Steel Hangers | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

	Fastener Strength Grade/Class Fastener Strength Grade/Class

ASTM Grade B7

	Height Height

7,051 Products

Hooks

Heavy Duty Hooks

Hang larger, heavier items than standard hooks with these load-rated hooks.

Hooks

These hooks are often used to hang coats and other lightweight items.

Hook Racks

Racks have multiple hooks to hang items

Heavy Duty Hook Racks

With a welded construction, these racks hold heavier items than standard hook racks, such as chains, ladders, and heavy tools.

Magnet-Mount Hooks

Attach these general purpose hooks to steel walls, cabinets, and other magnetic surfaces.

Under-Mount Hooks

Use screws to mount these hooks to the ceiling or under a surface, such as a bench top.

Over-the-Door Hooks

Place over doors and panels to add storage space without creating holes.

Screw-In Hooks

Threads on one end make it easy to screw these hooks directly into a wall.

Reusable Adhesive-Back Hooks

Adhesive strips hold tight yet remove cleanly without damaging the wall.

Vacuum Hooks

Stick the suction cup to a smooth, nonporous surface to temporarily hang lightweight items.

Nail-In Hooks

Quickly mount these hooks with a few strikes of a hammer.

Holders

Store tools such as brooms, cordless drills, screwdrivers, and flashlights.

Holder Racks

Racks have multiple holders to organize items.

Magnet-Mount Holders

Store tools such as brooms, screwdrivers, and flashlights with these holders that attach to magnetic surfaces.

Magnet-Mount Holder Racks

Organize small parts and hand tools with these racks, which attach to steel walls, cabinets, and other magnetic surfaces.

Screw-In Holders

With threads on one end, holders can easily be screwed into a wall.

Bottle Holders

Organize bottles of various shapes and sizes.

Angle Grinder Holders

Hold an angle grinder with a wheel diameter up to 6".

Wipe Box Holders

With a hole in the bottom for convenient dispensing, these holders can accommodate boxes of wipes or rags.

Stretch Wrap Holders

Store stretch wrap and hand-held stretch wrap dispensers.

Pegboards

Pegboard Hooks

Hang wrenches, handsaws, levels, and other tools on these hooks.

Pegboard Holders

Store tools such as pliers, screwdrivers, and hammers.

Pegboard Assortments

Assortments include enough pieces to set up an entire pegboard.

Stay-Put Pegboard Holders

A locking tab and mounting screw secure holders on hardboard pegboard to store tools such as pliers, screwdrivers, and hammers.

Stay-Put Pegboard Hooks

A locking tab and mounting screw secure hooks on hardboard pegboard to hang wrenches, handsaws, levels, and other tools.

Stay-Put Pegboard Assortments

Assortments include hooks, holders, and bin boxes to organize tools on a pegboard. A locking tab and mounting screw secure each piece on hardboard pegboard.

Pegboard Bottle Holders

Organize bottles, cans, and jugs with these holders.

Pegboard Hook Retainer Clips

Keep pegboard hooks and holders from falling out when removing tools.

Pegboard Strips

Often used to store long tools such as shovels, these all-metal strips hold up to 1,000 lbs.

Heavy Duty Pegboards

With capacities up to 2,000 lbs., these all-metal pegboards are stronger and more durable than hardboard and plastic pegboards.

Pegboard Trays

Keep small tools and parts in these trays for easy access.

Pegboard Baskets

Store tools large and small while keeping them visible.

Pegboard Bin-Box Clips

Screw the clip into hardboard pegboard, then add any hangable bin box.

Pegboard Bulldog Clips

Hold instructions, safety sheets, and small bags with these clips.

Pegboard Shelf Brackets

Pair these brackets with any shelf.

Slatwall

Slatwall Holders

Store tools such as shovels and screwdrivers for convenient access.

Slatwall Hooks

Hang items such as wrenches, hammers, and extension cords.

Slatwall Magnetic Holders

These holders keep steel tools in place magnetically.

Slatwall Shelf Brackets

Pair these brackets with any shelf.

Slatwall Baskets

Hold large and small tools while keeping them visible.

Slatwall Shelves

Store tote boxes, buckets, and other large items on these shelves.

Coat Hangers

Hang coats and other garments on a rack with these open-hook or closed-loop hangers.

Hangers for Suspended Ceilings

Slide hangers onto ceiling tile framing to suspend signs, cords, and cable.

Picture Hanging Brackets

Brackets come with nails to mount to the back of a wood frame.

Magnetic Holders

These holders keep steel tools and knives in place magentically.

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Also known as conduit hangers, these hangers load from the bottom so you can add or remove material without removing the mounted hanger.

Stackable Threaded-Rod-Mount Clamping Hangers

Mount these hangers on top of one another to organize multiple lines of pipe, tubing, and conduit at any angle.

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Rubber cushions fit material tightly to reduce vibration and provide a more secure hold than loop hangers. The cushions also protect material from sharp edges and prevent corrosion caused by metal-to-metal contact.

Pivoting Threaded-Rod-Mount Loop Hangers

Also known as clevis hangers, these have a pivoting loop that adjusts for line movement and vibration. Combine with a threaded rod or other fastener to hang from the ceiling.

Swivel Threaded-Rod-Mount Loop Hangers

These hangers have a swivel nut for adjusting direction after mounting. They're also known as teardrop hangers. Combine with a threaded rod or other fastener to hang from the ceiling.

Side-Load Threaded-Rod-Mount Loop Hangers

Access material quickly without uninstalling the mounted hanger. These hangers have a removable bolt for loading pipe, tube, and conduit from the side. Combine them with a threaded rod or other fastener to hang from the ceiling.

Threaded-Rod-Mount Roller Loop Hangers

A roller on the bottom of these hangers compensates for movement due to expansion and contraction, such as in hydraulic applications. Combine with a threaded rod or other fastener to hang from the ceiling.

Pipe Cradles for Loop Hangers

Also known as pipe shields, these cradles provide additional support and prevent insulation from tearing when routing insulated pipe through loop hangers.

Threaded-Rod-Mount Multiline Hangers

Route multiple lines of pipe, tubing, and conduit with a single hanger. A wide opening and locking tab allow access for installation, adjustment, and removal.

Weld-Mount Clamping Hangers

For a strong, secure connection, mount these hangers by welding them to a rod.

Strap Hangers

Cut as much strap as you need to hang duct, pipe, and other materials.

Strap-Mount Clamping Hangers

Use these close-fitting hangers for a more rigid hold around material than when using straps alone.

Clamping Hangers

Reduce movement in your line with hangers that are more rigid than strap hangers and fit tighter around pipe, conduit, and tube than loop hangers.

Suspension Beams for Threaded Rod

Mount these beams across parallel roof joists to hang threaded rod and route pipe, duct, and other overhead systems in areas where there’s no anchoring point.

Routing Clamps

Strut-Mount Metal Routing Clamps

Route pipe, tubing, and conduit across strut channel.

Low-Profile Strut-Mount Metal Routing Clamps

For areas with low clearance, these clamps have the mounting fastener to the side of the material, rather than on top.

Standoff Strut-Mount Metal Routing Clamps

Hold pipe, tubing, and conduit away from strut channel.

Strut-Mount Metal Routing Clamps for Insulated Pipe

Secure insulated pipe to strut channel without pinching the insulation or exposing the pipe. These clamps are sized for use with insulated pipe and have a plastic insert that creates a seal around the insulation to prevent the pipe from sweating, which can cause mold and corrosion.

Narrow-Space Strut-Mount Metal Routing Clamps

Even when these clamps are installed side by side, the clamping screws remain accessible. Use them to route pipe, tubing, and conduit across strut channel.

Routing Clamps

For use with a single line, these clamps brace pipe, tubing, and conduit directly against the mounting surface.

Two-Line Routing Clamps

Mount parallel lines of pipe, tubing, or conduit directly against the mounting surface.

Strut-Mount Vibration-Damping Routing Clamps

Slide multiple clamps into existing strut channel to organize lines of pipe, tubing, and conduit without the need for drilling, welding, or using adhesive. Clamps have a plastic or rubber cushion or body to reduce vibration.

Vibration-Damping Routing Clamps

A rubber cushion reduces vibration and wear from clamp edges. The cushion also protects lines of pipe, tubing, and conduit from corrosion caused by metal-to-metal contact.

Rails for Rail-Mount Vibration-Damping Routing Clamps

Bolt or weld these rails to the mounting surface, then attach clamps with a rail nut.

Magnetic Vibration-Damping Routing Clamps

Temporarily route material across duct, racks, machinery, and other ferrous surfaces. Clamps fit tightly around pressurized lines in hydraulic systems to lessen vibration. Rubber cushions reduce wear from clamp edges and protect lines from corrosion caused by metal-to-metal contact.

Vibration-Damping Loop Clamps

A cushion covering the clamp reduces vibration and wear from clamp edges. Clamps surround lines of pipe, tubing, and conduit completely while holding them close to the mounting surface.

Multiline Vibration-Damping Loop Clamps

Organize multiple lines of pipe, tubing, and conduit with one clamp. Wider than standard loop clamps, multiline loop clamps surround two lines of material to create a secure grip while holding the lines close to the mounting surface. A cushion covering the clamp reduces vibration and wear from clamp edges.

Loop Clamps

These clamps completely surround single lines of pipe, tubing, and conduit while holding them close to the mounting surface.

Multiline Loop Clamps

Beam Clamps

Beam Clamps for Threaded Rod

Attach these clamps to the flange of an beam, then hang a threaded rod from the threaded hole.

Sloped Beam Clamps for Threaded Rod

These clamps rotate 360° and pivot 45° to ensure the rod hangs straight, even on sloped beams.

Press-Fit Beam Clamps for Threaded Rod

A toothed clip secures these clamps to the beam—no fasteners required.

Center-Mount Beam Clamps for Threaded Rod

For centered load distribution, these clamps grip both sides of the beam and hang threaded rod from the middle.

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.

Beam Clamps for Hooks and Hangers

Clamp to both sides of a beam to add an anchor point for hoists and other overhead equipment.

Perpendicular Beam-to-Beam Clamps

Add a crossbeam for hanging lifting equipment, creating overhead conveyor systems, and supporting structural applications.

Beam Clamps for Strut Channel

Support strut channel at a right angle to the beam.

Angle Iron Clamps for Threaded Rod

A secure way to hang threaded rod from a pair of angles, such as those used in ceiling joists, without the need to drill or weld. These clamps are commonly used to suspend HVAC, conveyor, and other overhead systems.

Beam Clamps with Tie Wire Hanger

Attach these light duty hangers to beams and other structural elements. They include a stiff wire for supporting ceilings, lighting fixtures, and other lightweight material.

Routing Rings and Hooks

Routing J-Hooks

Route bundles of wire and cable through a single hook. A wide opening allows access for installation, adjustment, and removal.

Routing S-Hooks

Hang these S-hooks from fencing and railing to route large bundles of material, such as cable, hose, and wire through your facility or worksite to avoid tripping hazards.

Routing Rings

Also known as bridle rings, routing rings have an open-eye design that allows you to quickly install wire and cable.

Magnetic Routing Ring Bases

Temporarily mount routing rings and other threaded components to steel and iron surfaces.

Routing Ringbolts

Mount these ringbolts into a threaded hole, or use the nut for through-hole mounting. The pivoting ring allows material to move freely.

Removable Routing Ringbolts

Anchor these ringbolts where you need them, then remove the ring when not in use. Once installed, the mounting bolt stays in place. Insert the ring by threading into the mounting bolt; remove by unthreading it.

Wire-Mount Routing Rings

Hang cable and other flexible material beneath wire to prevent it from sagging and swaying. To install, hook the two ends of the ring around the wire—no fasteners required.

Threaded Rod Fittings for Hanging

Threaded Rod Mounts

Fasten these brackets to ceilings, walls, beams, and joists to hang threaded rod.

Threaded Rod Anchors

Install directly into a mounting surface to suspend threaded rod from ceilings and walls.

U-Bolts

U-Bolt Mounting Plates

Add a mounting plate to your U-bolt for a more secure hold at the mounting surface.

U-Bolts

Mount these general purpose U-bolts into an existing bracket, or combine with a mounting plate for a secure hold at the mounting surface.

U-Bolts with Mounting Plates

A mounting plate provides a more secure hold at the mounting surface.

Clamping U-Bolts

Also known as muffler clamps, these U-bolts have a rounded mounting plate that fully surrounds pipe, conduit, and tubing for a secure fit.

Rubber-Cushioned U-Bolts

A durable rubber cushion and mounting plate prevent corrosion and wear caused by metal-to-metal contact. The mounting plate is removable, so the U-bolts can be installed onto an existing line without needing to dissemble it.

Square U-Bolts

Suspend and route flat-bottomed objects such as strut channel and small duct.

Vibration-Damping U-Bolts

Reduce vibration and noise in your lines—a plastic cushion tightly grips pipe, tubing, and conduit to prevent movement. Nylon-insert locknuts grip the thread to resist loosening.

Rubber-Cushioned Square U-Bolts

Reduce vibration and prevent metal-to-metal corrosion on flat-bottomed objects such as strut channel and small duct.

Seismic Bracing Anchors and Brackets

These OSHPD preapproved anchors and brackets support threaded-rod-mount hangers during seismic activity.

Tie Wire Hangers

Attach these light duty hangers to ceilings and walls. They have a stiff wire for supporting suspended ceilings and lighting fixtures.

Floor Routing Supports

Floor-Mount Saddle-Style Supports

These U-shaped supports allows access to pipe and conduit after installation.

Floor-Mount Clamp-Style Supports

For a secure hold on pipe and conduit suspended above the ground, these supports have a cushioned clamp provides a 360° grip while reducing vibration.

Roller Supports

Support lines that expand and contract. The roller on these supports compensates for movement in your line from changing temperatures.

Floor-Mount Flange-Style Supports

Bolt directly to a pipe flange to suspend a run of pipe above the ground.

Standoff Brackets

Combine with a U-bolt or routing clamp to convey a variety of material, such as pipe, tubing, and cable raceway, at distance from floors, walls, and ceilings. The extra clearance allows access for maintenance and adding and removing lines.

Threaded Rod Vibration Dampers

Install between two lengths of threaded rod to reduce vibration in suspended equipment, such as air-handling units, pipe, and duct.

Stud-Mount Routing Supports

Stud-Mount Routing Brackets

Mount these brackets between two studs to support copper tubing for sink faucets and other water supply fixtures.

Stud-Mount Routing Supports

Attach these supports onto metal stud knockouts to route cable, conduit, and tubing through metal studs.

Cable Holders

Mount to a surface to secure and route cable.

Staple-Style Hammer-In Cable Holders

Building and Machinery Hardware

Roller Track for Doors

Combine track, mounting brackets, and hangers to create a system for hanging doors.

Roller Track Sets for Doors

These complete sets contain everything you need to create a system for hanging doors.

Dust-Resistant Roller Track for Doors

Round track eliminates edges where dust and debris can accumulate.

Low-Profile Roller Track for Doors

Narrow track allows you to hang doors in tight spaces.

Curved Roller Track for Doors,
Curtains, and Strip Doors

Curved track pieces allow you to create a wide variety of layouts for doors, curtains, and strip doors.

Roller Track Sets for Bypassing Doors

These sets include everything you need to hang two doors that slide past each other.

Roller Track Sets for Bypassing Cabinet Doors

For smoother operation, these sets include upper and lower roller track for hanging lightweight cabinet doors that slide past each other.

Door Guides

Use these guides to help control your door's motion and keep the bottom of the door from swinging.

Strut Mount Hangers

Slip these hangers onto the lip of top-opening strut channel to attach chain, wire rope, pipe, and threaded rod.

Snap-In Strut Mount Hangers

For quick mounting of components, these hangers snap into strut channels for a strong hold and easy repositioning.

Strut Channel Trolley Brackets

Brackets mount on the outside of strut channel to allow trolley movement.

Strut Channel Trolleys

Strut Channel Beam Mounts

Mount a length of strut channel between the ends of a beam to run cable and conduit along the beam without drilling.

Strut Channel Shelf Brackets

A tab on the end of these shelf brackets fits inside the strut channel for extra stability.

Lift-Off Panel-Hanging Brackets

Interlock brackets to secure panels flush to flat surfaces.

Side-Hook Lift-Off Panel-Hanging Brackets

Fit brackets together to assemble truck racks, gates, crates, and fences.

Ceiling Tile Hanger Rods

Suspend and secure tile frames to the ceiling.

Ceiling Tile Clips

Secure ceiling tiles or join ceiling tile frame components.

Ceiling Tile Frames

Use these components to design your own frame to support ceiling tiles.

Ceiling Tile Wall Molding

Secure tile frames to the wall.

Retractable Key Holders

Extend keys from the holder when needed and a cable automatically retracts them when you're done.

Overhead-Mount Window Balancers

Mount these balancers in the corner of a horizontal frame to suspend, lift, or lower objects that move vertically in a track such as windows, doors, and panels.

Side-Mount Window Balancers

Install these balancers on a vertical frame to suspend, lift, or lower objects that move vertically in a track such as windows, doors, and panels.

Pulleys—For Horizontal Pulling

Easy-Open Hanging Pulleys for
Wire Rope—For Horizontal Pulling

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Hanging Pulleys for Wire Rope—For Horizontal Pulling

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Pulleys for Wire Rope—For Horizontal Pulling

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

Mounted Pulleys for Wire Rope—For Horizontal Pulling

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Hanging Pulleys for Rope—For Horizontal Pulling

Hang these pulleys from hooks, screws, and bolts to assist with horizontal pulling or to guide a rope.

Mounted Pulleys for Rope—For Horizontal Pulling

Mount these pulleys to a flat surface to assist with horizontal pulling or to guide a rope.

Pulleys for Rope—For Horizontal Pulling

Also known as sheaves, use these pulleys to assist with horizontal pulling or to guide a rope.

Pulleys—For Lifting

Pulleys for Wire Rope—For Lifting

Use the bore to mount these pulleys on a shaft. These pulleys are also known as sheaves.

Easy-Open Hanging Pulleys for Wire Rope—For Lifting

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Hanging Pulleys for Wire Rope—For Lifting

Hang these pulleys from hooks, screws, and bolts.

Mounted Pulleys for Wire Rope—For Lifting

Mount these pulleys to a flat surface.

Easy-Open Hanging Pulleys for Rope—For Lifting

Also known as snatch blocks, these open so it’s easier to feed the rope through the housing—a free rope end is not needed.

Hanging Pulleys for Rope—For Lifting

Hang these pulleys from hooks, screws, and bolts.

Beam Trolleys

Also known as end trucks, use these trolleys with your own beams to create a crane.

Hanger Bolts

Machine Screw-Style Hangers

You can use these versatile hangers in a threaded hole (as you would a screw), or secure them with a nut (as you would a bolt).

Eye Nut-Style Hangers

These hangers have internal threads for use with threaded rods, bolts, and anchors.

Wedge Anchor-Style Hangers

Wedge these hangers in concrete and other solid materials.

Wood Screw-Style Hangers

Drive these hangers into wood with an adjustable wrench, pliers, or a special driver bit.

Drilling Screw-Style Hangers

Drill holes with the point on these hangers.

Toggle Bolt-Style Hangers

These hangers are a popular choice for overhead applications.

Toggle Bolt-Style Hangers with Spring

The spring holds the washer and toggle against opposite sides of the wall, so everything's in position before you begin tightening. Once tightened, the spring adds vibration resistance.

Threaded Rods and Studs

Medium-Strength Steel Threaded Rods—Grade B7

These Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Metric Medium-Strength Steel
Threaded Rods—Grade B7

These metric Grade B7 threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Metric Fine-Thread Medium-Strength
Steel Threaded Rods—Grade B7

These metric Grade B7 fine-threaded rods meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Left-Hand Threaded Medium-Strength
Steel Threaded Rods—Grade B7

Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion.

Medium-Strength Steel Threaded Rods—Grade B16

Grade B16 threaded rods maintain their strength at higher temperatures than Grade B7 threaded rods. They meet the pressure and temperature requirements of ASTM A193 and are often used to secure pressure tanks, valves, and flanges.

Medium-Strength Steel Threaded Rods—Class 8.8

An economical alternative to Grade B7 and Grade B16 threaded rods, these metric Class 8.8 rods are suitable for fastening most machinery and equipment.

Low-Strength Steel Threaded Rods

About half the strength of medium-strength steel threaded rods, use these for light duty hanging, mounting, and fastening.

Metric Fine-Thread Low-Strength Steel Threaded Rods

About half the strength of medium-strength steel threaded rods, use these metric fine-thread rods for light duty hanging, mounting, and fastening.

Metric Low-Strength Steel Threaded Rods

These metric threaded rods are about half the strength of medium-strength steel threaded rods for light duty hanging, mounting, and fastening.

Metric Left-Hand Threaded
Low-Strength Steel Threaded Rods

These metric threaded rods tighten when turned to the left; once fastened, they resist loosening from counterclockwise motion. About half the strength of medium-strength steel threaded rods, use them for light duty hanging, mounting, and fastening.

Left-Hand Threaded Low-Strength
Steel Threaded Rods

Tighten these threaded rods by turning them to the left; once fastened, they resist loosening from counterclockwise motion. About half the strength of medium-strength steel threaded rods, use them for light duty hanging, mounting, and fastening.

Metric Very-High-Strength Steel
Threaded Rods—Class 12.9

Class 12.9 rods are about 20% stronger than Class 10.9 threaded rods and are for use in heavy machinery.

Metric High-Strength Steel Threaded Rods—Class 10.9

These Class 10.9 steel threaded rods are about 25% stronger than medium-strength steel rods.

High-Strength Steel Threaded Rods

Comparable to Grade 8 steel, these threaded rods have a tensile strength of 150,000 psi, making them about 25% stronger than medium-strength steel rods.

Hex Drive Threaded Rods

A hex drive on one end allows these rods to be turned with a hex key for ease of installation.

Steel Wood Screw Threaded Studs

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.

Metric Partially Threaded Studs

Screw the threaded end of these metric studs into a tapped hole and use the unthreaded end as a pivot point, hinge, shaft, or locator pin.

Steel Adhesive-Mount Studs

These steel studs are zinc plated to resist corrosion in wet environments.

Steel Right-Angle Weld Studs

Weld these studs to uncoated steel surfaces.

Weld Studs

Pass these studs through a hole and weld them in place.

Wood-to-Wood Joining Studs

Also known as dowel screws, use these to join two pieces of wood.

Steel Press-Fit Studs

These steel studs are zinc plated to resist corrosion in wet environments.

Hollow Female Threaded Rods

Connect and separate threaded rods, studs, and other components. These hollow rods have internal threads on both ends, so you can make connections and still pass wiring and other objects through the center of the rod.

Rivet Studs

Add a stud to thin material when you only have access to one side.

Anchors for Wet Concrete

Steel L-Hook Anchors for Wet Concrete

These steel anchors are available with corrosion-resistant finishes.

Steel J-Hook Anchors for Wet Concrete

These steel anchors are available with corrosion-resistant finishes.

Staples for Wire and Cable Staplers

Insulated Staples for Signal Wire

Secure and insulate round signal wire such as data and communication wire.

Staples for Building Cable

Use these flat staples to secure romex cable.

Staples for Signal Wire

These curved staples snuggly hold round signal wire such as coaxial cable and telephone wire.

Threaded Rod Assortments

Shelving and Racks

Space-Saver Coat Racks

Heavy Duty Shelf Brackets

These shelf brackets have a 500-lb. capacity—twice the capacity of our other shelf brackets.

Garment Rods

Shelf Brackets with Garment Rod Holder

Shelf Brackets

Heavy Duty Fold-Away Shelf Brackets

These brackets have greater weight capacities than standard duty fold-away shelf brackets.

Fold-Away Brackets for Drop-Leaf Shelves

Fold-Away Shelf Brackets

Multi-Position Heavy Duty Fold-Away Shelf Brackets

These brackets allow you to lower your shelf 10 or 20 degrees.

Standards and Shelf Supports
for Cabinets and Bookcases

These standards can be surface mounted or flush mounted inside a routed groove.

Quick-Mount Standards and Shelf Brackets

These standards mount to a hanging bracket or track, making them easier to install than other standards.

Double-Slotted Standards and Shelf Brackets

These standards and shelf brackets are more stable and hold heavier loads than single-slotted standards and brackets.

Standards, Shelf Brackets, and Shelves

Design a complete shelving unit with these standards, shelf brackets, and metal shelves. All components are corrosion resistant and are often used for quality control, laboratory, and food service applications.

Single-Slotted Standards and Shelf Brackets

Hanging-Document Racks

Roll your blueprints, CAD drawings, and other large documents wherever you need them with these easy-access racks.

Wall-Mount Hanging-Document Racks

Quickly access your blueprints, CAD drawings, and other large documents.

Rolled-Document Racks

The multi-tiered design allows you to store rolled documents of various sizes.

Conveying

Track for Overhead Beam Conveyors

Track provides the runway for trolleys in manual and powered systems.

Chain for Powered Overhead Beam Conveyors

Chain connects trolleys and guides movement along the track. It can be assembled and disassembled without tools, yet its design makes it difficult to disconnect while in use.

Brackets for Overhead Enclosed-Track Conveyors

Use brackets to hang and join sections of enclosed track.

Carriers for Overhead
Enclosed-Track Powered Conveyors

Carriers attach loads to the trolley chain with a scissor-like action and pivot as the conveyor makes elevation changes.

Trolley Chain for Overhead
Enclosed-Track Powered Conveyors

Carry loads along a track with this series of smooth-rolling alternating vertical and horizontal wheels.

Track for Overhead Enclosed-Track Conveyors

Track provides the runway for trolleys, carriers, and chain in manual and powered systems.

Screw Conveyors

Add on to an existing screw conveyor or keep it running like new.

Protective Equipment

Hooks for Protective Curtains

Fire Extinguisher Cabinets

Control access to fire extinguishers and guard against theft and vandalism.

Hose Reels and Holders

Hose Holders

Drape your hose over these holders to keep it out of your way.

Wall-Mount Reels for Garden Hose

Wind your garden hose around these reels to keep it neat and organized.

Manual-Winding Hose Reels

Turn the hand crank to rewind your hose.

Heavy Duty Automatic-Winding Hose Reels

These reels have more support than medium duty reels, so you can pull the hose out at an angle.

Controlled-Retraction Medium Duty
Automatic-Winding Hose Reels

Also known as safety reels, these have a retraction speed that's up to 80% slower than other automatic-winding hose reels.

Controlled-Retraction Heavy Duty
Automatic-Winding Hose Reels

Also known as safety reels, these have a retraction speed that's up to 80% slower than other automatic-winding hose reels.

Medium Duty Automatic-Winding Hose Reels

Use these reels in applications where the hose is pulled straight out of the reel.

Air Hose

Enclosed Reels with Lightweight
Air Hose and Electric Cord

Protect your hose when it’s not in use.

Reels with Lightweight Air Hose and Electric Cord

Reels with Lightweight Air Hose with Threaded Fittings

Reels with Lightweight Air Hose with
Quick-Disconnect and Threaded Fittings

Enclosed Reels with Lightweight Air Hose

Protect your hose when it’s not in use.

Reels with Double Lightweight Air Hose

Enclosed Reels with Double Lightweight Air Hose

Protect your hose when it’s not in use.

Manual Reels with Lightweight Air Hose

Turn the handle to rewind the hose.

Reels with Air Hose with Threaded Fittings

Reels with Air Hose with
Quick-Disconnect and Threaded Fittings

Compact Reels with Air Hose

Designed for areas where space is limited, these reels have the smallest overall size of all our reels.

Reels with Lubricated-Air Hose with Threaded Fittings

Reels with Lubricated-Air Hose with
Quick-Disconnect and Threaded Fittings

Reels with Hydraulic Hose

Reels with Welding Hose

Wire Rope Lanyards—Not for Lifting

Adjustable-Loop-to-Hook Lanyards—Not for Lifting

Create a choker loop around a supporting structure with the snap-hook end and use the loop to secure the suspended material.

Adjustable-Loop-to-90° Eye Lanyards—Not for Lifting

Attach the 90° eye to a surface for support and use the loop to secure the suspended material.

Adjustable-Loop-to-Stud Lanyards—Not for Lifting

Attach to a threaded anchor or hole for support and use the loop to secure the suspended material.

Adjustable-Loop-to-Twin-Hook Lanyards—Not for Lifting

Use the twin hooks to suspend items from two points and use the loop to secure the suspended material. For use with cable trays or signs.

Loop-to-Loop Lanyards—Not for Lifting

Loop-to-Eye Lanyards—Not for Lifting

Loop-to-Tab Lanyards—Not for Lifting

Loop-to-Tab Retractable Lanyards—Not for Lifting

Loop-to-Eye Retractable Lanyards—Not for Lifting

Loop-to-Loop Retractable Lanyards—Not for Lifting

Eye Nuts—For Lifting

Create your own lifting eye by adding an eye nut to a stud or bolt.

Power Transmission

Extension Spring Stud Anchors

A black-oxide finish provides mild corrosion resistance.

Swiveling Extension Spring Stud Anchors

A black-oxide finish provides mild corrosion resistance.

Connecting Rods

Designed for use with right-hand, internally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.

Internally Threaded Connecting Rods

Designed for use with right-hand, externally threaded rod ends, these rods have right-hand threads on both ends. Use them for remote valve operators, throttle controllers, shifting mechanisms, and virtually any push/pull assembly.

Turnbuckle-Style Connecting Rods

Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension. Add right- and left-hand threaded rod ends to build your linkages.

Internally Threaded Turnbuckle-Style Connecting Rods

Similar to turnbuckles, these rods have right-hand threads on one end and left-hand threads on the other so you can make a linkage that adjusts for tension.

Support Arms

Suspend tools to keep them out of the way but still within reach.

Shower Curtain Hooks

Wire Bin Boxes

Unlike other bin boxes, wire bin boxes are easy to clean and don't collect dust.

Wire, Cable, and Hose Routing & Protecting

Zinc-Plated Steel Formable Cable and Hose Trays

The zinc plating on these tray systems offers good corrosion resistance.

Steel Formable Cable and Hose Trays

Cut, bend, and connect these wire mesh tray systems to route cable and hose in configurations such as curves, slopes, and tees.

Cable and Hose Trays

Create a system to route cable and hose by connecting components such as straight trays and tees.

Single-Loop Cable Support Grips

These grips are galvanized steel for good corrosion resistance.

Self-Tightening Cable Support Grips

The loops tighten by the weight of your cable or by manual adjustment. These grips are often wrapped around a beam or pipe.

Heavy Duty Open Cable and Hose Carriers

A more durable construction with a zinc-plated steel frame provides strength for a longer service life than other open cable and hose carriers.

Accessories for Any-Which-Way
Cable and Hose Carriers

Use these accessories to mount carriers to your machinery without creating an obstruction.

Shelves for Electronics Cabinets

Mount these shelves in standard electronics cabinets that are 19 in. wide to hold components that cannot fit directly to the enclosure.

Paper Clips and Holders

Bulldog Clips

Secure small objects with these clips.

Binder Clips

Fixturing Track

Slide 1/4"-20 hex head screws anywhere along the track to create mounting points for clamps and jigs.

Insulation Hanger Studs

Attach these hanger studs to a flat surface, then press your insulation sheets onto the spikes and secure with a washer.

Sign Posts, Bases, and Brackets

Large-Diameter Sign-Mounting Brackets

Mount a sign to a 4" to 12" diameter post or column.

Sign Stakes

Drive these stakes into the ground and then slide a foam or corrugated plastic sign over the top.

Pegboards for Workbenches

Keep tools visible and organized above a workbench.

Hooks

Heavy Duty Hooks

Hooks

Hook Racks

Heavy Duty Hook Racks

Magnet-Mount Hooks

Under-Mount Hooks

Over-the-Door Hooks

Screw-In Hooks

Reusable Adhesive-Back Hooks

Vacuum Hooks

Nail-In Hooks

Holders

Holders

Holder Racks

Magnet-Mount Holders

Magnet-Mount Holder Racks

Screw-In Holders

Bottle Holders

Angle Grinder Holders

Wipe Box Holders

Stretch Wrap Holders

Pegboards

Pegboard Hooks

Pegboard Holders

Pegboard Assortments

Stay-Put Pegboard Holders

Stay-Put Pegboard Hooks

Stay-Put Pegboard Assortments

Pegboard Bottle Holders

Pegboard Hook Retainer Clips

Pegboard Strips

Heavy Duty Pegboards

Pegboard Trays

Pegboard Baskets

Pegboard Bin-Box Clips

Pegboard Bulldog Clips

Pegboard Shelf Brackets

Slatwall

Slatwall Holders

Slatwall Hooks

Slatwall Magnetic Holders

Slatwall Shelf Brackets

Slatwall Baskets

Slatwall Shelves

Coat Hangers

Coat Hangers

Hangers for Suspended Ceilings

Hangers for Suspended Ceilings

Picture Hanging Brackets

Picture Hanging Brackets

Magnetic Holders

Magnetic Holders

Hangers for Pipe, Tube, and Conduit

Threaded-Rod-Mount Clamping Hangers

Stackable Threaded-Rod-Mount Clamping Hangers

Vibration-DampingThreaded-Rod-Mount Clamping Hangers

Pivoting Threaded-Rod-Mount Loop Hangers

Swivel Threaded-Rod-Mount Loop Hangers

Side-Load Threaded-Rod-Mount Loop Hangers

Threaded-Rod-Mount Roller Loop Hangers

Pipe Cradles for Loop Hangers

Threaded-Rod-Mount Multiline Hangers

Weld-Mount Clamping Hangers

Strap Hangers

Strap-Mount Clamping Hangers

Clamping Hangers

Suspension Beams for Threaded Rod

Routing Clamps

Strut-Mount Metal Routing Clamps

Low-Profile Strut-Mount Metal Routing Clamps

Standoff Strut-Mount Metal Routing Clamps

Strut-Mount Metal Routing Clamps for Insulated Pipe

Narrow-Space Strut-Mount Metal Routing Clamps

Routing Clamps

Two-Line Routing Clamps

Strut-Mount Vibration-Damping Routing Clamps

Vibration-Damping Routing Clamps

Rails for Rail-Mount Vibration-Damping Routing Clamps

Magnetic Vibration-Damping Routing Clamps

Vibration-Damping
Threaded-Rod-Mount Clamping Hangers

Easy-Position Beam Clamps
for Pipe, Tube, and Conduit

Curved Roller Track for Doors,
Curtains, and Strip Doors