Install these clevis-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Install these eye-end plug-lock fittings on the end of wire rope for a strong hold and finished appearance.

Place the wire rope and sleeve through a hole in the assembly block and tighten into a vise to hold. Then attach the plug driver on the end of a plug to make hammering in the plug easier.

Also known as socket-end swage fittings, install these ball-with-shank-end fittings with a roller swage press for a strong, permanent hold.

Also known as socket-end swage fittings, install these stud-end fittings with a roller swage press for a strong, permanent hold.

Add a mounting plate to wire rope without having to fray the rope or use a compression tool.

Add an eye-end to wire rope without having to fray the rope or use a compression tool.

Feed the wire rope into the opening at the bottom of these eye-end fittings and through the body for a quick and simple installation.

Feed the wire rope into the opening at the bottom of these clevis-end fittings and through the body for a quick and simple installation.

Compress the thin shank wall with a hand tool to attach these light duty eye-end fittings. They are also known as hand swage fittings.

Install these clamps without any specific orientation, slide the nut over the rope and tighten it onto the threaded halves with a torque wrench.

Constructed with a saddle for both the long (live) end and the short (dead) end, these clamps apply equal pressure without crimping or crushing the wire rope, so orientation doesn't matter. Also known as fist grip wire rope clips.

Kits include clamps and thimbles to support a wire rope loop and prevent it from fraying. Clamps must be oriented with the saddle on the long (live) end and U-bolt on the short (dead) end.

Create a loop by feeding the wire rope through the clamp and tighten the set screw to secure it in place. Loosen the set screw to quickly adjust the loop. Also known as Gripple rope clamps. They are for use in noncritical applications, such as fencing.

These compression sleeves are designed to meet lifting specifications.

These kits include two compression sleeves paired with two thimbles. The thimbles support the wire rope loops and prevent it from fraying.

Also known as heavy-pattern thimbles, these can be used to reinforce the loop of a sling.

Also known as standard-pattern thimbles, these provide better protection against fraying than light duty thimbles.

Compress sleeves with more force than hydraulic hand tools.

Use these turnbuckles in lifting applications with wire rope. Their closed body not only protects threads from damage and debris, but also keeps these turnbuckles slim enough to fit in tight spaces.

Create a wire rope railing, perimeter, or barrier.

The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.

The closed body protects threads from damage and debris and has a slim profile to fit in tight spaces.