Filter Efficiency Filter Efficiency |
---|
|
For Manufacturer For Manufacturer |
---|
|
|
Component Component |
---|
|
For Vacuum Capacity For Vacuum Capacity |
---|
|
Manufacturer Equivalent Number ManufacturerEquivalent Number |
---|
|
|
For Vacuum Type For Vacuum Type |
---|
|
Maximum Flow Rate Maximum Flow Rate |
---|
Connection Style Connection Style |
---|
![]() |
Threaded |
![]() |
Quick Clamp |
![]() |
Claw Clamp |
Overall Height Overall Height |
---|
|
|
|
Maximum Vacuum Maximum Vacuum |
---|
|
More
Shop-Vac® bags and filters can be used with Dayton brand wet/dry vacuums.
HEPA filters virtually eliminate exhaust dust.
Component | Manufacturer Equivalent No. | Filter Efficiency Rating | Filter Efficiency | Manufacturer Model Number | For Pickup Type | For Vacuum Cap., gal. | For Vacuum Type | Pkg. Qty. | Pkg. | |
Bissell | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Filter | 3091 | HEPA | 99.97% @ 0.3 microns | 8, 14 | __ | __ | Upright | 1 | 0000000 | 000000 |
Filter | 32076 | HEPA | 99.97% @ 0.3 microns | 7, 9, 16 | __ | __ | Upright | 1 | 0000000 | 00000 |
Dirt Devil | ||||||||||
Cartridge Filter | 3JC0280000 | HEPA | 99.97% @ 0.3 microns | F1 | __ | __ | Upright | 1 | 0000000 | 00000 |
Cartridge Filter | 3SFA11500X | HEPA | 99.97% @ 0.3 microns | F2 | __ | __ | Upright | 1 | 0000000 | 00000 |
Hoover | ||||||||||
Filter | 40140201 | __ | __ | __ | __ | __ | Upright, Twin Chamber | 1 | 0000000 | 00000 |
Nilfisk | ||||||||||
Cartridge Filter | __ | HEPA | 99.97% @ 0.3 microns | __ | __ | 5, 8 | __ | 1 | 00000000 | 000000 |
Nortech | ||||||||||
Cartridge Filter | N612H | HEPA | 99.97% @ 0.3 microns | __ | __ | 15, 20 | __ | 1 | 0000000 | 000000 |
Cartridge Filter | N635H | HEPA | 99.97% @ 0.3 microns | __ | __ | 30, 55 | __ | 1 | 0000000 | 000000 |
Ridgid | ||||||||||
Cartridge Filter | __ | HEPA | 99.97% @ 0.3 microns | __ | __ | 6 and up | __ | 1 | 0000000 | 00000 |
Sears Craftsman | ||||||||||
Cartridge Filter | 9-17912 | HEPA | 99.97% @ 0.3 microns | __ | __ | 6 and up | __ | 1 | 0000000 | 00000 |
Shop-Vac | ||||||||||
Cartridge Filter | 903-40 | HEPA | 99.97% @ 0.3 microns | __ | Wet/Dry | 5 and up | __ | 1 | 0000000 | 00000 |
Long-Life Cartridge Filter | 903-80 | HEPA | 99.97% @ 0.3 microns | __ | Wet/Dry | 5 and up | __ | 1 | 0000000 | 00000 |
Typically used on vacuum pumps, these filters ensure that clean air is going in and coming out of your system. Install them on the inlet to stop dust from entering your equipment.
Replacement elements are sold separately. HEPA elements have greater efficiency for high-purity applications, but they reduce the maximum flow rate of your filter. Polyester and fiberglass are more durable than paper.
For technical drawings and 3-D models, click on a part number.
O'all | Element | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Thread Type | Gender | Max. Flow Rate | Max. Vacuum | Max. Temp., °F | Ht. | Dia. | Removes Particle Size Down To, microns | Filter Efficiency | Ht. | ID | OD | Material | Each | ||
B | 2 | NPT | Female | 175 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 13" | 9" | 5 | Not Rated | 8 3/4" | 3 1/2" | 5 7/8" | Polyester Plastic | 0000000 | 0000000 |
B | 4 | NPT | Female | 520 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 18 7/8" | 13 1/2" | 5 | Not Rated | 9 5/8" | 4 3/4" | 7 7/8" | Polyester Plastic | 0000000 | 000000 |
C | 3/8 | NPT | Female | 18 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 3 5/8" | 3 3/4" | 5 | 99% | 2 11/16" | 1 1/2" | 2 1/2" | Polyester Plastic | 0000000 | 00000 |
C | 1/2 | NPT | Female | 18 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 3 5/8" | 3 3/4" | 5 | 99% | 2 11/16" | 1 1/2" | 2 1/2" | Polyester Plastic | 0000000 | 00000 |
C | 1/2 | NPT | Female | 20 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 4 1/8" | 5 7/8" | 5 | 99% | 2 3/4" | 2 3/8" | 3 7/8" | Polyester Plastic | 0000000 | 00000 |
C | 3/4 | NPT | Female | 24 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 3 5/8" | 3 3/4" | 5 | 99% | 2 11/16" | 1 1/2" | 2 1/2" | Polyester Plastic | 0000000 | 00000 |
C | 3/4 | NPT | Female | 25 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 4 1/8" | 5 7/8" | 5 | 99% | 2 3/4" | 2 3/8" | 3 7/8" | Polyester Plastic | 0000000 | 00000 |
C | 1 | NPT | Female | 40 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 6 3/4" | 7 5/16" | 5 | 99% | 4 3/4" | 2 9/16" | 5" | Polyester Plastic | 0000000 | 000000 |
C | 1 1/4 | NPT | Female | 60 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 6 3/4" | 7 5/16" | 5 | 99% | 4 3/4" | 2 9/16" | 5" | Polyester Plastic | 0000000 | 000000 |
C | 1 1/2 | NPT | Female | 80 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 6 3/4" | 7 5/16" | 5 | 99% | 4 3/4" | 2 9/16" | 5" | Polyester Plastic | 0000000 | 000000 |
C | 2 | NPT | Female | 175 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 10" | 8 3/4" | 5 | 99% | 8 3/4" | 3 1/2" | 5 7/8" | Polyester Plastic | 0000000 | 000000 |
C | 2 1/2 | NPT | Female | 210 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 10 1/2" | 8 3/4" | 5 | 99% | 8 3/4" | 3 1/2" | 5 7/8" | Polyester Plastic | 0000000 | 000000 |
C | 3 | NPT | Female | 300 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 15 3/4" | 13 1/4" | 5 | 99% | 10" | 4 7/8" | 9 1/4" | Polyester Plastic | 0000000 | 000000 |
D | 3 | NPT | Male | 300 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 27 1/4" | 14" | 5 | 99% | 9 5/8" | 4 3/4" | 7 7/8" | Polyester Plastic | 0000000 | 000000 |
D | 4 | NPT | Male | 520 scfm @ 14.7 psi | 29.9 in. of Hg | 220° | 27 1/4" | 14" | 5 | 99% | 9 5/8" | 4 3/4" | 7 7/8" | Polyester Plastic | 0000000 | 000000 |
Replacement Clips for Styles B and C | 0000000 | Each | 00000 |
Ht. | ID | OD | Removes Particle Size Down To, microns | Filter Efficiency | Each | |
Paper | ||||||
---|---|---|---|---|---|---|
2 11/16" | 1 1/2" | 2 1/2" | 2 | 99% | 0000000 | 00000 |
2 3/4" | 2 3/8" | 3 7/8" | 2 | 99% | 0000000 | 0000 |
4 3/4" | 2 9/16" | 5" | 2 | 99% | 0000000 | 00000 |
8 3/4" | 3 1/2" | 5 7/8" | 2 | 99% | 0000000 | 00000 |
9 5/8" | 4 3/4" | 7 7/8" | 2 | 99% | 0000000 | 00000 |
10" | 4 7/8" | 9 1/4" | 2 | 99% | 0000000 | 00000 |
Polyester Plastic | ||||||
2 11/16" | 1 1/2" | 2 1/2" | 5 | 99% | 0000000 | 00000 |
2 3/4" | 2 3/8" | 3 7/8" | 5 | 99% | 0000000 | 00000 |
4 3/4" | 2 9/16" | 5" | 5 | 99% | 0000000 | 00000 |
8 3/4" | 3 1/2" | 5 7/8" | 5 | 99% | 0000000 | 00000 |
9 5/8" | 4 3/4" | 7 7/8" | 5 | 99% | 0000000 | 00000 |
10" | 4 7/8" | 9 1/4" | 5 | 99% | 0000000 | 000000 |
HEPA Polyester Plastic and Fiberglass | ||||||
2 11/16" | 1 1/2" | 2 1/2" | 0.3 | 99.9% | 0000000 | 00000 |
2 3/4" | 2 3/8" | 3 7/8" | 0.3 | 99.9% | 0000000 | 00000 |
4 3/4" | 2 9/16" | 5" | 0.3 | 99.9% | 0000000 | 00000 |
8 3/4" | 3 1/2" | 5 7/8" | 0.3 | 99.9% | 0000000 | 000000 |
9 5/8" | 4 3/4" | 7 7/8" | 0.3 | 99.9% | 0000000 | 000000 |
10" | 4 7/8" | 9 1/4" | 0.3 | 99.9% | 0000000 | 000000 |
Install these filters between your high-vacuum chamber and the inlet of your pump to remove dust, water vapor, and other contaminants from the system and protect the pump. Commonly used in vacuum-furnace and coating applications, they have a polyester filter element that traps particles as small as 5 microns. All filters have been helium-leak tested to ensure quality. When the filter element becomes clogged, you can replace it.
Quick-clamp connections are also known as KF, QF, and NW connections; they require a ring and quick clamp (sold separately) to complete the connection.
Claw-clamp connections are also known as ISO-K connections; use a ring and multiple claw clamps (sold separately) to secure. Double-claw clamps attach to the grooves on the fittings. Single-claw clamps have a clamp on one end and an exposed bolt on the other. Thread the bolt-end directly into the body of pumps, valves, or other high-vacuum components.
For technical drawings and 3-D models, click on a part number.
Air-Intake Filters | |||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
O'all | Element | Replacement Elements | |||||||||||||
Trade Number | Flange OD | For Tube OD | Max. Flow Rate | Max. Vacuum | Temp. Range, °F | Ht. | Dia. | Removes Particle Size Down To, microns | Filter Efficiency | Ht. | OD | Each | Each | ||
Quick-Clamp (ISO-KF) Connection—Polyester Plastic Element | |||||||||||||||
16 | 1.18" | 3/4" | 23 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 3 7/8" | 3 3/4" | 5 | 99% | 2 11/16" | 2 1/2" | 0000000 | 0000000 | 0000000 | 000000 |
25 | 1.57" | 1" | 35 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 4 3/8" | 5 3/4" | 5 | 99% | 2 3/4" | 3 7/8" | 0000000 | 000000 | 0000000 | 00000 |
40 | 2.16" | 1 1/2" | 80 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 7 3/16" | 7 3/8" | 5 | 99% | 4 3/4" | 5" | 0000000 | 000000 | 0000000 | 00000 |
50 | 2.95" | 2" | 175 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 11 11/16" | 8 3/4" | 5 | 99% | 8 3/4" | 5 7/8" | 0000000 | 000000 | 0000000 | 00000 |
Claw-Clamp (ISO-K) Connection—Polyester Plastic Element | |||||||||||||||
63 | 3.74" | 2 1/2" | 175 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 11 11/16" | 8 3/4" | 5 | 99% | 8 3/4" | 5 7/8" | 0000000 | 000000 | 0000000 | 00000 |
100 | 5.12" | 4" | 300 scfm @ 14.7 psi | 1 × 10 -3 torr @ 72° F | -15° to 220° | 16 1/8" | 13 1/4" | 5 | 99% | 10" | 9 1/4" | 0000000 | 000000 | 0000000 | 000000 |
Material | |||||||||
---|---|---|---|---|---|---|---|---|---|
Trade Number | For Flange OD | For Tube OD | High Vacuum Connection Type | O-Ring | Inner Ring | Max. Vacuum | Max. Temp., °F | Each | |
Quick-Clamp Connection | |||||||||
16 | 1.18" | 3/4" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 00000000 | 00000 |
25 | 1.57" | 1" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 0000000 | 0000 |
40 | 2.16" | 1 1/2" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 0000000 | 00000 |
50 | 2.95" | 2" | ISO-KF | Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -7 torr @ 72° F | 300° | 0000000 | 00000 |
Claw-Clamp Connection | |||||||||
63 | 3.74" | 2 1/2" | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -9 torr @ 72° F | 400° | 0000000 | 00000 |
100 | 5.12" | 4" | ISO-K | Viton® Fluoroelastomer Rubber | 304 Stainless Steel | 1 × 10 -9 torr @ 72° F | 400° | 0000000 | 00000 |
Trade Number | For Flange OD | For Tube OD | High Vacuum Connection Type | Material | Max. Vacuum | Each | |
Quick-Clamp Connection—Clamp with Wing Nut | |||||||
---|---|---|---|---|---|---|---|
10, 16 | 1.18" | 1/2", 3/4" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 00000000 | 00000 |
25 | 1.57" | 1" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
40 | 2.16" | 1 1/2" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
50 | 2.95" | 2" | ISO-KF | Aluminum | 1 × 10 -7 torr @ 72° F | 0000000 | 00000 |
Claw-Clamp Connection—Double-Claw Clamp with Bolt | |||||||
63, 80, 100 | 3.74", 4.33", 5.12" | 2 1/2", 3", 4" | ISO-K | Aluminum | 1 × 10 -9 torr @ 72° F | 0000000 | 0000 |
Claw-Clamp Connection—Single-Claw Clamp with Bolt | |||||||
63, 80, 100 | 3.74", 4.33", 5.12" | 2 1/2", 3", 4" | ISO-K | Aluminum | 1 × 10 -9 torr @ 72° F | 0000000 | 0000 |
Each | ||
0000000 | 00000 |