a single holder.

These cable ties come with a material certificate with traceable lot number and product shelf life.

Whether you plan to change the bundle size or need a temporary hold, these ties have a release tab for removal and reuse.

Use the built-in blade to remove excess length once these ties are secure.

For use in environments subjected to chemicals, these ties withstand the most corrosive conditions.

These cable ties have a finely ribbed body and a metal-toothed head that allows them to adjust to the exact size of the material without slipping.

The head of these cable ties is contoured to fit against pipe, tubing, and other round material for a tight fit.

Often used as tamper seals and in tagging applications, these ties create a consistent loop size every time.

Protect sensitive electronic equipment from static buildup.

Pull the tab to tear off these cable ties.

The rounded, low-profile head keeps these ties from snagging and allows them to fit in tight spaces.

A foam padded back combined with an extra-wide body protects sensitive bundles, such as fiber optic cable.

Reduce gaps between the cable tie and bundle—these ties have a smooth body that allows them to adjust to the exact size of the material.

These ties are less likely to crack and break from dryness than regular cable ties.

Identify bundles at a glance.

Secure and separate two bundles with the same tie.

Made from nylon 6/6, these threaded rods resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.

These metric threaded rods are made from nylon 6/6 and resist oil, grease, and solvents. They’re nonconductive, making them good for use around sensitive electrical components.

Use four brackets to support the top and bottom edges of panels without drilling holes in them.

Use these components to design your own frame to support ceiling tiles.

Secure ceiling tiles or join ceiling tile frame components.

Extend keys from the holder when needed and a cable automatically retracts them when you're done.

These grips are grooved to conform to your fingers for a comfortable, secure grasp. Slide them onto a round tool handle and use the eye to hang them. All are made of vinyl for strength and durability.

Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.

Control access to fire extinguishers and guard against theft and vandalism.

Reels are enclosed to protect your hose when it's not in use.

These curtains have metal grommets for durability.

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Use these accessories to mount carriers to your machinery without creating an obstruction.

Thread cable and hose through the entire length.

Bending and twisting up to 380° in any direction, these carriers organize and protect cable and hose around machines that are constantly moving, such as robotic arms and conveyors.

Slide these clips on DIN rails—often used in equipment cabinet racks—to route and organize cables. Since these clips don’t require adhesive or screws, you can move them anywhere along the rail.

Lock wrenches into these racks before taking them with you. Snap tools into the slots and twist one wrench to lock or unlock the whole set.

Mount to walls, cabinets, and other steel surfaces.

Organize your tool drawer by positioning these low-profile rails to accommodate wrenches of any length.

Store sockets on posts marked with the size.

A flexible design allows these lights to be suspended above, wrapped around, or routed through areas on the job site.

A movable head lets you aim light where it’s needed most in areas that don't have electrical power service.

Bring light to areas that don't have electrical power service.

Mount frameless mirrors to the wall.