These assortments include hex head screws and hex nuts.

These assortments include pan head screws.

Fasten sheet metal up to 0.200" thick.

Flat head screws are angled under the head to fit flush within countersunk holes.

Shoulder screws have a cylindrical shoulder under the head that allows parts to rotate around or slide along its length. They have a standard shoulder with an undersized tolerance to fit most machinery and equipment.

A nylon insert grips threads to resist loosening.

These rivet nuts have a smooth body and fit in smaller holes than twist-resistant rivet nuts. Assortments include rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.

Cap nuts cover and protect threads while providing a finished appearance.

SAE washers generally have a smaller ID and OD than USS washers.

USS washers generally have a larger ID and OD than SAE washers.

Teeth bite into the joint for a tighter grip than split lock washers.

Inserts come with a through-hole tap and installation tool.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.

These assortments include various sizes of thread-locking inserts.

Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

Assortments include various sizes of tapping inserts for hardwood.

These sets include an assortment of sockets and wrenches for occasional maintenance work.

These tools have an insulated grip to protect against accidental contact with live electrical circuits. They are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

Extra-long bits allow access to hard-to-reach fasteners.

A ratchet mechanism allows you to turn fasteners without removing and repositioning the socket.

Make maximum contact on all sides of a fastener to reduce slipping. These sockets are also known as torque adapters.

Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Pivot the head to access fasteners from an angle.

Quickly position these sockets on square fasteners.

Suitable for occasional maintenance work, these sets are imported.

Attach to your socket for a longer reach.

These sockets are made to withstand the high torque and force of impact tools.

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

Pivot the head to access fasteners from an angle.

Prevent overtightening that can damage fasteners. These adapters spring back slightly when the set torque is reached.

The heads are offset 45° to provide clearance for reaching over obstructions.

A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.

The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.

The slim heads fit into tight spaces and around thin fasteners.

One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.

Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.

When turning fasteners in small spaces, these short wrenches fit where others can't.

The handle is covered in plastic for a comfortable grip.

The handles are covered in plastic for a comfortable grip.

These wrenches are made of stainless steel for excellent corrosion resistance.

Pivot the box end for access to fasteners in tight spots.

A lever reverses the ratchet direction.

The box end has a 30° offset head that provides clearance when reaching over obstructions.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.

Made of beryllium copper that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant.

Quickly find the wrenches you're looking for with these brightly colored sets.

The head pivots to accommodate a range of diameters.

Sets include various sizes of wrenches that are shaped to fit round holes on the circumference of collars, bearings, and other machine tool components.

Sets include an assortment of drivers with a suede-like textured handle that provides a firm grip, even for oily hands.

Sets include an assortment of drivers with a cushioned grip that provides comfort and some slip resistance.

Sets include an assortment of drivers.

The assorted drivers in these sets have a holding mechanism at the tip that ensures the screw won’t slip off.

The assorted drivers in these sets have a shaft that extends through the handle and a steel end cap, which provide the strength to absorb hammer blows.

A scaled-down version of standard screwdrivers, these tools are shorter, slimmer, and easy to take with you.

These assorted screwdrivers are made of beryllium copper that is FM approved. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.

Sets include assorted drivers with an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet IEC, EN, or ASTM standards.

The ball-end tip allows angled entry to turn screws in hard-to-reach areas. These tools are a scaled-down version of standard changeable-shaft screwdrivers, They're shorter, slimmer, and easy to take with you. Remove and replace the shaft to change the tip size.

A scaled-down version of standard changeable-shaft screwdrivers, these tools are shorter, slimmer, and easy to take with you. Remove and replace the shaft to use a different tip size.

Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.