Noncontact Wrap-Around Heaters for Pails and Drums
To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them. They provide uniform heat to 80% of the container. An adjustable thermostat automatically turns the heater on when the temperature drops below your set temperature and off when it rises above your set temperature. Adjust the set temperature with the dial. Do not use these heaters with flammable materials or in hazardous areas.
Heaters for 5-gallon containers do not open; set containers in from the top.
Heaters for 55-gallon containers close around containers. They are mounted on casters.
| For Container Dia. | O'all Ht. | Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | OD | Max. Heat Output, °F | NEMA Style | Cord Lg., ft. | For Surface Material | Housing Material | Insulation Material | Each | |
For 5-Gallon Containers | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
60° to 250° F Temp. Control Range | |||||||||||||||
| 12" | 13" | 1,350 | 81 | 120V AC | Single | 12 | 22" | 250° | 5-15 | 8 | Metal | Steel | Fiberglass | 0000000 | 000000000 |
100° to 550° F Temp. Control Range | |||||||||||||||
| 12" | 13" | 1,350 | 81 | 120V AC | Single | 12 | 22" | 550° | 5-15 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
For 55-Gallon Containers | |||||||||||||||
60° to 250° F Temp. Control Range | |||||||||||||||
| 23 3/4" | 30 1/2" | 1,500 | 92 | 120V AC | Single | 15 | 35" | 250° | L5-15 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
| 23 3/4" | 30 1/2" | 4,400 | 270 | 240V AC | Three | 12 | 35" | 250° | L15-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
| 23 3/4" | 30 1/2" | 4,400 | 270 | 480V AC | Three | 6 | 35" | 250° | L16-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
| 23 3/4" | 30 1/2" | 4,400 | 337 | 240V AC | Single | 20 | 35" | 250° | L6-20 | 8 | Metal | Steel | Fiberglass | 0000000 | 00000000 |
100° to 550° F Temp. Control Range | |||||||||||||||
| 23 3/4" | 30 1/2" | 4,400 | 270 | 240V AC | Three | 12 | 35" | 550° | L15-20 | 8 | Metal | Steel | Fiberglass | 000000 | 00000000 |
| 23 3/4" | 30 1/2" | 4,400 | 270 | 480V AC | Three | 6 | 35" | 550° | L16-20 | 8 | Metal | Steel | Fiberglass | 000000 | 00000000 |
| 23 3/4" | 30 1/2" | 4,400 | 337 | 240V AC | Single | 20 | 35" | 550° | L6-20 | 8 | Metal | Steel | Fiberglass | 000000 | 00000000 |
Heated Dollies for Drums
Keep drum contents warm and ready to roll. These dollies are often used for noncontact heating of thick, nonflammable, and nonhazardous materials such as wax. All have a time-cycle controller that constantly cycles on and off to keep your material warm. Turn the dial to adjust the ratio of on to off time. Since the controller has no built-in temperature sensor, it requires a thermometer (sold separately) to measure the temperature of the drum's contents to determine your desired heat setting.
For Container | Heating Element | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Wattage, W | Watt Density, W/sq. in. | Voltage | Electrical Phase | Current, A | Cap. | Dia. | Lg. | Wd. | Max. Heat Output, °F | Environment Temp. Range, °F | Cap., lbs. | NEMA Style | Cord Lg., ft. | For Surface Material | Each | |
| 1,750 | 11 | 120V AC | Single | 14.6 | 55 | 22 1/2" | 15 1/4" | 15 1/4" | 500° | -25° to 225° | 900 | 5-20 | 6 | Metal | 0000000 | 000000000 |
| 1,920 | 11.5 | 240V AC | Single | 8 | 55 | 22 1/2" | 15 1/4" | 15 1/4" | 500° | -25° to 225° | 900 | 6-15 | 6 | Metal | 0000000 | 00000000 |