Made of heat-resistant Nomex, these harnesses withstand temperatures up to 700° F.

D-rings on each hip provide a stable working position.

Hook these straps to your harness to add length to the existing D-ring and make it easier to attach a fall-arrest lanyard.

Prevent suspension trauma when hanging motionless.

Attach these rings to any harness to keep excess lanyard webbing out of the way.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications.

Made of steel, these durable lanyards hold up in abrasive and high-heat applications.

Configure a connector for your application—combine housings with pins and sleeves for different wire sizes. They fit AMP MATE-N-LOK connectors.

A sealed housing protects connectors from weather. Sets include a plug and socket with wire leads already installed. They fit standard Molex connectors.

Connect batteries to each other or to electrical systems.

Use these cords in vehicles and other agricultural and construction equipment.

Join pieces of conduit.

Also known as Type B, this conduit is more crush and abrasion resistant than liquid-tight flexible plastic conduit.

In addition to resisting oil, this conduit resists lubricants and grease.

Run conduit in food areas—the cover can be cleaned and sterilized without weakening or splitting. This conduit meets NSF/ANSI standard 169 for special-purpose food equipment.

Even in temperatures as low as -50° F and as high as 220° F, this conduit stays flexible.

Attach conduit and armored cable to a knockout in an outlet box or enclosure.

Also known as FMC, this conduit offers the crush resistance of metal combined with flexibility to handle bends in tight spaces.

Protect fiber optic cable with this small-diameter conduit.

Thicker corrugations make this conduit more crush resistant than standard flexible plastic conduit.

Make tight bends in machine and equipment wiring.

Connect different sizes of conduit.

Visually identify different runs of wire and cable in machine and equipment wiring.

Made of brass, these adapters provide electromagnetic interference (EMI) protection when connecting shielded flexible plastic conduit to a knockout in an outlet box or enclosure.

This is also known as PVC Schedule 40 conduit.

Connect different sizes and genders of conduit.

Reduce the knockout size in an outlet box or enclosure so you can attach a different size of conduit to it.

Connect to the end of conduit or a fitting to protect wires from abrasion when being pulled.

Ground conduit by running a ground wire through the attached lug.

This impact- and crush-resistant conduit is also known as galvanized rigid conduit (GRC).

Connect different sizes of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Attach conduit to a knockout in an outlet box or enclosure.

This nonmagnetic aluminum conduit withstands damp and corrosive environments.

Join pieces of conduit.

Attach conduit to a knockout in an outlet box or enclosure.

Also known as electrical metallic tubing (EMT), this conduit has thin walls that easily bend with a conduit bender and can be cut with a hacksaw.

Visually identify different runs of wire and cable along walls and ceilings with this conduit that has a painted exterior.

Slide these grommets into conduit ends to protect wire and cable from abrasion when being pulled.

Join pieces of conduit.

In addition to continuous-motion applications such as robotics, this conduit is suitable for high-vibration applications.

These fittings seal out liquid when used with continuous-flex liquid-tight plastic conduit.

Transition between conduit sizes and types.

Secure threaded metal conduit fittings to a knockout in an outlet box or enclosure.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Protect cable, hose, and pipe in high temperature environments—this sleeving withstands temperatures over 450° F. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Braided from thick plastic strands, this sleeving has excellent abrasion resistance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Rated UL 2024 and NFPA 262, this sleeving is approved for use in plenum spaces such as duct work and above a drop ceiling. It self-extinguishes and emits minimal amounts of smoke and gas during combustion. Stretch to fit over items for easy installation; it tightens around its contents for a secure fit.

Made of PVC, this sleeving resists chemicals, oil, and acids.

This sleeving withstands temperatures up to 390° F and is often used to insulate connections in transformers and relays. It prevents electricity and heat from dissipating from wire and cable.

Made from thicker and denser fiberglass than standard spark-resistant sleeving, this sleeving is more abrasion resistant and provides better insulation. The silicone rubber coating protects against sparks and molten metal splash.

Narrower slots and fingers create more access and routing points than on standard slotted wire duct.

A hinged cover allows easy access to your wire and cable. It also keeps the sidewalls secure, so this duct is sturdier than duct with a snap-on cover.

This wire duct completely encloses wire and cable.

Made of Nomex fabric, this sleeving has excellent tear resistance and better abrasion resistance than nylon sleeving.

A blend of Aramid and fiberglass gives this sleeving excellent abrasion resistance. It can withstand temperatures up to 650° F

With a temperature rating of 1800° F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

Made of nylon, this sleeving is the most impact- and abrasion-resistant slit corrugated sleeving we offer. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 300° F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

The corrugated construction gives this sleeving impact and abrasion resistance similar to conduit, but with more flexibility.

This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.

A strip of hook-and-loop creates a strong seal along the entire length of this sleeving, yet it can be opened at any point to access contents. Use it to wrap around wire, cable, or hose without disconnecting them.

Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390° F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Often used in robotics and other automated applications, this highly flexible sleeving withstands continuous motion without tearing or fraying. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.