The toughest bits available, these withstand the shock and twisting force of impact drivers. Also known as insert bits, use with a bit adapter in power tools.

Bits have a knurled shank that allows finger tightening. For more torque, use with the included ratcheting bit screwdriver. They will not fit in standard bit screwdrivers.

A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.

Style E have seven interchangeable bits—all of which are compatible with power tools. Store them inside the handle so they don’t get lost or misplaced when you’re not using them. Bits are held in place by magnets. To use these screwdrivers as a nutdriver, remove the bit and turn fasteners with the shaft.

When working in tight spaces, these short drivers fit where others can't. Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible and turns two external hex sizes. Drivers have a cushion grip for comfort and some slip resistance.

Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.

Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque. For those without a voltage detector, bits turn four screw sizes and the shaft two external hex sizes. Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft three external hex sizes.

Cushion-grip drivers offer comfort and some slip resistance. Bits turn eight screw sizes and the shaft three external hex sizes.

Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it to change the tip. Sets include a handle and multiple reversible shafts. The handle has a contoured ultra grip that provides comfort and the best possible grip for achieving maximum torque.

Additional reversible shafts are sold separately.

For technical drawings and 3-D models, click on a part number.

Sets include an assortment of drivers with a rotating end cap on the handle that allows you to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips. They are also known as precision and miniature screwdrivers.

For technical drawings and 3-D models, click on a part number.

The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.

Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.

These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. To adjust torque, remove the black vinyl end cap and turn the attached adjustment key. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.

Note: Accuracy ratings do not apply to the lower 20% of the torque range.

The slim body reaches into tight spots to grip and turn screws. Use the magnet at the end of the handle to retrieve dropped fasteners. Screw starters are not intended for final tightening or removal of fasteners.

Starters with wedge tip fit a variety of drive styles. Push the sleeve on the handle forward and insert the tip into screw head. Pull the sleeve back and the tip splits to hold the screw firmly. Once threads are started, the tool releases the screw.