Flood hazardous areas with light—these lights are intrinsically safe, meaning they can’t cause an explosion or fire. Rated NEC Class I, II, III, and Zone 0, they’re safe to use in areas with ignitable concentrations of flammable or combustible gases, dust, and fibers. They’re often used in refineries, mines, and paint booths. Pivot their head up and down to direct light where you need it most. These lights are rechargeable, compact, and include a carrying case for easy transport to jobsites without power.

They’re durable enough to fall from 6 ft. and still work. The edges of the metal body are cushioned with rubber, and the lens is impact-resistant polycarbonate. Rated IP67, they are sealed against dust and water. You can drop them in water, and they’ll keep working. These lights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

Mount them using the extendable swivel hook on the back or the magnet in the base. The hook also functions as a carrying handle. Add a tripod if there’s nowhere to mount the light and you need to position it higher than on the ground.

Safely light up large spaces where combustible gases and dust are normally present. Rated NEC Class I and II, these lights have a housing that contains any sparks or flames and seals out ignitable gases, vapors, and dust. They’re rated T5, an NEC hazardous location temperature classification. This means their surface temperature stays below 212° F to prevent them from reacting with nearby flammable substances. Made of lightweight, durable aluminum with a tempered glass lens, they withstand bumps and rough handling. They’re often used in chemical processing, refineries, and paint spray booths.

Unless noted, the plug and power supply on these lights are outdoor rated but are not explosion-proof rated. Electrical connections must be made outside the hazardous environment.

Style A can withstand extreme weather and washdowns. Rated NEMA 6P, you can plunge them 6 ft. underwater for 24 hrs. and they’ll still work. They’re easy to move around since they weigh just 10 lbs. Rubber bumpers prevent damage if they’re bumped or dropped. Those with an explosion-proof power supply have a sealed enclosure, so you can make safe electrical connections within the hazardous environment. Their power supply and plug are explosion-proof rated.

Style B are rated NEC Class III for use in areas with ignitable concentration of combustible fibers and other particles. Rated IP67, they’re dust tight and you can plunge them in 3 ft. of water for 30 mins. and they’ll still work. They won’t spark if dropped and they resist corrosion from salt water and damp conditions.

Tilt the head on these flashlights to point light where you need it in explosion-prone areas. Rated NEC Classes I and II, they’re safe to use where there are ignitable concentrations of flammable or combustible gases, vapors, liquids, and dust. Rated IP67, they seal out humidity and dripping, splashing, and falling liquids. They’re also dust-tight and will still work if temporarily submerged in water. These floodlights are tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, battery life, and impact resistance. For instance, they’ve been confirmed to still work if dropped from 6 feet.

Style A and B light up your footsteps with a second LED beneath the head that aims a flood beam downward. This LED can double as a task light—just tilt the head up to 90° and stand these flashlights on their end.

Style C are our brightest and most versatile option. For use as a task light, set them on their flat bottom or back. You can also hang them up on their hooks. Carry them around hands-free with the included strap. Those with a magnetic mount can be mounted to a wall or beam. The head still pivots 180° to adjust the direction of the light when they’re mounted with the magnet.

Flashlights with a spot beam have a bright center for long-distance illumination. Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Safely light up work in explosion-prone areas. Rated NEC Class I, these flashlights are safe to use in areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids.

IP67, IP07 and IP08 rated flashlights will still work after being temporarily submerged in water. IP67 rated lights are also sealed against dust.

Styles A-H are intrinsically safe. They cannot cause an explosion, so they're a better choice where hazardous material is present in normal operating conditions.

Style A have a second LED on the body that aims a flood beam downward to light up your footsteps. This LED can double as a task light—just stand these flashlights on their end or hang them up. They’ll also stick to metal surfaces with a magnet on the bottom and on the clip.

Flashlights with a flood beam cast a uniform spread of light that’s good for close-up tasks and inspection work.

Small enough to fit in your shirt pocket, these penlights safely light up work in explosion-prone areas. They’re intrinsically safe, meaning they cannot ignite an explosion. They’re also rated for areas with ignitable concentrations of flammable or combustible gases, vapors, and liquids. Ideal for close-up tasks and inspection work, their flood beam creates an even spread of light. Use the momentary light setting when you need light for brief periods—the light only turns on when you hold down the button. All have a nonslip grip so you don’t drop them.

These penlights have been tested against ANSI/PLATO FL 1 standards to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.

IP04-rated penlights are sealed to keep out dripping, splashing, and falling liquids, as well as humidity.

IP07-rated penlights can be temporarily submerged, so they’ll keep working if you drop them in water. They’re intrinsically safe for a broader range of hazardous locations than IP04-rated penlights. Use them in areas with ignitable concentrations of combustible dust, fibers, and other particles.

Hazardous location environmental ratings indicate where manufacturers have included safety features in products to facilitate their safe use in hazardous environments. Before selecting a product for a hazardous location, ensure it is rated for your environment.

Shine light into hard-to-reach spaces in extreme environments like oil refineries or chemical plants. These flashlights are intrinsically safe, so they won’t spark. They meet NEC standards to reduce the risk of explosions. Make sure they match the hazardous environmental rating of your facility—they’re rated NEC Class I, Division I Groups A, B, C, and D. They’re also rated IP04, so they’ll seal out humidity and liquid from all angles.

Shine them continuously or use the momentary light setting to shine the light only while holding down the button. You’ll keep a firm grip on these lights thanks to their knurled texture.

Flashlights that meet ANSI/Plato FL 1 are tested to confirm the accuracy of performance attributes such as beam distance, impact resistance, and battery life.