Mount Type Mount Type |
---|
|
Base Length Base Length |
---|
Capacity Capacity |
---|
|
|
Height Height |
---|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Base Width Base Width |
---|
Material Material |
---|
|
For Manufacturer Model Number For ManufacturerModel Number |
---|
|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
Economy Weighted-Base Indicator Holders


Commonly used on workbenches, these stands have a heavy granite base for stability. They hold indicators in place for taking accurate readings.
Holder with fine-adjustment arm gives you more control over positioning.
Base | Upright Post | Arm | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | Surface Accuracy | Throat Dp. | Type | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Material | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
1/4" | ±0.0001" | 2 3/8" | Flat | 6" | 6" | 2" | 3/8"-16 | __ | Granite | 1 1/4" | 8" | Steel | 2 1/8" | Rigid | __ | 00000000 | 0000000 |
1/4" | ±0.0005" | 2 3/8" | Flat | 6" | 6" | 2" | M10 | 1.5 | Granite | 1" | 8" | Steel | 1 7/8" | Rigid | Fine-Adjustment Arm | 00000000 | 000000 |
Base | Upright Post | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Surface Accuracy | Throat Dp. | Type | Lg. | Wd. | Ht. | Thread Size | Material | Dia. | Ht. | Material | Lg. | Flexibility | Each | |
3/8" | ±0.0001" | 4 25/32" | Flat | 12" | 18" | 4" | 3/8"-16 | Granite | 1 1/4" | 12" | Stainless Steel | 4 3/16" | Rigid | 00000000 | 0000000 |
3/8" | ±0.0001" | 5 5/8" | Flat | 8" | 12" | 2" | 3/8"-16 | Granite | 1 1/4" | 12" | Stainless Steel | 5 3/8" | Rigid | 00000000 | 000000 |
Weighted-Base Indicator Holders


A heavy cast iron base adds stability. These stands hold indicators in place for taking accurate readings. A fine-adjustment knob gives you precise control over the arm position.
Serrated anvils are often used when measuring oily parts—oil drips down into the serrations so the indicator has more direct contact with the part it’s measuring.
Anvils | Base | Upright Post | Arm | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Number | Face Dia. | Face Texture | Material | Throat Dp. | Lg. | Wd. | Ht. | Thread Size | Thread Pitch, mm | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
Stem Mount | ||||||||||||||||||
3/8", 8mm | 1 | 2" | Serrated | Steel | 2 1/2" | 5 3/4" | 3 1/2" | 1 1/2" | M10 | 1.5 | 1" | 8" | Steel | 3" | Rigid | Fine-Adjustment Arm | 0000000 | 0000000 |
3/8", 8mm | 2 | 2 3/8" | Serrated, Smooth | Steel | 2 3/4" | 5 3/4" | 3 1/2" | 1 1/2" | M10 | 1.5 | 1" | 14" | Steel | 3" | Rigid | Fine-Adjustment Arm | 0000000 | 000000 |
Precision Weighted-Base Indicator Holders with Calibration Certificate


These holders come with a calibration certificate traceable to NIST states that the granite base has passed a test for surface accuracy. The extremely tight flatness tolerances of the granite allow for nearly frictionless workpiece movement and provide an accurate reference plane for inspection work.
Holders with jointed arm have a fine-adjustment knob for precise positioning.
Base | Upright Post | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Stem Dia. | Surface Accuracy | Throat Dp. | Lg. | Wd. | Ht. | Thread Size | Material | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
3/8" | ±0.00005" | 1 3/4" | 6" | 6" | 2" | 1/2"-13 | Granite | 1 1/4" | 8" | Steel | 4 1/8" | Rigid | __ | 0000000 | 0000000 |
3/8" | ±0.0001" | 5" | 8" | 12" | 2" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
3/8" | ±0.0001" | 5" | 12" | 18" | 4" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
Base | Upright Post | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Mounting Lug Hole Dia. | Surface Accuracy | Throat Dp. | Lg. | Wd. | Ht. | Thread Size | Material | Dia. | Ht. | Material | Lg. | Flexibility | Features | Each | |
1/4" | ±0.00005" | 1 3/4" | 6" | 6" | 2" | 1/2"-13 | Granite | 1 1/4" | 8" | Steel | 4 1/8" | Rigid | __ | 0000000 | 0000000 |
1/4" | ±0.0001" | 5" | 8" | 12" | 2" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
1/4" | ±0.0001" | 5" | 12" | 18" | 4" | 1/2"-13 | Granite | 1 1/4" | 12" | Steel | 7 5/16" | Jointed | Fine-Adjustment Arm | 0000000 | 000000 |
Attachments for Lever-Style Variance Indicators
Attachments without dovetails require a swivel clamp (not included) to hold the indicator.
For technical drawings and 3-D models, click on a part number.

Upright Post | Bar | ||||||
---|---|---|---|---|---|---|---|
Overall Lg. | Ht. | Dia. | Lg. | Wd. | Ht. | Each | |
4" | 0.312" | 0.237" | 4" | 1/4" | 1/2" | 0000000 | 000000 |
Mitutoyo Electronic Height Gauges
Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.


Measuring Range | Accuracy | Measuring Increments | Base | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 7/16" | 6 5/16" | Yes | 570-312 | 0000000 | 0000000 |
0"-12" | 0 mm-300 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 3 9/16" | 5 5/16" | Yes | 192-630-10 | 0000000 | 00000000 |
0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-631-10 | 0000000 | 00000000 |
0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-313 | 0000000 | 000000 |
0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-632-10 | 0000000 | 00000000 |
0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-314 | 0000000 | 00000000 |
Mitutoyo Electronic Height Gauges with Calibration Certificate
These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking. Each gauge has zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point. SPC data output allows for connection to a computer or data processor.
USB data cable (sold separately) connects the gauge directly to your PC.
10-pin data cables (sold separately) connect the gauge to a Mitutoyo miniprocessor or multiplexer.
Wireless data transmitter and receiver (sold separately) allow you to transmit measurement data from the gauge to your PC without being tethered by a cable.


Measuring Range | Accuracy | Measuring Increments | Base | |||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 7/16" | 6 5/16" | Yes | 570-312 | 0000000 | 0000000 |
0"-12" | 0 mm-300 mm | ±0.001" | ±0.025 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 3 9/16" | 5 5/16" | Yes | 192-630-10 | 0000000 | 00000000 |
0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-631-10 | 0000000 | 00000000 |
0"-18" | 0 mm-450 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-313 | 0000000 | 00000000 |
0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 4 3/4" | 7 1/8" | Yes | 192-632-10 | 0000000 | 00000000 |
0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | Chrome-Plated Steel | 5 5/8" | 7 1/8" | Yes | 570-314 | 0000000 | 00000000 |
Starrett Electronic Height Gauges

Take height measurements and set the attached scriber at a specific height for repeat marking. These gauges have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Scale Measuring Increments | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4" | 6" | Yes | 3754-12/300 | 00000000 | 0000000 |
0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4 3/4" | 7 3/4" | Yes | 3754-24/600 | 00000000 | 00000000 |
Replacement Battery (1/Pkg.) | 0000000 | Pkg. | 00000 |
Starrett Electronic Height Gauges with Calibration Certificate

These gauges come with a calibration certificate traceable to NIST that states they've passed a test for accuracy. They have a scriber that can be set at a specific height for repeat marking. All have zero-position memory, also known as absolute (ABS) positioning, which retains the measuring position when the gauge is turned off. A zero-set button lets you start measuring at any point.
Measuring Range | Accuracy | Measuring Increments | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inch | Metric | Inch | Metric | Inch | Metric | Scale Measuring Increments | Column Material | Wd. | Lg. | Batteries Included | Manufacturer Model Number | Each | |
0"-12" | 0 mm-300 mm | ±0.0015" | ±0.040 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4" | 6" | Yes | 3754-12/300 | 00000000 | 0000000 |
0"-24" | 0 mm-600 mm | ±0.002" | ±0.050 mm | 0.0005" | 0.01 mm | 0.1" | Steel | 4 3/4" | 7 3/4" | Yes | 3754-24/600 | 00000000 | 00000000 |
Replacement Battery (1/Pkg.) | 0000000 | Pkg. | 00000 |
Economy Dial Height Gauges

In addition to the dial, two mechanical analog counters display measurements (one counts up; the other counts down). Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking. A zero-set button allows you to start measuring at any point.
Base | ||||||||
---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Column Material | Wd. | Lg. | Analog Counter Numeric Increments | Each | |
0"-12" | ±0.0015" | 0.001" | Chrome-Plated Steel | 3 5/16" | 5" | 0.1" | 00000000 | 0000000 |
0"-18" | ±0.002" | 0.001" | Chrome-Plated Steel | 3 15/16" | 5 15/16" | 0.1" | 00000000 | 000000 |
0"-24" | ±0.002" | 0.001" | Chrome-Plated Steel | 4 3/4" | 7 1/8" | 0.1" | 00000000 | 000000 |
Mitutoyo Dial Height Gauges
Read measurements on a dial or using the two mechanical analog counters (one counts up; the other counts down). Use the hand wheel to adjust height up and down the column, and set the attached scriber at a specific height for repeat marking.

Base | ||||||||
---|---|---|---|---|---|---|---|---|
Measuring Range | Accuracy | Measuring Increments | Column Material | Wd. | Lg. | Manufacturer Model Number | Each | |
0"-12" | ±0.001" | 0.001" | Chrome-Plated Steel | 1 25/32" | 5 5/16" | 192-150 | 0000000 | 0000000 |
0"-18" | ±0.002" | 0.001" | Chrome-Plated Steel | 2 1/8" | 7 3/32" | 192-151 | 0000000 | 00000000 |
0"-24" | ±0.002" | 0.001" | Chrome-Plated Steel | 2 1/8" | 7 3/32" | 192-152 | 0000000 | 00000000 |
Scribers for Mitutoyo Height Gauges

Lg. | Wd. | Bar Ht. | Overall Ht. | Manufacturer Model Number | For Manufacturer Model Number | Each | |
2 3/8" | 1/4" | 1/2" | 1 3/16" | 900258 | 192-150, 192-151, 192-152, 192-630-10, 192-631-10, 192-632-10, 570-312, 570-313, 570-314 | 0000000 | 000000 |
Scriber Clamps for Mitutoyo Height Gauges

Manufacturer Model Number | For Manufacturer Model Number | Each | |
901385 | 192-630-10, 192-631-10, 192-632-10, 570-312, 570-313, 570-314 | 0000000 | 000000 |
Build-Your-Own Tripod-Style Support Stands
Create a stand with interchangeable attachments for versatility.
V-Style and wheel supports slide onto the internal tube of stands. For roller supports, remove the stand's internal tube and mount them directly to the stand to prevent instability.
Attachments slide onto the arms of the V-style support.



Roller | Arm | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Stand | O'all Ht. with Stand | For OD | Material | Cap., lbs. | Between Frame Wd. | Dia. | Material | Lg. | Wd. | Wheel Dia. | No.of Wheels Included | Includes | Each | |
Roller | ||||||||||||||
A C | 25"-33" 29"-43" | 1/8"-10" | Steel | 2,000 | 10" | 2" | Steel | __ | __ | __ | __ | __ | 00000000 | 0000000 |
B D | 25"-33" 29"-43" | 1/8"-10" | Steel | 2,000 | 10" | 2" | Steel | __ | __ | __ | __ | __ | 0000000 | 000000 |
V-Style | ||||||||||||||
A; C B; D | 21"-36" 28"-49" | 1/8"-36" | Steel | 2,000 | __ | __ | __ | 4" | 3" | __ | __ | __ | 0000000 | 00000 |
A; C B; D | 21"-36" 28"-49" | 1/8"-36" | Steel | 2,000 | __ | __ | __ | 4" | 3" | __ | __ | V-Style Attachment | 00000000 | 000000 |
Wheel | ||||||||||||||
A; C B; D | 21"-36" 28"-49" | 1 1/4"-24" | Stainless Steel | 2,000 | __ | __ | __ | __ | __ | 4" | 2 | __ | 0000000 | 000000 |
A; C B; D | 21"-36" 28"-49" | 1 1/4"-24" | Aluminum | 2,000 | __ | __ | __ | __ | __ | 4" | 2 | __ | 0000000 | 00000 |
A; C B; D | 21"-36" 28"-49" | 1 1/2"-24" | Phenolic Plastic | 1,000 | __ | __ | __ | __ | __ | 4" | 2 | __ | 00000000 | 000000 |
Build-Your-Own Support Stands



Transfer Support
Shown Together
Create a stand with interchangeable attachments for versatility.



Roller-Top V-Style Support Stands

Cradle pipe and bar stock while machining. V-shape rollers provide smooth material feeding for long, thin objects.
Roller | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Max. OD | Ht. | Cap., lbs. | Dia. | Material | Lg. | Wd. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
4" | 25 3/4"-38" | 400 | 2" | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | 0000000 | 0000000 |
Large-Diameter V-Style Support Stands

With long, wide angled arms, this stand supports pipe up to 36" diameter. Leveling feet provide stability.
Optional V-wheels mount into the arms to make rotating material easy.

Arm | Base | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
For OD | Ht. | Cap., lbs. | Lg. | Wd. | Lg. | Wd. | Material | Features | Each | |
4"-36" | 27"-39" | 4,500 | 12" | 4 5/8" | 31" | 31" | Steel | Leveling Feet | 0000000 | 0000000 |

Wheel | |||||
---|---|---|---|---|---|
Dia. | Material | Cap., lbs. | Pkg. Qty. | Pkg. | |
4" | Aluminum | 4,500 | 4 | 0000000 | 000000 |

Wheel | Stem | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
Dia. | Wd. | Mount Ht. | Cap., lbs. | Dia. | Lg. | Wheel/Tread Material | Caster Type | Pkg. Qty. | Pkg. | |
8" | 2" | 4 1/8" | 4,500 | 1 3/8" | 4 1/8" | Polypropylene Plastic | Swivel with Brake | 5 | 0000000 | 0000000 |
Tabletop Large-Diameter Support Stands

Place stands on a work surface to position pipe while machining. All position pipe parallel to the frame.
V-groove stands also allow pipe to be perpendicular to the frame.
Dia. | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For OD | Ht. | Cap., lbs. | Wheel | Axle | No. of Wheels Included | Lg. | Wd. | Material | Features | Each | |
3"-30" | 6 1/4" | 2,500 | 4 1/2" | 1 1/2" | 4 | 17 1/2" | 6 1/2" | Steel | V-Groove | 0000000 | 0000000 |
Roller-Top Support Stands






Rollers support and help guide material into machinery.
Roller | Base | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Between Frame Wd. | Ht. | Cap., lbs. | Dia. | Spacing | Material | Lg. | Wd. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Features | Each | ||
A | 13" | 28"-42" | 250 | 1 7/8" | __ | Steel | 18" | 15 1/2" | Steel | __ | __ | Folding Legs, Nonskid Feet | 0000000 | 0000000 |
B | 16" | 23"-39" | 300 | 2" | __ | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | __ | 000000 | 000000 |
B | 16" | 28"-50" | 300 | 2" | __ | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | __ | 000000 | 000000 |
C | 16" | 22"-32" | 500 | 1.9" | __ | Galvanized Steel | 17" | 16" | Steel | __ | __ | Leveling Feet | 0000000 | 000000 |
C | 16" | 28"-45 1/2" | 500 | 1.9" | __ | Galvanized Steel | 17" | 16" | Steel | __ | __ | Leveling Feet | 0000000 | 000000 |
D | 13" | 26 1/2"-43 1/2" | 500 | 1 3/8" | 4" | Galvanized Steel | 18" | 15" | Steel | __ | __ | Leveling Feet | 0000000 | 000000 |
E | 13" | 26 1/2"-43 1/2" | 500 | 1 3/8" | 4" | Galvanized Steel | 66" | 15" | Steel | __ | __ | Folding Legs, Leveling Feet | 0000000 | 000000 |
Ball-Transfer-Top Support Stands

Ball transfers allow movement in any direction so you can turn material without lifting it. Feet have mounting holes for floor mounting.
Ball | Base | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Top Rail Wd. | Ht. | Cap., lbs. | Dia. | Spacing | Material | Lg. | Wd. | Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
18" | 28"-48" | 200 | 1" | 2" | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | 000000 | 0000000 |
Threaded Mounting Plates for Any-Which Way Positioning Arms

Add a mounting surface to an any-which-way positioning arm.
For technical drawings and 3-D models, click on a part number.
Threaded Mount. Holes | Unthreaded Mount. Holes | |||||||||
---|---|---|---|---|---|---|---|---|---|---|
No. of | Thread Size | No. of | Dia. | Center-to-Center | Mount. Hole Style | Mount. Fasteners Included | Material | Appearance | Each | |
4" Lg. × 4" Wd. × 0.38" Thick. | ||||||||||
1 | 1/4"-20 | 4 | 0.225" | 1 1/2"; 1 3/16" | Straight | No | Aluminum | Dull | 0000000 | 000000 |
Flexible-Leg Positioning Stands

Bend and wrap the legs around almost anything while keeping a level mounting surface. Rubber rings around each section prevent slipping. These stands can also be used like a traditional tripod.
Max. Load Capacity, lbs. | Ht. | Head Dia. | Leg Dia. | Material | Color | Mount Type | Thread Size | Each | |
1 | 4"-10 1/2" | 1 3/4" | 1" | Plastic | Black | Threaded Stud | 1/4"-20 | 0000000 | 000000 |
Adjustable-Height Positioning Stands
11-lb. capacity stands have an open head for use with optical and laser plumb instruments. The pointed feet provide stability on grass, gravel, and dirt.
150-lb. capacity stands can be staked through the holes in the footplates.


Max. Load Capacity, lbs. | Ht. | Head Dia. | Material | Mount Type | No. of Mounting Holes (Thread Size) | Mounting Fasteners Included | Features | Each | |
11 | 42"-65" | 5" | Aluminum | Threaded Hole | 1 (5/8"-11) | No | Open Head, Pointed Feet with Rubber Pads | 0000000 | 000000 |
150 | 33 1/2"-70" | 6" | Powder-Coated Aluminum | Threaded Hole | 4 (1/4"-20),12 (5/16"-18) | Yes | 4" Dia. Self-Leveling Footplates with 5/8" Hole | 000000 | 00000000 |
Any-Angle Adjustable-Height Positioning Stands

The head rotates 360° and tilts up and down.
Head | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Load Capacity, lbs. | Ht. | Tilt Range of Motion | Lg. | Wd. | Material | Mount Type | Thread Size | Features | Includes | Each | |
9 | 11"-58" | 165° | 2 1/2" | 2 1/4" | Anodized Aluminum | Threaded Stud | 1/4"-20 | Quick-Release Attachment Plate | Storage Case | 000000 | 0000000 |
Scribers with Base

Also known as surface gauges, use these to scribe lines, transfer measurements, or as height and depth gauges. They have a V-groove base that can be used on round or flat surfaces.
Gauge pins can be pushed down for use against the edge of a surface plate or T-slot for linear work.
Mounting Rod | Base | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Tip Style | Scriber Lg. | Lg. | Dia. | Lg. | Wd. | Material | Adjustment Method | Manufacturer | Manufacturer Model Number | Each | |
With 2 Gauge Pins | |||||||||||
90° Angle | 8 1/2" | 18" | 3/8" | 3 3/4" | 3 3/8" | Cast Iron | Screw | Starrett | 57D | 000000 | 0000000 |
Curved | 6" | 12" | 5/16" | 3" | 2 1/2" | Cast Iron | Screw | Starrett | 57B | 000000 | 000000 |
With 4 Gauge Pins | |||||||||||
90° Angle | 8 1/2" | 18" | 3/8" | 3 1/2" | 3 1/4" | Steel | Screw | Starrett | 257D | 000000 | 000000 |
Curved | 6" | 12" | 5/16" | 2 7/8" | 2 3/8" | Steel | Screw | Starrett | 257B | 000000 | 000000 |