Arc-Flash-Protection Clothing Kits
For protection from arc flash hazards, these kits include several of the safety items you may need. All items meet NFPA 70E for protection against flames and electrical arc flashes.
Choose clothing that meets the arc rated personal protective equipment (PPE) category required by your workplace. PPE Category 2 kits have the most common arc-flash-protection rating for industrial applications. PPE Category 4 kits provide the highest level of protection from arc flashes.
Style B kits come with a hard hat, face shield, hood, coveralls, and two storage bags.
Style C kits come with a hood, jacket, bib overalls, and two storage bags. The jacket and bib overalls are made of Gore-Tex Pyrad, which is lighter in weight than most Category 4 fabrics, but just as protective.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any garments you expect to wear under the protective clothing.
Clothing kits that cannot be sold to the listed areas are restricted due to chemical regulations.
Hard Hat | Face Shield | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Arc Rated PPE Category  | Arc Rating, cal/cm2 | No. of Suspension Points | Material | Hat Size | Lens Material | Lens Ht. | Lens Wd. | Lens Thick. | Size (Chest Size) | Each | |
| 2 | 8 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 12" | 8" | 0.09" | L (48") | 000000 | 0000000 |
| 2 | 12 | 4 | Polyethylene Plastic | 6 1/2-8 | Polycarbonate Plastic | 12" | 8" | 0.09" | L (48") | 000000 | 000000 |
Hood | Jacket | Bib Overalls | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Arc Rated PPE Category | Arc Rating, cal/cm2 | Material | Face Shield Material | Size | Closure Type | Cuff Style | Inseam Lg. | Cuff Style | Cannot Be Sold To | Size (Chest Size) | Each | |
| 4 | 40 | Gore-Tex Pyrad | Polycarbonate Plastic | One Size | Zipper | Knit | 32" | Zipper | CA, NY | L (42"/45") | 00000000 | 000000000 |
Ultra-Flame-Resistant Clothing Kits
Withstand flash fire for up to 8 seconds—the clothes in these kits can protect you for twice as long as most flame-resistant clothing. Made of rayon/aramid, the coveralls and mask absorb moisture to keep you cool and comfortable.
The coveralls have a 10 ft. Kevlar strap, so nearby teammates can pull you to safety without putting themselves at risk if there’s a fire. The reflective stripes keep you easy to see where there's low visibility. The zipper closure on the front is covered by a hook-and-loop flap so it doesn't scrape equipment or get hot. The legs have zippers on the sides as well, so you can fit them over bulky boots. Tighten the hook and loop straps on the bottom of the pants to keep flames out. The sleeves have cuffs with thumb holes to keep the sleeves in place and prevent flames from sneaking in.
Measure around the fullest part of your chest to determine your size. Take all measurements over any clothing you expect to wear under the coveralls.
Clothing kits cannot be sold to the listed areas due to product regulations.
Available Sizes | ||
|---|---|---|
| Size | Chest Size | Inseam Lg. |
| L | 52" | 26" |
Coveralls | Mask | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Specifications Met | Color | Material | Specifications Met | Color | Size | Includes | Cannot Be Sold To | Size | Each | |
| Rayon/Aramid Fabric Blend | ASTM F1506 | Black | Rayon/Aramid Fabric Blend | ASTM F1506 | Brown | One Size | Coveralls, Mask, Storage Bag | CA, NY | L | 00000000 | 000000000 |
Shop Hats
Keep sweat out of your eyes with these breathable cotton hats. All are machine washable.
When measuring head circumference, measure just above your ear, where the hat will rest. If you are between sizes, order one size up.
Caps have a brim to shade your eyes from sun and glare. They also have a built-in sweatband.
Beanies are designed for a snug fit.
Available Sizes | |
|---|---|
| Size | Head Circumference |
| L | 23 1/2" |
Cold-Protection Clothing Kits
Shield your torso, face, and hands from extremely cold materials, such as liquid nitrogen and dry ice. These kits include a cryogenic apron and gloves that withstand temperatures as cold as -320° F. Made of Cordura nylon fabric, the aprons are waterproof and resist cuts. They have adjustable neck and waist straps with buckles for quick removal. A breathable liner in the nylon gloves wicks moisture. Their open cuff design lets you easily slip them on and off. These kits also have a polycarbonate face shield that blocks splashes and won’t easily crack if dropped. Unlike standard face shields, these shields won’t fog up when cold liquids splash them. The face shield has a ratchet adjustment in the back and a pinlock adjustment in the front, so you can get a comfortable fit.
These kits cannot be sold to the listed areas due to product regulations.
Available Sizes | |
|---|---|
| Size | Glove Size |
| L | 10 |
Apron | Face Shield | Gloves | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Material | Wd. | Lg. | Min. Temperature, °F | Lens Material | Lens Ht. | Lens Wd. | Lens Thick. | Material | Lg. | Min. Temperature, °F | Cuff Style | Cannot Be Sold To | Glove Size | Each | |
| Cordura Nylon Fabric | 24" | 42" | -320° | Polycarbonate Plastic | 20" | 10" | 0.06" | Nylon Fabric | 14" | -320° | Open | CA, NY | L | 00000000 | 0000000 |
High-Visibility Hats
Brights colors and reflective strips on these hats help you stand out in low-visibility areas. They’re often worn on shop floors and when operating machinery. These hats are made of polyester fabric for all-day comfort and breathability.
Hats rated ANSI/ISEA 107 meet fluorescent and reflective design standards for high-visibility accessories.
Hats with a UPF 50 rating block at least 98% of UV rays to protect your skin. They also have an adjustable cinch cord, so you can customize the fit.
When measuring head circumference, measure just above your ear, where the hat will rest. If you are between sizes, order one size up.
Available Sizes | |
|---|---|
| Size | Head Circumference |
| L | 25 3/16" |
| Ultraviolet Protection Factor (UPF) | Material | Construction | Closure Type | Color | Size | Each | |
ANSI/ISEA 107 Rated | |||||||
|---|---|---|---|---|---|---|---|
Full Brim | |||||||
| 50 | Polyester Fabric | Mesh | Cinch Cord | Fluorescent Yellow | L | 00000000 | 000000 |
Clean Room Hoods
Prevent dust, microbes and other pollutants from contaminating a clean room. When laundered to clean room standards, these hoods can be reused up to 100 times. Wash them prior to first use and after each use.
All hoods are suitable for use in clean rooms rated to both Federal Standard and ISO classes. In both standards, clean rooms with lower class ratings have fewer contaminants.
Polyester/carbon fiber hoods discharge static electricity and prevent the buildup of static from harming electronic equipment.
Polyester hoods withstand liquid splashes and abrasion.
| Environmental Rating | Hood Style | Material | Surface Resistivity, ohms/sq. | Closure Type | Features | Color | Size | Each | |
| Fed. Std. Class 1,000, ISO Class 6 | Open Face | Polyester/Carbon Fiber Fabric Blend | 107 | Snaps | __ | White | L | 00000000 | 000000 |
| Fed. Std. Class 1,000, ISO Class 6 | Covered Face | Polyester Fabric | __ | Snaps | Detachable Face Cover | White | L | 0000000 | 00000 |
Rain Hats
These sturdy hats are made of PVC-coated polyester to resist tears and mildew. A full brim shields rain from all sides. They're washable.
When measuring head circumference, measure just above your ear, where the hat will rest. If you are between sizes, order one size up.
Available Sizes | |
|---|---|
| Size | Head Circumference |
| L | 23" |
| Material | Coating Material | Color | Size | Each | |
| Polyester Fabric | PVC Plastic | Yellow | L | 00000000 | 000000 |
Spark-Resistant Hats
Flares and fires are no match for these flame-retardant hats. They are snug enough to fit under a welding helmet. To select the right size, measure your head circumference just above your ears, where the hat will rest. If you are between sizes, order one size up.
Cotton beanies and caps are breathable and washable. They’re treated to protect against low radiant heat and minor sparks from small welding jobs.
Available Sizes | |
|---|---|
| Size | Head Circumference |
Cotton Fabric | |
| L | 21 7/8"-23" |
| Material | Color | Size | Each | |
| Cotton Fabric | Black/Blue | L | 0000000 | 00000 |
Welding Clothing Kits
Protect your torso, hands, and eyes from sparks, spatter, and heat in welding areas. Each of these kits come with basic safety gear, common welding accessories, and a four-gallon bucket for easy gear transport. The included jacket protects against low radiant heat, with leather sleeves for added heat protection and cut resistance. Three pairs of gloves—one for TIG welding, one for stick welding, and one pair of standard leather work gloves—ensure you have the hand protection you need. These kits also come with two pairs of glasses: shaded ones to guard from harmful infrared light, plus a pair of standard safety glasses.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under the protective clothing.
Jacket | Gloves | Safety Glasses | Welding Glasses | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Body Material | Sleeve Material | Closure Type | Size | Material | Lg. | Glove Size | Lens Properties | Lens Material | Shade Number | Lens Material | Includes | Each | |
| Cotton Fabric | Leather | Snap | M | Kidskin Leather Cowhide Leather Cowhide Leather | 14" 9 1/4" 15 1/2" | M (8) M (8) L (9) | Fog Free | Polycarbonate Plastic | 5 | Polycarbonate Plastic | One Jacket, One Shirt, Three Pairs of Gloves, Two Safety Glasses, Bucket, Gas Torch Lighter, Soapstone with Holder, Tip Cleaner, Welding Hammer, Wire Brush | 0000000 | 0000000 |
| Cotton Fabric | Leather | Snap | L | Kidskin Leather Cowhide Leather Cowhide Leather | 14 1/4" 9 1/2" 15 1/2" | L (9) L (9) L (9) | Fog Free | Polycarbonate Plastic | 5 | Polycarbonate Plastic | One Jacket, One Shirt, Three Pairs of Gloves, Two Safety Glasses, Bucket, Gas Torch Lighter, Soapstone with Holder, Tip Cleaner, Welding Hammer, Wire Brush | 0000000 | 000000 |
| Cotton Fabric | Leather | Snap | XL | Kidskin Leather Cowhide Leather Cowhide Leather | 14 1/2" 9 3/4" 15 1/2" | XL (10) XL (10) L (9) | Fog Free | Polycarbonate Plastic | 5 | Polycarbonate Plastic | One Jacket, One Shirt, Three Pairs of Gloves, Two Safety Glasses, Bucket, Gas Torch Lighter, Soapstone with Holder, Tip Cleaner, Welding Hammer, Wire Brush | 0000000 | 000000 |
| Cotton Fabric | Leather | Snap | 2XL | Kidskin Leather Cowhide Leather Cowhide Leather | 14 1/2" 9 3/4" 15 1/2" | XL (10) XL (10) L (9) | Fog Free | Polycarbonate Plastic | 5 | Polycarbonate Plastic | One Jacket, One Shirt, Three Pairs of Gloves, Two Safety Glasses, Bucket, Gas Torch Lighter, Soapstone with Holder, Tip Cleaner, Welding Hammer, Wire Brush | 0000000 | 000000 |
| Cotton Fabric | Leather | Snap | 3XL | Kidskin Leather Cowhide Leather Cowhide Leather | 14 1/2" 9 3/4" 15 1/2" | XL (10) XL (10) L (9) | Fog Free | Polycarbonate Plastic | 5 | Polycarbonate Plastic | One Jacket, One Shirt, Three Pairs of Gloves, Two Safety Glasses, Bucket, Gas Torch Lighter, Soapstone with Holder, Tip Cleaner, Welding Hammer, Wire Brush | 0000000 | 000000 |
Bicycle Helmets
To prevent brain injuries during an accident, these helmets have a multi-directional impact protection system (MIPS). This system works by using a low-friction layer inside the helmet, which allows your head to shift slightly during impact. This slight shift directs rotational force away from the brain, reducing your risk of injury.
To adjust the fit of the helmet, turn the ratchet. A reflective sticker and reflective threads on the chin strap help you stand out in the dark.
Available Sizes | |
|---|---|
| Size | Head Circumference |
| L | 23 1/8"-24 3/8" |
| Helmet Safety System | Material | Color | Features | Size | Each | |
Ratchet Adjustment | ||||||
|---|---|---|---|---|---|---|
| MIPS | Polycarbonate Plastic | Black | Reflective Sticker and Chin Strap | L | 00000000 | 000000 |