Container Size Container Size |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
For Use On For Use On |
|---|
|
For Topcoat Composition For Topcoat Composition |
|---|
|
Heat Treating Temperature Heat Treating Temperature |
|---|
|
Type Type |
|---|
|
Composition Composition |
|---|
|
About Paint and Protective Coatings
More
Quenching Oil
For controlled cooling, use quenching oil instead of water to minimize cracking and distortion after heat treating parts and tools. It's nonstaining and chlorine and sulfur free. Use full strength.
Surface-Protection Compounds for Steel
When heat treating steel to harden it, use these compounds to protect the surfaces you don’t want to harden. Also known as stop-off paint, all are compatible with gas mixtures that are used in gas carburizing and carbonitriding processes. Brush or dip the compounds on your surfaces and then air dry before heat treating. After heating, any residue that’s left behind can be easily washed away with hot water.
Solvent-based compounds stand up to temperature and humidity better than water-based compounds, so they dry quicker. To maintain their original consistency, use the optional xylene to thin these compounds.
Water-based compounds emit less VOCs (volatile organic compounds) than solvent-based compounds for less impact on the environment. To maintain their original consistency, simply use water to thin these compounds.
VOC regulations restrict sales to the listed jurisdictions/areas.
Surface-Protection Compounds | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
Container | Xylene | ||||||||||
| Size | Type | Material | Drying Time, hrs. | For Maximum Surface Temperature, °F | For Maximum Treatment Temperature, °F | Cannot Be Sold To | Each | Container Size | Each | ||
Solvent Based | |||||||||||
| 1 qt. | Can | Metal | 1-3 | 70° | 1,750° | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 | 1 pt. | 00000000 | 00000 |
| 1 gal. | Can | Metal | 1-3 | 70° | 1,750° | Los Angeles County, CA, Orange County, CA, Riverside County, CA, San Bernardino County, CA | 0000000 | 000000 | 1 pt. | 00000000 | 0000 |
Water Based | |||||||||||
| 1 qt. | Bottle | Plastic | 3-8 | 70° | 1,740° | __ | 0000000 | 00000 | __ | 000000 | 00 |
Heat-and-Quench Surface-Hardening Compounds for Steel
Create a hard, wear-resistant surface on carbon steel parts. Sprinkle compound over a heated part, heat again, and cool in quenching fluid.
Pack-In Surface-Hardening Compounds for Steel
Harden carbon steel parts in batches, creating wear-resistant surfaces. Place parts in a vented steel container, pack compound around parts, seal container tightly, and heat to 1750° F.
Granular Sorbents for Flammable Liquids
Safely clean up fuel and other flammable liquids with these fire-retardant sorbents. Unlike clay and corn cob, these mineral-based sorbents trap vapors and reduce the risk that a spill will ignite.
Granular Sorbents
Pour over contained spills to absorb and clean up.
Clay sorbents reduce slipping and won't break down, cake, or mat under heavy traffic. They are low-dust and nonflammable. Sorbent in the 20-lb. pail has smaller granules than the sorbent in the bag, offering higher absorbency per pound.
Coatings for Concrete Floors
Protect concrete from mild chemicals, salts, soaps, and detergents. Use on concrete that's at least 30 days old.
Apply clear coatings with a roller or sprayer.
Dry Time | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Touch | Overall | Approximate Coverage, sq. ft. | Max. Temp., °F | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
| 1 | Water Based | 60 min. | 3 days | 300 | Not Rated° | 50° to 90° | Concrete | Clear (Satin) | 0000000 | 000000 |
Cure-and-Seal Coatings for Concrete Floors
Seal freshly finished concrete to prevent it from drying too quickly during the curing process. These coatings also protect against mild chemicals, salts, soaps, and detergents. Apply with a brush, roller, or sprayer.
Dry Time | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Container Size, gal. | Composition | Touch, hrs. | Overall, hrs. | Approx. Coverage @ Thick. | Application Temp. Range, °F | For Use On | Color (Appearance) | Each | |
| 5 | Water Based | 2.5 | 12 | 1,500 sq. ft. @ 2 mil | 40° to 90° | Concrete | Clear (Gloss) | 0000000 | 0000000 |
Safe-Disposal Hardeners for Paint and Coatings
Harden spilled or unused paint so you can dispose of it in a standard trash can. Mix this powder into water- or solvent-based paint to harden it in minutes. One bag hardens 2/3 of a gallon of paint.
| For Topcoat Composition | Container Size, oz. | For Container Size, gal. | Begins to Harden, min. | Each | |
| Solvent Based, Water Based | 3.5 | 2/3 | 5 | 000000 | 00000 |