6-Point Sockets
Achieve the best possible grip on hex fasteners and prevent rounding.
For technical drawings and 3-D models, click on a part number.
Deep | ||||
---|---|---|---|---|
Drive Size | Material | Overall Lg. | Each | |
Inch | ||||
3/4" Square Drive | ||||
1 5/8" | Chrome-Plated Steel | 3 1/2" | 0000000 | 000000 |
Nonsparking 6-Point Sockets
Made of aluminum-bronze, these sockets satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. The hex shape provides the best possible grip on hex fasteners and prevents rounding.
Warning: Do not use these tools in direct contact with acetylene.
For technical drawings and 3-D models, click on a part number.
12-Point Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are for hand-driven use only.
For technical drawings and 3-D models, click on a part number.
Tight-Clearance Offset Sockets
Often used with an extension, these sockets turn fasteners and fittings in obstructed areas that a regular socket can't reach. They are also known as crowfoot wrenches.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Each | |
Inch | ||||||
---|---|---|---|---|---|---|
1/2" Square Drive | ||||||
1 5/8" | 3 1/4" | 1/2" | 2" | Chrome-Plated Steel | 0000000 | 000000 |
Secure-Grip Tight-Clearance Offset Sockets
The opening makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines.
12-point secure-grip sockets quickly position on hex fasteners.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Thick. | Center-to-Center Lg. | Material | Wrench Opening Shape | Each | |
1/2" Square Drive | |||||||
---|---|---|---|---|---|---|---|
1 5/8" | 2 7/8" | 31/32" | 1 1/2" | Chrome-Plated Steel | 12-Point | 0000000 | 000000 |
6-Point Impact Sockets
Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.
3/4", 1", and 1 1/2" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Sockets | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
Drive Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
1 5/8" | 1 1/16" | 1 11/16" | __ | Steel | Black Oxide | 2 3/8" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
1 5/8" | 1" | 1 13/32" | 1 7/16" | Steel | Black Oxide | 2 3/8" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
1 5/8" | 1" | 1 1/2" | 2 1/8" | Steel | Black Oxide | 2 11/16" | 00000000 | 00000 | 0000000 | 0000 |
Sockets | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Clearance Depth | Retaining Rings | |||||||||
Drive Size | Nut | Bolt | Compatible Retaining Ring ID | Material | Finish | Overall Lg. | Each | Each | ||
1/2" Square Drive | ||||||||||
1 5/8" | 2 9/32" | 3 1/32" | __ | Steel | Black Oxide | 3 11/16" | 00000000 | 000000 | 000000 | 00 |
3/4" Square Drive | ||||||||||
1 5/8" | 15/16" | 2 17/32" | 1 7/16" | Steel | Black Oxide | 3 1/2" | 0000000 | 00000 | 0000000 | 00000 |
1" Square Drive | ||||||||||
1 5/8" | 2 13/32" | 3 3/32" | 2" | Steel | Black Oxide | 3 5/8" | 00000000 | 00000 | 00000000 | 0000 |
12-Point Impact Sockets
The 12-point shape quickly positions on hex fasteners. These sockets are made to withstand the high torque and force of impact tools.
3/4" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
For technical drawings and 3-D models, click on a part number.
Premium 6-Point Socket Sets
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The hex shape grips hex fasteners and prevents rounding.
No. of Pieces | Includes | Each | |
3/4" Square Drive | |||
---|---|---|---|
11 | Deep Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8" | 0000000 | 0000000 |
Premium 12-Point Socket Sets
Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The 12-point shape quickly positions on hex fasteners.
No. of Pieces | Components Included | Includes | Each | |
3/4" Square Drive | ||||
---|---|---|---|---|
22 | 16 Sockets 2 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8", 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2" 20 1/8" Long Ratchet Wrench 22 1/8" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Square Drive Adapter | 0000000 | 000000000 |
29 | 22 Sockets 3 Drive Tools 3 Extensions 1 Adapter | Standard Sockets: 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 3/16", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 9/16", 1 5/8, 1 11/16", 1 3/4", 1 13/16", 1 7/8", 2", 2 1/8", 2 3/16", 2 1/4", 2 3/8" 20 1/8" Long Ratchet Wrench 19" Long Sliding-Head Wrench Handle 22 1/8" Long Flex-Head Wrench Handle 3" Long Extension 8" Long Extension 16" Long Extension 4 1/16" Long Flex Adapter | 0000000 | 00000000 |
Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set | 0000000 | Each | 0000000 |
Secure-Grip Tight-Clearance Offset Socket Sets
The opening makes more contact with fasteners for a better grip than standard open-end sockets. Also known as flare-nut or line wrench sockets, they're often used with flared tube fittings and fuel and hydraulic lines. 12-point secure-grip sockets quickly position on hex fasteners.
For technical drawings and 3-D models, click on a part number.
No. of Pieces | Includes | Material | Wrench Opening Shape | Each | |
1/2" Square Drive | |||||
---|---|---|---|---|---|
8 | Offset Sockets: 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 1/2", 1 5/8", 1 3/4", 2" | Chrome-Plated Steel | 12-Point | 0000000 | 0000000 |
6-Point Impact Socket Sets
The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.
3/4" square drive size sockets require a locking retainer. Use with an impact wrench that has a pin-style socket retainer, or use a socket retaining ring with tools that have a hole- or hole-and-ring style socket retainer.
No. of Pieces | Components Included | Includes | Finish | Each | |
3/4" Square Drive—Steel | |||||
---|---|---|---|---|---|
8 | 8 Sockets | Standard Sockets: 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 7/16", 1 1/2", 1 5/8" | Black Oxide | 0000000 | 0000000 |
13 | 12 Sockets 1 Extension | Standard Sockets: 3/4", 7/8", 15/16", 1", 1 1/16", 1 1/8", 1 1/4", 1 5/16", 1 3/8", 1 7/16", 1 1/2", 1 5/8" 7" Long Extension | Black Oxide | 0000000 | 000000 |
Ratcheting Combination Wrenches
A ratchet mechanism in the box end allows you to turn fasteners in tight spaces without removing and repositioning the wrench. Flip these wrenches over to ratchet in the opposite direction. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet. Wrenches are polished for a mirror-like finish.
For technical drawings and 3-D models, click on a part number.
Box End | Open End | ||||||||
---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Head Thick. | Turn Required to Ratchet | Opening Angle | Head Thick. | Material | Appearance | Each | |
Inch—12-Point Box Opening | |||||||||
1 5/8" | 23" | 55/64" | 5° | 15° | 23/32" | Chrome-Plated Steel | Polished | 0000000 | 000000 |
Combination Wrenches
12-Point Box Opening | |
Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Nonsparking Combination Wrenches
Made of materials that are Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present.
Warning: Do not use these tools in direct contact with acetylene.
For technical drawings and 3-D models, click on a part number.
Box End | Open End | ||||||||
---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Head Offset Angle | Head Thick. | Opening Angle | Head Thick. | Material | Specifications Met | Each | |
Inch—12-Point Box Opening | |||||||||
1 5/8" | 20 7/8" | 15° | 49/64" | 15° | 19/32" | Aluminum-Bronze | FM Approved | 0000000 | 0000000 |
Open-End Wrenches
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Inch | ||||||||
---|---|---|---|---|---|---|---|---|
Rounded Opening | ||||||||
1 5/8" | 15" | 15° | 7/8" | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Two-Head Open-End Wrenches
60° Angle Open-End Wrenches
One head is angled 60° for access to hard-to-reach fasteners. These tools are also known as ignition wrenches.
For technical drawings and 3-D models, click on a part number.
Tight-Clearance Open-End Wrenches
Fit the narrow head into tight spaces and around thin fasteners.
For technical drawings and 3-D models, click on a part number.
Multi-Size Open-End Wrenches
Also known as alligator wrenches and water-meter nut wrenches, the V-shaped head fits multiple hex fastener sizes.
Drive Size | Overall Lg. | Opening Angle | Head Thick. | Jaw Finish | Material | Color | Grip Material | Each | |
3/4"–2" | 21" | Straight | 11/16" | Zinc Plated | Powder-Coated Steel | Red | Plastic | 0000000 | 0000000 |
Striking Open-End Wrenches
Strike the handle with a hammer to break stuck fasteners free. These are also known as slugging wrenches.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Specifications Met | Each | |
Rounded Opening | |||||||
---|---|---|---|---|---|---|---|
Inch | |||||||
1 5/8" | 9 1/4" | 15° | 47/64" | Steel | DIN 133 | 00000000 | 0000000 |
Tapered-Handle Open-End Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Opening Angle | Head Thick. | Material | Finish | Specifications Met | Each | |
Rounded Opening | ||||||||
---|---|---|---|---|---|---|---|---|
1 5/8" | 23" | 15° | 15/16" | Steel | Black Oxide | ASME B107.100 | 0000000 | 000000 |
Deep-Offset Tapered-Handle Open-End Wrenches
The head is offset 45° to provide clearance when reaching over obstructions.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Opening Angle | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
Rounded Opening | |||||||||
---|---|---|---|---|---|---|---|---|---|
1 5/8" | 23" | Straight | 13/16" | 45° | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Open-End Wrench Sets
Sizes Included | Overall Lg. | Opening Angle | Material | Appearance | Container Type | Each | |
Inch Wrench Sets | |||||||
---|---|---|---|---|---|---|---|
12-Piece Sets | |||||||
1/4" × 5/16" 3/8" × 7/16" 1/2" × 9/16" 5/8" × 11/16" 3/4" × 13/16" 7/8" × 15/16" 15/16" × 1" 1 1/16" × 1 1/4" 1 1/8" × 1 3/16" 1 1/4" × 1 5/16" 1 3/8" × 1 7/16" 1 1/2" × 1 5/8" | 4 1/2"-17" | 15° | Chrome-Plated Steel | Dull | Plastic Roll-Up Pouch | 000000 | 0000000 |
Ratcheting Box Wrenches
A ratchet mechanism allows you to turn fasteners in tight spaces without removing and repositioning the wrench. The smaller the turn required to ratchet, the less clearance you need to engage the ratchet.
Wrenches | Repair Kits | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Drive Size | Overall Lg. | Head OD | Head Thick. | Turn Required to Ratchet | Material | Grip Material | Specifications Met | Each | Each | ||
Inch | |||||||||||
6-Point Opening | |||||||||||
1 5/8" | 26" | 3 3/4" | 1 3/8" | 25° | Black Painted Iron | __ | __ | 00000000 | 0000000 | 00000000 | 000000 |
12-Point Opening | |||||||||||
1 5/8" | 15 1/2" | 2 3/4" | 5/8" | 20° | Chrome-Plated Steel | Plastic | Fed. Spec. GGG-W-001405 | 0000000 | 000000 | 000000 | 00 |
High-Leverage Box Wrenches
The long handle provides extra leverage—add an extension to increase it even more.
Extension handles (sold separately) fit securely over the end of the wrench.
For technical drawings and 3-D models, click on a part number.
Tapered-Handle Box Wrenches
Also known as spud, structural, and construction wrenches, use the pointed end of the handle to align bolt holes during assembly.
For technical drawings and 3-D models, click on a part number.
Drive Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
---|---|---|---|---|---|---|---|---|
1 5/8" | 21" | 1 3/16" | 60° | Steel | Black Oxide | ASME B107.100 | 0000000 | 0000000 |
Deep-Offset Striking Box Wrenches
The head is offset 45° to provide clearance for reaching over obstructions. Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
Drive Size | Overall Lg. | Head Thick. | Head Offset Angle | Material | Finish | Specifications Met | Each | |
12-Point Opening | ||||||||
---|---|---|---|---|---|---|---|---|
1 5/8" | 12" | 1 1/16" | 45° | Steel | Black Oxide | ASME B107.100 | 0000000 | 000000 |
Striking Box Wrenches
Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free. Wrenches with a 12-point opening are easier to position on hex fasteners than wrenches with a 6-point opening but make less contact.
For technical drawings and 3-D models, click on a part number.
Nonsparking Striking Box Wrenches
Made of aluminum-bronze that is Factory Mutual approved, these wrenches inhibit sparking and are nonmagnetic and corrosion resistant. They satisfy OSHA requirements that specify nonsparking tools for locations where flammable vapors and combustible residues are present. Also known as slugging wrenches, strike the handle with a hammer to break stuck fasteners free.
Warning: Do not use these tools in direct contact with acetylene.
Drive Size | Overall Lg. | Head Thick. | Material | Specifications Met | Each | |
6-Point Opening | ||||||
---|---|---|---|---|---|---|
1 5/8" | 8 3/4" | 1" | Aluminum-Bronze | FM Approved | 0000000 | 0000000 |