9/32" Hex Drivers | McMaster-Carr

Clear All

	For Drive Style For Drive Style


Hex	External Hex	Phillips

Slotted	Torx	Tamper- Resistant Hex

Square	Pozidriv®	External 12-Point

Tamper- Resistant Torx	Drilled Spanner	External Square

Clutch	External Spline

	Driver Style Driver Style


Bit	Driver

	System of Measurement System of Measurement

Inch

Metric

in.-lbs.

	Size Size	Show

9/32"

	Size Size	Hide

	Individual/Set Individual/Set

Individual

Set

	Overall Length Overall Length

	Tip Style Tip Style

	Standard

	Shank Type Shank Type

Quick-Change Hex

Hex

Reversible Hex

	Hex Shank Size Hex Shank Size

1/4"

5/16"

	Number of Pieces Number of Pieces

100

	Torque Adjustability Torque Adjustability

Adjustable

	Container Type Container Type

Plastic Roll-Up Pouch

	Maximum Torque Maximum Torque

Less than 500 in.-lbs.

4 Nm

	For Bit Hex Shank Size For Bit Hex Shank Size

1/4"

	Minimum Torque Minimum Torque

2 in.-lbs.

0.2 Nm

	Driver Type Driver Type

Standard

Torque

	Graduations Graduations

2 in.-lbs.

0.2 Nm

	Clockwise Accuracy Clockwise Accuracy

±6%

	Material Material

Steel

	Torque Driver Type Torque Driver Type

Torque Limiting

	Grip Style Grip Style

	Plain

	Torque-Limiting Mechanism Torque-Limiting Mechanism

Slip Release

	DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense Acquisition Regulations Supplement)

DFARS Specialty Metals
COTS-Exempt

View catalog pages (22)

Forward

How can we improve?

47 Products

About Torque Tools

Hex Shank

Hex Shank for Power Tools

External Hex

Also known as nut setters, these bits turn hex nuts and cap screws.

Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.

Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.

For technical drawings and 3-D models, click on a part number.

		Overall
Size	Bolt Clearance	Lg.	OD	Material		Each
1/4" Hex Shank Size
9/32"	1/4"	1 1/2"	0.422"	Steel	00000000	00000
1/4" Hex Shank Size for Power Tools
9/32"	1 3/8"	3 1/4"	0.5"	Steel	0000000	00000

Bit Assortments

These assortments contain general-purpose bits.

Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.

Hex

Clutch

Tamper-Resistant Hex

Phillips

Slotted

Torx

Clutch

Square

Drilled Spanner

Pozidriv®

Tamper-Resistant Torx

External Hex

1/4" Hex Shank Size—Steel
No. of Pieces	Components Included	Bits Included	Adapters Included	Drive Tools Included		Each
17	16 Bits 1 Adapter	Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Slotted: 3/16" (1" O'all Lg.)—1 ea. Slotted: 7/32", 1/4", 9/32" (1" O'all Lg.)—2 ea.	2 1/8" Lg. Bit Adapter for Power Tools	__	0000000	000000
27	25 Bits 1 Adapter 1 Drive Tool	Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.) Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.) Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.) Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Clutch: 1/8", 5/32" (1" O'all Lg.)	2 1/4" Lg. Bit Adapter for Power Tools	7 3/4" Lg. Bit Screwdriver	00000000	00000
29	26 Bits 2 Adapters 1 Drive Tool	Phillips: No. 1, No. 3 (1" O'all Lg.)—1 ea. Phillips: No. 2 (1" O'all Lg.)—2 ea. Slotted: 3/16", 1/4", 9/32" (1" O'all Lg.)—1 ea. Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64", 5/32" 3/16", 7/32", 1/4", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea.	1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools	7 3/4" Lg. Bit Screwdriver	00000000	00000
40	37 Bits 2 Adapters 1 Drive Tool	Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea. Slotted: 9/32" (1" O'all Lg.)—2 ea. Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea. Hex (Metric): 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15, T20, T25, T27 T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea. Clutch: 5/32" (1" O'all Lg.)—1 ea.	1 7/8" Lg. Bit Adapter for Power Tools 1/4" Male Square Drive × 1/4" Hex Shank Adapter	7 1/2" Lg. Bit Screwdriver	0000000	00000
100	96 Bits 4 Adapters	Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea.	1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools	__	000000	00000
1/4" Hex Shank Size and 1/4" Hex Shank Size for Power Tools—Steel
39	37 Bits 2 Adapters	Phillips Hex Shank: No. 0 (1" O'all Lg.)—1 ea. Phillips Hex Shank: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips Hex Shank: No. 2 (1" O'all Lg.)—9 ea. Phillips Hex Shank for Power Tools: No. 1, No. 3 (2" O'all Lg.)—2 ea. Phillips Hex Shank for Power Tools: No. 2 (2" O'all Lg.)—8 ea. Slotted Hex Shank: 3/16", 7/32", 9/32" (1" O'all Lg.)—1 ea. Slotted Hex Shank: 1/4" (1" O'all Lg.)—2 ea. Slotted Hex Shank for Power Tools: 3/16" (2" O'all Lg.)—1 ea. Slotted Hex Shank for Power Tools: 7/32" 1/4" (2" O'all Lg.)—2 ea.	1/4" Female Square Drive × 1/4" Female Hex Adapter 3" Lg. Bit Adapter for Power Tools	__	00000000	00000
1/4" Hex Shank Size and 1/4" Reversible Hex—Steel
30	29 Bits 1 Adapter	Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—7 ea. Reversible Phillips: No. 2 × No. 2 (2 3/8" O'all Lg.)—2 ea. Slotted: 13/64", 15/64", 9/32" (1" O'all Lg.)—1 ea. Reversible Slotted: 15/64" × 15/64" (2 3/8" O'all Lg.)—1 ea. Square: No. 2 (1" O'all Lg.)—5 ea. Square: No. 1, No. 3 (1" O'all Lg.)—1 ea. Reversible Square: No. 2 × No. 2 (2 3/8" O'all Lg.)—1 ea. External Hex: 1/4", 5/16", 3/8" 7/16" (2 5/8" O'all Lg.)—1 ea.	2 1/4" Lg. Bit Adapter for Power Tools	__	00000000	00000
1/4" Hex Shank Size for Power Tools—Steel
50	50 Bits	Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea.	__	__	000000	00000
1/4" and 5/16" Hex Shank Size—Steel
35	32 Bits 1 Extension 2 Drive Tools	Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.) Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8" 9/64", 7/32", 1/4" (1" O'all Lg.) Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.) Torx 1/4" Hex Shank: T10, T15, T20, T25, T27 T30 (1" O'all Lg.) Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.) Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.) Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32" 3/16" (1" O'all Lg.)	__	5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver 5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver	00000000	000000

Nutdriver Bit Sets

Hex Shank

External Hex

Also known as nut setters, these bits turn hex nuts and cap screws.

Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.

For technical drawings and 3-D models, click on a part number.

1/4" Hex Shank Size
Components Included	Bits Included	Bolt Clearance	Overall Dia.	Material	Container Type		Each
7 Bits	External Hex: 3/16", 1/4" (1 3/8" O'all Lg.) External Hex: 7/16" (1 5/8" O'all Lg.) External Hex: 9/32", 5/16", 11/32", 3/8" (1 1/2" O'all Lg.)	3/16"-5/16"	5/16"-5/8"	Steel	Plastic Caddy	00000000	000000

Nutdrivers

These standard nutdrivers have a hollow shaft that provides clearance to remove nuts from long bolts.

Inch size nutdrivers are color-coded by size.

				Shaft
Size	Size Color	Overall Lg.	Bolt Clearance	Lg.	O'all Wd.	Material	Handle Material		Each
External Hex
9/32"	Orange	6 5/8"	3"	3"	7/16"	Chrome-Plated Steel	Plastic	0000000	00000

Nutdriver Sets

External Hex

Sets include an assortment of nutdrivers.

Inch size nutdrivers are color-coded by size.

External Hex
Number of Pieces	Includes	Bolt Clearance	Material	Handle Material	Container Type		Each
10	3/16" Black Nutdriver—7" O'all Lg. 7/32" Brown Nutdriver—7" O'all Lg. 1/4" Red Nutdriver—7" O'all Lg. 9/32" Orange Nutdriver—7" O'all Lg. 5/16" Yellow Nutdriver—7 1/2" O'all Lg. 11/32" Green Nutdriver—7 1/2" O'all Lg. 3/8" Blue Nutdriver—7 1/2" O'all Lg. 7/16" Brown Nutdriver—8 3/4" O'all Lg. 1/2" Red Nutdriver—8 3/4" O'all Lg. 9/16" Orange Nutdriver—8 3/4" O'all Lg.	1 9/16"-3 1/8"	Steel	Plastic	Fabric Roll-Up Pouch	0000000	000000

Compact Nutdriver Sets

External Hex

A scaled-down version of standard nutdrivers, these tools are shorter, slimmer, and easy to take with you. Sets include a secondary handle that slips over the attached handle for greater torque and a more comfortable grip. Drivers are color-coded by size.

External Hex
Number of Pieces	Includes	Overall Lg. with Secondary Handle	Bolt Clearance	Material	Handle Material	Container Type		Each
11	3/32" Blue Nutdriver—3 1/2" O'all Lg. 1/8" Red Nutdriver—3 1/2" O'all Lg. 5/32" Yellow Nutdriver—3 1/2" O'all Lg. 3/16" Black Nutdriver—3 1/2" O'all Lg. 7/32" Brown Nutdriver—3 1/2" O'all Lg. 1/4" Red Nutdriver—3 1/2" O'all Lg. 9/32" Orange Nutdriver—3 1/2" O'all Lg. 5/16" Yellow Nutdriver—3 1/2" O'all Lg. 11/32" Green Nutdriver—3 1/2" O'all Lg. 3/8" Blue Nutdriver—3 1/2" O'all Lg. Secondary Nutdriver Handle	5 1/8"	7/16"-3/4"	Zinc-Plated Steel	Plastic	Plastic Case	0000000	000000

Torque Screwdriver and Bit Sets

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. Turn the collar on the driver to adjust torque. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

								Shaft
No. of Pieces	Includes	Torque Range	Graduations	For Bit Hex Shank Size	Torque-Limiting Direction	Clockwise Accuracy	O'all Lg.	Material	Handle	Certification		Each
Slip-Release Torque Limiter
in.-lbs., Nm
29	26 Bits 1 Adapter 1 Extension 1 Drive Tool 1/4” Square Drive Socket Adapter Screwdriver Bit Extension Torque-Limiting Screwdriver	2-36 in.-lbs. 0.2-4 Nm	2 in.-lbs. 0.2 Nm	1/4"	Clockwise	±6%	7 3/4"	Aluminum	Aluminum	Calibration Certificate with Test Data Traceable to NIST	0000000	0000000

6-Point Sockets

Standard

Deep

Achieve the best possible grip on hex fasteners and prevent rounding.

			Standard			Deep
Size	Material	Specifications Met	Overall Lg.		Each	Overall Lg.		Each
1/4" Square Drive
9/32"	Chrome-Plated Steel	ASME B107.110, SAE AS4984A	7/8"	0000000	00000	__	000000	00
9/32"	Chrome-Plated Steel	ASME B107.110, SAE AS954G	__	000000	00	2"	0000000	00000

12-Point Sockets

Standard

Deep

The 12-point shape quickly positions on hex fasteners. These sockets are for hand-driven use only.

			Standard			Deep
Size	Material	Specifications Met	Overall Lg.		Each	Overall Lg.		Each
Chrome Plated
1/4" Square Drive
9/32"	Steel	__	7/8"	0000000	00000	2"	0000000	00000
3/8" Square Drive
9/32"	Steel	ISO 1174	1 1/8"	0000000	00000	__	000000	00

12-Point Flex Sockets

Pivot the head to access fasteners from an angle. These sockets have a 12-point shape that quickly positions on hex fasteners.

1/4" Square Drive
Size	Overall Lg.	OD	Material		Each
9/32"	1 1/4"	1/2"	Chrome-Plated Steel	0000000	000000

Impact Hex Bit Sockets

These sockets are made to withstand the high torque and force of impact tools.

1/2" Square Drive
Size	Overall Lg.	Material	Finish	Bit Replaceable		Each
9/32"	3 15/16"	Steel	Black	No	00000000	000000

6-Point Impact Sockets

Achieve the best possible grip on hex fasteners and prevent rounding. These sockets are made to withstand the high torque and force of impact tools.

Standard

	Clearance Depth
Size	Nut	Bolt	Material	Finish	Overall Lg.		Each
1/4" Square Drive
9/32"	15/64"	1/2"	Steel	Black	7/8"	0000000	00000
3/8" Square Drive
9/32"	5/16"	19/32"	Steel	Black	1 1/8"	0000000	0000

Deep

	Clearance Depth
Size	Nut	Bolt	Material	Finish	Overall Lg.		Each
1/4" Square Drive
9/32"	19/64"	1 5/8"	Steel	Black	2"	0000000	00000
3/8" Square Drive
9/32"	5/16"	2 1/4"	Steel	Black	2 3/4"	0000000	0000

Premium 6-Point Socket Sets

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The hex shape grips hex fasteners and prevents rounding.

Sockets—Chrome-Plated Steel

1/4" Square Drive
No. of Pieces	Includes		Each
10	Deep Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"	00000000	000000
10	Standard Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"	00000000	00000

Sockets with Drive Tools—Chrome-Plated Steel

1/4" Square Drive
No. of Pieces	Components Included	Includes		Each
15	9 Sockets 2 Drive Tools 2 Extensions	Standard Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 6" Long Socket Screwdriver Handle 5" Long Ratchet Wrench 2" Long Extension 6" Long Extension	00000000	0000000
25	20 Sockets 2 Drive Tools 2 Extensions 1 Adapter	6-Point Deep Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 6-Point Standard Sockets: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 12-Point Deep Sockets: 9/16" 6" Long Socket Screwdriver Handle 5 1/4" Long Ratchet Wrench 2" Long Extension 6" Long Extension 1 5/16" Long Flex Adapter	0000000	000000
1/4", 3/8" Square Drive
22	17 Sockets 2 Drive Tools 2 Extensions 1 Adapter	1/4" Standard Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8" 3/8" Standard Sockets: 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 13/16", 7/8", 15/16", 1" 6" Long 1/4" Square Drive Socket Screwdriver Handle 7" Long 3/8" Square Drive Ratchet Wrench 3" Long 3/8" Square Drive Extension 6" Long 3/8" Square Drive Extension 3/8" Female Square Drive × 1/4" Male Square Drive Size Adapter	00000000	000000

Foam Socket Organizer for 10 Piece 1/4" Square Drive Size Set	Each	000000
Foam Socket Organizer for 15 Piece 1/2" Square Drive Size Set	Each	00000
Foam Socket Organizer for 19 Piece 3/8" Square Drive Size Set	Each	00000

Economy 6-Point Socket Sets

Suitable for occasional maintenance work, these sets are imported. The hex shape grips hex fasteners and prevents rounding.

1/4" Square Drive—Chrome-Plated Steel
No. of Pieces	Components Included	Includes		Each
21	16 Sockets 2 Drive Tools 2 Extensions 1 Adapter	Standard Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" Deep Sockets: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 5 1/2" Long Ratchet Wrench 5 7/8" Long Socket Screwdriver Handle 3" Long Extension 6" Long Extension 1 3/8" Long Flex Adapter	0000000	000000
1/4", 3/8" Square Drive—Chrome-Plated Steel
75	70 Sockets 2 Drive Tools 3 Extensions	1/4" Standard Sockets (Inch): 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 1/4" Deep Sockets (Inch): 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2" 1/4" Standard Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm 1/4" Deep Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm 3/8" Standard Sockets (Inch): 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 13/16" 3/8" Deep Sockets (Inch): 3/8", 7/16", 1/2", 9/16" 3/8" Standard Sockets (Metric): 6 mm, 7 mm, 8 mm, 9 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm, 17 mm, 19 mm 3/8" Deep Sockets (Metric): 10 mm, 12 mm, 13 mm 3/8" Deep Spark-Plug (Inch): 5/8" 5 1/2" Long 1/4" Square Drive Ratchet Wrench 5 1/2" Long 3/8" Square Drive Ratchet Wrench 3" Long 3/8" Square Drive Extension 3" Long 1/4" Square Drive Extension 6" Long 1/4" Square Drive Extension	00000000	00000

Value 6-Point Socket Sets

For high quality at a lower price, choose these U.S.A.-made sets. They have a hex shape that grips hex fasteners and prevents rounding.

Sockets—Chrome-Plated Steel

1/4" Square Drive
No. of Pieces	Includes		Each
10	Standard Sockets: 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2"	0000000	000000

Premium 12-Point Socket Sets

Made in the U.S.A., these tools handle the toughest industrial applications, provide the best grip on fasteners, and have a superior finish. The 12-point shape quickly positions on hex fasteners.

Sockets—Chrome-Plated Steel

1/4" Square Drive
No. of Pieces	Includes		Each
10	Deep Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"	00000000	000000
10	Standard Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16"	00000000	00000

Sockets with Drive Tools—Chrome-Plated Steel

1/4" Square Drive
No. of Pieces	Components Included	Includes		Each
25	20 Sockets 2 Drive Tools 2 Extensions 1 Adapter	Standard Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" Deep Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16" 5" Long Ratchet Wrench 7" Long Socket Screwdriver Handle 2" Long Extension 6" Long Extension 1 3/8" Long Flex Adapter	0000000	0000000

Foam Socket Organizer for 22 Piece 3/4" Square Drive Size Set

0000000

Each

0000000

Impact Hex Bit Socket Sets

Plastic Case

Use these sockets as an alternative to a screwdriver or L-key. They are made to withstand the high torque and force of impact tools.

1/2" Square Drive
No. of Pieces	Includes	Overall Lg.	Material	Finish	Container Type		Each
10	Bit Sockets: 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" (6" O'all Lg.)	6"	Steel	Black	Metal Clip Rail	0000000	0000000
18	Bit Sockets (Inch): 1/4", 9/32", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4" (3" O'all Lg.) Bit Sockets: (Metric): 6 mm, 7 mm, 10 mm, 12 mm, 14 mm, 15 mm, 17 mm, 18 mm (3" O'all Lg.)	3"	Steel	Black	Plastic Case	0000000	000000

6-Point Impact Socket Sets

Sockets

The hex shape grips hex fasteners and prevents rounding. These sockets are made to withstand the high torque and force of impact tools.

For technical drawings and 3-D models, click on a part number.

1/4" Square Drive—Steel
No. of Pieces	Components Included	Includes	Finish		Each
11	11 Sockets	Deep Sockets: 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8"	Black	00000000	000000

Spline Ratcheting Combination Wrenches

A spline-shaped box end turns spline, hex, and 12-point fasteners with minimal effort. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench. These wrenches have a ratchet mechanism that allows you to turn fasteners in tight spaces without removing and repositioning. Flip over to ratchet in the opposite direction. Wrenches are polished for a mirror-like finish.

For technical drawings and 3-D models, click on a part number.

Box End
External Hex/12-Point Size	External Spline Size	Head Offset Angle	Head Thick.	Turn Required to Ratchet	Size	Head Thick.	Opening Angle	Overall Lg.	Material	Appearance		Each
9/32"	No. 9	15°	17/64"	5°	9/32"	11/64"	15°	5 11/64"	Chrome-Plated Steel	Polished	0000000	000000

Spline Ratcheting Combination Wrench Sets

A spline-shaped box end turns spline, hex, and 12-point fasteners. This shape also gets a better grip on rounded fasteners that can be difficult to turn with a traditional wrench. These wrenches have a ratchet mechanism that allows you to turn fasteners in tight spaces without removing and repositioning the tool. Wrenches are polished for a mirror-like finish.

For technical drawings and 3-D models, click on a part number.

Box End				Open End
External Hex/12-Point Size	External Spline Size	Head Offset Angle	Turn Required to Ratchet	Size	Opening Angle	Overall Lg.	Material	Container Type		Each
Inch Wrench Sets
11-Piece Sets
1/4" 9/32" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4"	No. 8 No. 9 No. 10 No. 11 No. 12 No. 14 No. 16 No. 18 No. 20 No. 22 No. 24	15°	5°	1/4" 9/32" 5/16" 11/32" 3/8" 7/16" 1/2" 9/16" 5/8" 11/16" 3/4"	15°	4 15/16"-11 1/16"	Chrome-Plated Steel	Plastic Roll-Up Pouch	0000000	0000000

About Torque Tools

Nutdriver Bits

Bit Assortments

Nutdriver Bit Sets

Nutdrivers

Nutdriver Sets

Compact Nutdriver Sets

Torque Screwdriver and Bit Sets

6-Point Sockets

12-Point Sockets

12-Point Flex Sockets

Impact Hex Bit Sockets

6-Point Impact Sockets

Premium 6-Point Socket Sets

Economy 6-Point Socket Sets

Value 6-Point Socket Sets

Premium 12-Point Socket Sets

Impact Hex Bit Socket Sets

6-Point Impact Socket Sets

Spline Ratcheting Combination Wrenches

Spline Ratcheting Combination Wrench Sets