We will reply to your message within an hour.
Strong and durable, these multipurpose bits are for use with bit screwdrivers.
The toughest bits available, these withstand the shock and twisting force of impact drivers.
When you don't have exact alignment between the fastener and the tool, the ball end allows angled entry to turn screws in hard-to-reach areas.
When you don't have exact alignment between the fastener and the bit, the ball end allows angled entry to turn screws in hard-to-reach areas. A retaining ring grips inside the recess to hold screws in place.
A retaining ring at the tip grips inside the recess to ensure screws won't slip off the bit.
An opening at the tip accommodates the pin in the recess of tamper-resistant hex screws. These are also known as pin-in-hex or pin-in-socket bits.
A magnet or retaining ring holds the nut in place.
The toughest bits available, these withstand the shock and twisting force of impact drivers. A magnet holds the nut in place.
Because they make contact on the flat sides of fasteners rather than only on the corners, these magnetic bits significantly reduce slipping and stripping. They’re also known as lobular bits.
Turn hex nuts and cap screws.
A retaining ring grips inside the recess to hold screws in place. These bits have a ball end that allows angled entry to drive screws in hard-to-reach areas.
Assortments contain bits with multiple drive styles.
The knurled shank on these bits allows finger tightening. They can also be used with the included screwdriver.
A magnet holds the nut in place.
These bits are also known as nut setters.
Eliminate the need for multiple bulky tools with these bit adapters. At less than 3 inches long, these compact adapters convert ¼” bit screwdriver handles and ¼” bits into torque screwdrivers so you can fasten to a specific torque.
The assorted drivers in these sets have a ball end that allows angled entry to turn screws in hard-to-reach areas.
These screwdrivers have a soft, contoured handle that provides comfort and the best possible grip for achieving maximum torque.
Sets include an assortment of drivers with soft, contoured handles that provide comfort and the best possible grip for achieving maximum torque.
A holding mechanism at the tip of the tool ensures the screw won’t slip off.
The assorted drivers in these sets have a holding mechanism at the tip that ensures the screw won’t slip off.
These standard nutdrivers have a hollow shaft that provides clearance to remove nuts from long bolts.
A scaled-down version of standard nutdrivers, these tools are shorter, slimmer, and easy to take with you.
Sets include an assortment of nutdrivers.
A magnet in the tip holds nuts in place.
Sets include an assortment of drivers that are drilled all the way through the shaft and handle for turning nuts on any length of threaded rod. They have a magnet in the tip to hold nuts in place.
The shaft and handle are drilled all the way through for turning nuts on any length of threaded rod. These drivers have a magnet in the tip to hold nuts in place.
Press down on the handle’s collar to adjust the shaft length or remove and replace the shaft to change sizes. Sets include a handle and multiple shafts.
The assorted drivers in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. They are tested to 1,000 volts to meet ASTM and IEC standards.
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet ASTM and IEC standards.
Protect your stainless steel fasteners by using a stainless steel driver. If steel flakes off a standard tool and into the threads, it can lead to rust and contamination. These drivers eliminate that risk.
Made of aluminum-bronze that is FM approved, these drivers help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
Insert a bit into the shaft and a magnet holds it in place.
When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.
Bits have a different tip at each end and snap into the shaft, which is also a nutdriver.
Apply constant pressure to small hex nuts and cap screws. Press the rotating end cap on the handle with your palm while turning the body of the driver with your fingertips.
Sets include an assortment of drivers that allow you to apply constant pressure to small hex nuts and cap screws. Press the rotating end cap on the handle with your palm while turning the body of the driver with your fingertips.
Also known as ESD-safe nutdrivers, the handle drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Use the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the driver with your fingertips.
The handle on these assorted ESD-safe nutdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. Press the rotating end cap to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Turn fasteners from either end and reach into tight spots.
Sets include an assortment of keys. These simple tools turn fasteners from either end and reach into tight spots.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. Use to turn screws in hard-to-reach spots.
These keys have an extra-short leg to fit into tight spaces that other tools can’t.
The extra-short leg of these keys fits in tight spaces other tools can't and the long-leg ball end allows angled entry to turn screws in hard-to-reach areas.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places. These keys have a bright gold-plated finish that makes them easy to see and less likely to be misplaced.
These keys have an extra-short leg to fit into tight spaces that other tools can’t, and a ball on the long leg for angled entry to turn screws in hard-to-reach places. A bright chrome-plated finish makes them easy to see and less likely to be misplaced.
All of the keys in these sets have an extra-short leg to fit into tight spots and a ball end to turn screws at an angle in hard-to-reach places. Their bright chrome-plated finish makes them easy to see, reducing the chance you’ll lose them.
These assorted keys have a ball end that allows angled entry to turn screws in hard-to-reach areas. The bright finish makes them easy to see and less likely to be misplaced.
A bright finish makes these tools stand out, so they're less likely to be misplaced. They turn fasteners from either end and reach into tight spots.
These assorted keys have a bright finish that's easy to see, so they’re less likely to be misplaced. They turn fasteners from either end and reach into tight spots.
Sets include assorted keys with each size a different color for easy identification. When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
Each size of these keys is a different color for easy identification. When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
The ball end has a detent to grip inside the screw recess and allows angled entry to turn fasteners in hard-to-reach areas.
These assorted keys have a detent that grips inside the recess to ensure screws won’t fall off. The ball end allows angled entry to drive fasteners in hard-to-reach areas.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places. These keys have a zinc coating that resists salt-spray exposure.
The zinc coating on these keys resists salt-spray exposure. They turn fasteners from either end and reach into tight spots.
The ball end allows angled entry to turn screws in hard-to-reach areas. Protect your stainless steel screws by using a stainless steel L-key. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
Sets include an assortment of stainless steel keys with a ball end that allows angled entry to turn screws in hard-to-reach areas. Use a stainless steel L-key to protect your stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
Protect your stainless steel screws by using a stainless steel L-key. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
Sets include an assortment of stainless steel keys, which protect stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
Use these keys where a magnetized tool can cause damage. They are made of corrosion-resistant titanium. Keys turn fasteners from either end.
Made of beryllium copper that is FM approved, these keys help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. They turn fasteners from either end and reach into tight spots.
These assorted keys are made of beryllium copper that is FM approved. They help meet OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Keys turn fasteners from either end and reach into tight spots.
The T-handle provides a good grip for your whole hand and the long shaft reaches into tight spots.
Sets include assorted keys with long shafts that reach into tight spots. The plastic-covered handles provide a good grip for your whole hand.
When working in tight spaces, these short keys fit where others can't.
Sets include an assortment of short keys that fit in tight spaces where others can't.
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t.
When a standard-tip key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places. These keys have a textured grip that provides comfort, slip resistance, and maximum torque.
These assorted keys have a ball end that allows angled entry to make good contact with the screw recess when standard-tip keys can’t. The textured grip provides comfort, slip resistance, and maximum torque.
The textured grip provides comfort, slip resistance, and maximum torque. These keys have a long shaft for reaching into tight spots to turn fasteners.
These assorted keys have a textured grip that provides comfort, slip resistance, and maximum torque. They have a long shaft for reaching into tight spots to turn fasteners.
With a simple loop handle, these keys are the economical choice. They have a long shaft for reaching into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.
The economical choice, these sets include an assortment of keys with a simple loop handle. The long shaft reaches into tight spots and the T-handle provides a good grip for your whole hand when turning fasteners.
The extra-long shaft lets you access fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.
These assorted keys have an extra-long shaft that provides access to fasteners in deep recesses. To change tips, use a hex key to loosen the set screw.
The long shaft has a ball end for angled entry to turn screws in hard-to-reach areas. The short shaft provides additional torque.
These sets include an assortment of keys with a ball end on the long shaft, which allows angled entry to turn screws in hard-to-reach areas. The short shaft provides additional torque.
The ball-end tip has a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.
These assorted keys have a ball-end tip with a retaining ring that grips inside the recess to hold screws in place and allows angled entry to turn fasteners in hard-to-reach areas.
Protect your stainless steel screws by using a stainless steel key. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
The long shaft provides more reach and the short shaft more torque. Protect your stainless steel screws by using a stainless steel key. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
Sets include an assortment of keys with a long shaft for more reach and a short shaft for more torque. Use stainless steel keys to protect your stainless steel screws. If steel flakes off a standard tool and into the recess, it can lead to rust and contamination. These keys eliminate that risk.
An insulated handle and shaft protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC and ASTM standards. They have a long shaft that reaches into tight spots to turn fasteners.
The assorted keys in these sets have an insulated handle and shaft that protect against shock from accidental contact with live electrical circuits. These tools are tested to 1,000 volts to meet IEC 60900 and ASTM F1505-01. They have a long shaft that reaches into tight spots to turn fasteners.
Create your own tool by attaching these shafts to a handle, or use with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
These assorted shafts attach to a handle or can be used with socket wrenches and power tools. They have a ball end that allows angled entry to make good contact with the recess when a standard-tip shaft can’t.
These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter.
Start and initially turn nuts. These tools are not intended for final tightening or removal of fasteners.
The slim body reaches into tight spots to grip and turn screws that are hard to reach or too small to hold by hand.
When a straight-end key can't make good contact with the recess, a ball end allows angled entry to turn screws in hard-to-reach places.
Keep a set of keys neatly in your tool box or pocket to turn multiple fastener sizes.
Select any key without unfolding the others in the set. The assorted keys turn multiple fastener sizes.
Bright-colored handles make these tools stand out, so they’re less likely to be misplaced. Sets include an assortment of keys for turning multiple fastener sizes.
When working at heights, secure a lanyard to the ring on these tools and prevent drops. Sets include an assortment of keys for turning multiple fastener sizes.
Insulated to protect against accidental contact with live electrical circuits, these sockets are tested to 1,000 volts to meet ASTM F1505 and IEC 60900.
Extra-long bits allow access to hard-to-reach fasteners.
The short bit on these sockets fits in spaces where height clearance is limited.
The ball end allows angled entry when you don't have exact alignment between the socket bit and fastener.
These sockets are also known as pin-in-hex or pin-in-socket bits.
These short sockets fit spaces where height clearance is limited.
Pivot the head to access fasteners from an angle.
Turn many sizes of square, hex, and 8-point fasteners with one socket. Place over the fastener and 54 pins move to grip it securely.
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
Achieve the best possible grip on hex fasteners and prevent rounding.
A magnet holds the fastener securely enough to drive self-tapping screws.
With a smaller OD than standard sockets, these fit between tightly spaced fasteners.
Use bit sockets as an alternative to a screwdriver or L-key.
The hex shape grips hex fasteners and prevents rounding.
Keep a convenient mix of hex, Torx, Phillips, and slotted bit sockets on hand.
Suitable for occasional maintenance work, these sets are imported.
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish.
For high quality at a lower price, choose these U.S.A.-made sets.
Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
One head is angled 60° for access to hard-to-reach fasteners. These are also known as ignition wrenches.
These wrenches are made of stainless steel for excellent corrosion resistance.
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
The opening shape makes more contact with fasteners for a better grip than standard open-end wrenches. These tools are also known as flare-nut or line wrenches.
One head is angled for access to hard-to-reach fasteners. These are also known as ignition wrenches.
Sized for working on small equipment, these wrenches are 4 1/8" long with a slim head and handle.
When turning fasteners in small spaces, these short wrenches fit where others can't.
Made of stainless steel, these wrenches have excellent corrosion resistance.
One head is angled 75° for access to hard-to-reach fasteners. These are also known as ignition wrenches.
A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench.
Flip these wrenches over to ratchet in the opposite direction.
When working in tight spaces, these short wrenches fit where others can't.
Pivot the box end for access to fasteners in tight spots.
Ratchet mechanisms allow you to turn fasteners in tight spaces without removing and repositioning the tool.
The offset head gives you additional clearance to turn hard-to-reach fasteners.
The 25° offset heads give you additional clearance to turn hard-to-reach fasteners.
An extra-long handle provides access to hard-to-reach fasteners and increases leverage.
The heads are angled to provide clearance around obstructions.
The heads are offset to provide clearance for reaching over obstructions.
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench.
Change heads to use these tools as an open-end, box, square drive, or hex-key wrench.