Manufacturer Model Number Manufacturer Model Number |
|---|
|
|
Base Width Base Width |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Battery Chemistry Battery Chemistry |
|---|
|
Scribers with Base
Also known as surface gauges, use these to scribe lines, transfer measurements, or as height and depth gauges. They have a V-groove base that can be used on round or flat surfaces.
Gauge pins can be pushed down for use against the edge of a surface plate or T-slot for linear work.
Mounting Rod | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Tip Style | Scriber Lg. | Lg. | Dia. | Lg. | Wd. | Material | Adjustment Method | Manufacturer | Manufacturer Model Number | Each | |
With 2 Gauge Pins | |||||||||||
| 90° Angle | 8 1/2" | 18" | 3/8" | 3 3/4" | 3 3/8" | Cast Iron | Screw | Starrett | 57D | 000000 | 0000000 |
| Curved | 6" | 12" | 5/16" | 3" | 2 1/2" | Cast Iron | Screw | Starrett | 57B | 000000 | 000000 |
With 4 Gauge Pins | |||||||||||
| 90° Angle | 8 1/2" | 18" | 3/8" | 3 1/2" | 3 1/4" | Steel | Screw | Starrett | 257D | 000000 | 000000 |
| Curved | 6" | 12" | 5/16" | 2 7/8" | 2 3/8" | Steel | Screw | Starrett | 257B | 000000 | 000000 |
Mitutoyo Electronic Height Gauges
Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 7/16" | 6 5/16" | Yes | 570-312 | 0000000 | 0000000 |
| 0"-12" | 0 mm-300 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 3 9/16" | 5 5/16" | Yes | 192-630-10 | 0000000 | 00000000 |
| 0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-631-10 | 0000000 | 00000000 |
| 0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-313 | 0000000 | 000000 |
| 0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-632-10 | 0000000 | 00000000 |
| 0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-314 | 0000000 | 00000000 |
Mitutoyo Electronic Height Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking. Each gauge has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.
Measuring Range | Accuracy | Measuring Increments | Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 7/16" | 6 5/16" | Yes | 570-312 | 0000000 | 0000000 |
| 0"-12" | 0 mm-300 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 3 9/16" | 5 5/16" | Yes | 192-630-10 | 0000000 | 00000000 |
| 0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-631-10 | 0000000 | 00000000 |
| 0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-313 | 0000000 | 000000 |
| 0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-632-10 | 0000000 | 00000000 |
| 0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-314 | 0000000 | 00000000 |
Starrett Electronic Height Gauges
Take height measurements and set the attached scriber at a specific height for repeat marking. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Scale Measuring Increments | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4" | 6" | Yes | 3754-12/300 | 00000000 | 0000000 |
| 0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4 3/4" | 7 3/4" | Yes | 3754-24/600 | 00000000 | 00000000 |
| Replacement Battery (1/Pkg.) | 0000000 | Pkg. | 00000 |
Starrett Electronic Height Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They have a scriber that can be set at a specific height for repeat marking. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Inch | Metric | Inch | Metric | Inch | Metric | Scale Measuring Increments | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
| 0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4" | 6" | Yes | 3754-12/300 | 00000000 | 0000000 |
| 0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4 3/4" | 7 3/4" | Yes | 3754-24/600 | 00000000 | 00000000 |
| Replacement Battery (1/Pkg.) | 0000000 | Pkg. | 00000 |
Mitutoyo Dial Height Gauges
Read measurements on a dial or using the two mechanical analog counters (one counts up; the other counts down). Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking.
Base | ||||||||
|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Column Material | Wd. | Lg. | Manufacturer Model Number | Each | |
| 0"-12" | ±0.001" | 0.001" | Chrome-Plated Steel | 1 25/32" | 5 5/16" | 192-150 | 0000000 | 0000000 |
| 0"-18" | ±0.002" | 0.001" | Chrome-Plated Steel | 2 1/8" | 7 3/32" | 192-151 | 0000000 | 00000000 |
| 0"-24" | ±0.002" | 0.001" | Chrome-Plated Steel | 2 1/8" | 7 3/32" | 192-152 | 0000000 | 00000000 |
Economy Dial Height Gauges
In addition to the dial, two mechanical analog counters display measurements (one counts up; the other counts down). Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking. A zero-set button allows you to start measuring at any point.
Base | ||||||||
|---|---|---|---|---|---|---|---|---|
| Measuring Range | Accuracy | Measuring Increments | Column Material | Wd. | Lg. | Analog Counter Numeric Increments | Each | |
| 0"-12" | ±0.0015" | 0.001" | Chrome-Plated Steel | 3 5/16" | 5" | 0.1" | 00000000 | 0000000 |
| 0"-18" | ±0.002" | 0.001" | Chrome-Plated Steel | 3 15/16" | 5 15/16" | 0.1" | 00000000 | 000000 |
| 0"-24" | ±0.002" | 0.001" | Chrome-Plated Steel | 4 3/4" | 7 1/8" | 0.1" | 00000000 | 000000 |