Form these flexible heaters into any shape to mount them through brackets, collars, and holes. They are also known as tubular heaters.

The thermostat automatically turns these heaters on when the temperature drops below 38° F and turns them off when the temperature reaches 45° F.

Wrap the flexible heating element around small-diameter pipes and tubes or pack it into tight spaces.

When the ambient temperature changes, these heaters automatically adjust the heat output along the length of their cable. Also known as self-regulating heat cable, they don’t require a separate temperature switch or controller.

Keep the liquid inside your hose from freezing, maintain your liquid’s viscosity, and prevent condensation in chilly environments.

For demanding applications such as hot-melt transfer pipes, these heaters have a maximum heat output of 1400° F.

Heat water through direct contact in sanitary areas such as food, cosmetic, and pharmaceutical plants.

Sized to fit drums, these heaters have a bracket to hook on the side of drums and in bung openings.

Form these heaters into any shape and install them through container walls with the attached bulkhead fittings.

These heaters install through threaded container openings or pipe couplings.

Nonstandard-size containers are no problem—use the hook-and-loop closure to adjust these heaters to fit a range of diameters.

Keep gas flowing even when the temperature drops—also known as heat blankets, these heaters wrap around propane tanks to safely warm liquefied gas so it can vaporize.

To prevent hot spots that can damage heat-sensitive materials such as adhesives, sealants, and food, these heaters warm the air around containers without touching them.

Also known as heat blankets, these heaters completely surround containers for fast heating and increased heat retention in unheated and drafty areas.

Dozens of fins and coolant tubes quickly dissipate excess heat.

Turn your pipe or tube into a heat sink.

Shaped like a large flashlight, use these wands to loosen stuck nuts, heat bearings, and repair dents.

Create a circle of radiant heat to install heat-shrink tubing and bend plastic tubing. Use these wands in applications where blowing air is not practical, such as in clean rooms and other controlled environments.