These face shields resist water and impact.
For use in light duty applications that don’t require much impact resistance, these plastic shields protect your eyes, nose, and mouth from dust, liquids, sneeze and cough particles, and other debris.
The scratch-resistant coating on these face shields extends the lens life.
The lens on these face shields is coated for an added level of protection against most chemicals.
The coating on these face shields reflects radiant heat to keep your face cooler.
The snug-fitting goggles attached to this face shield provide added protection from dust and liquids.
Eyeglass frames make these face shields easy and comfortable to wear for extended periods of time, even in hot conditions.
Attach these to the brim of cap-style hard hats to provide full-face protection.
Wear these over your prescription eyeglasses. To fully protect your eyes against flying dust and debris, safety goggles provide a complete seal. The adjustable headband prevents them from shifting or falling off.
To fully protect your eyes against flying debris, safety goggles provide a complete seal. The adjustable headband prevents them from shifting or falling off.
You can wear these goggles with a half-face respirator. To fully protect your eyes against flying dust and debris, safety goggles provide a complete seal. The adjustable headband prevents them from shifting or falling off.
Extend your peripheral vision with an extra-wide lens. To fully protect your eyes against flying dust and debris, safety goggles provide a complete seal. The adjustable headband prevents them from shifting or falling off.
Store safety glasses close at hand. Cases have a pocket clip, belt loop, or snap hook for convenient attachment.
For full-face protection while welding, select one of these shields.
Hold these lightweight face shields up to your face for quick inspection of welding activity.
Wear these goggles over your prescription eyeglasses. Designed for continuous-use welding, they protect your eyes from harmful infrared light.
Designed for continuous-use welding, these goggles protect your eyes from harmful infrared light.
Providing greater safety while welding than face shields, these helmets have an outer filter lens cover for protection from scratches and weld spatter.
The lens on these helmets automatically switches from light to dark the instant you start welding.
Protect your head and neck from extreme heat and splashes.
Provide protection from low-level arc flash hazards when a full hood is not necessary.
These hoods meet NFPA 70E standards for protection against electrical arc flashes for personal protection equipment (PPE) category 4.
For protection from low-level arc flash hazards, these kits include several of the necessary safety items in a storage bag.
Add a layer of warmth to your hard hat.
Keep your head and neck warm.
These face masks are made of an aramid blend that meets NFPA 70E for protection against electrical arc flashes while keeping your head and neck warm.
Hats are soft acrylic to keep you warm.
These hats are made of an aramid blend that meets NFPA 70E for protection against electrical arc flashes while keeping you warm.
These earmuffs wrap behind the head to shield ears from the cold and wind.
Stretch these form-fitting guards over hard hats to provide warmth and protection from the wind.
Also known as painters' spray socks, these breathable face masks are often used to protect against paint and dust.
These beanies are designed for a snug fit and provide good breathability.
Keep sun and sweat out of your eyes with these breathable, washable caps.
Wear these breathable hoods to keep cool while protecting against dirt and grime.
Keep your hair out of the way to prevent stray hairs from contaminating food.
Minimizing facial hair contamination, these beard covers are often used in food-processing and pharmaceutical plants.
Swap these covers out after every use to keep shared earmuffs, headsets, and headphones germ-free without sterilizing them.
Also known as bouffants, these hats and hairnets keep hair contained to reduce contamination.
These hoods prevent pollutants, such as dust particles and microbes, from contaminating a space.
Wear these fluorescent hats to stand out in low-visibility areas and high-risk jobsites, such as vehicle roadways and construction sites.
These sturdy hats are made of PVC-coated polyester to resist tears and mildew.
These face masks are double-layered to protect your head from radiant heat, flames, and welding sparks.
Protect your head from electrical arc flashes. These face masks won’t melt or drip when exposed to intermittent flames.
Soft and absorbent, these headbands keep perspiration out of your eyes.
Soak these bandanas before wearing them—they’ll cool you off as the water evaporates.
Keep sunlight off of your skin and sweat out of your eyes
These pads are filled with water-absorbent cooling crystals to keep you cool all day.
Keep your hair out of the way.
Protect your neck and face from harmful UV rays when wearing a hard hat.
Protect your head from minor bumps and scrapes. Attach a lens to protect against dust and spray.
Protect your head from minor bumps and scrapes.
Convert a baseball cap into a bump cap to protect your head from minor bumps and scrapes.
Made from a material similar to that used in firefighters' helmets.
For protection from more than just falling objects, these hard hats are rated ANSI/ISEA Z89.1, Type II to deflect both top and off-center blows to the head.
Hold your hard hat securely on your head with these chin straps.
Protect the top of your head from falling objects.
The fully retractable face shield provides protection against dust and spray and fits over prescription glasses.
These hard hats give all-in-one head, face, and ear protection. Lift the face shield and earmuffs when not in use.
Keep hard hats close at hand but out of the way.
When connected to an air pump, respirators provide a continuous supply of clean air. They have a chemical-resistant Tychem 2000 hood that protects against light liquid splashes.
Good for use around abrasive blasters and paint sprayers, these respirators are made of high-density materials that protect against rough airborne particles.
These respirators have a chemical-resistant Tychem 2000 hood that protects against light liquid splashes.
Good for use around abrasive blasters and painters, these respirators are made of high-density materials that protect against rough airborne particles.
These mobile respirators filter contaminants to deliver breathable air without the need for an air line connection. The pump sits on your back to allow unrestricted movement, so these respirators are often used in welding, painting, and pharmaceutical applications.
Push the button to hear conversation, announcements, and other sounds without taking off your earmuffs.
Earmuffs should be worn with the specified fit to offer proper protection and noise reduction.
Fold these earmuffs for compact storage that’s less likely to damage them. Earmuffs should be worn over the head to offer proper protection and noise reduction.
Stay connected while protecting your ears in noisy locations. Listen to music or make phone calls using a Bluetooth-enabled smartphone up to 30 feet away.
Snap these earmuffs on and off your slotted hard hat.
Keep your hands free by wearing a flashlight on your head.
Safe for use in environments where hazardous material is present.
Rated IP07, these headlamps withstand temporary submersion in a maximum of one meter of water for up to 30 minutes.
Turn a mini flashlight into a headlamp with these straps.
Clip these lights to the brim of a hat.
Clip these little flashlights to any surface up to 1/2” thick and keep your hands free for work. They're rated for use in environments where hazardous material is present.
Attach mini and full-size flashlights to a hard hat and keep your hands free to work.
Attach these labels to hard hats to provide safety reminders or to identify first-aid personnel.
Attach to your hard hat to prevent accidental drops.