For Drive Style For Drive Style |
---|
![]() | ![]() | ![]() |
Hex | External Hex | Phillips |
![]() | ![]() | ![]() |
Slotted | Torx | Square |
![]() | ![]() | ![]() |
Tamper- Resistant Hex | Pozidriv® | Tamper- Resistant Torx |
![]() | ![]() | ![]() |
Drilled Spanner | Clutch | Torq- Set® |
![]() | ||
Tri-Wing® |
Size Size | Show |
---|
|
Size Size | Hide |
---|
Individual/Set Individual/Set |
---|
|
Tip Style Tip Style |
---|
![]() | Standard |
Overall Length Overall Length |
---|
|
|
|
Shank Type Shank Type |
---|
![]() | Quick- Change Hex |
![]() | Hex |
Container Type Container Type |
---|
|
Grip Style Grip Style |
---|
![]() | ![]() |
Ultra Grip | Plain |
![]() | |
Cushion |
Maximum Torque Maximum Torque |
---|
|
Torque Adjustability Torque Adjustability |
---|
|
Minimum Torque Minimum Torque |
---|
|
Torque Driver Type Torque Driver Type |
---|
|
Socket Style Socket Style |
---|
![]() | Bit |
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Torque Tools
More
Bit Assortments
These assortments contain general-purpose bits.
Hex shank bits (also known as insert bits) are used in hand drivers or with a bit adapter in power tools.
Hex shank bits for power tools have a groove in the shank and fit directly into power tools without an adapter. They offer more reach for recessed holes and less wobble compared to a hex shank bit used with an adapter.
![]() | ![]() Hex | ![]() Clutch | ![]() Tamper-Resistant Hex | ![]() | ||
![]() Phillips | ![]() Slotted | ![]() Torx | ![]() Clutch | ![]() Square | ||
![]() Drilled Spanner | ![]() Pozidriv® | ![]() Tamper-Resistant Torx | ![]() Torq-Set® | ![]() Tri-Wing® | ![]() External Hex |
No. of Pieces | Components Included | Bits Included | Adapters Included | Drive Tools Included | Each | |
1/4" Hex Shank Size—Steel | ||||||
---|---|---|---|---|---|---|
11 | 10 Bits 1 Adapter | Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 7/32", 1/4", 5/16" (1" O'all Lg.) Torx: T10, T15, T20 (1" O'all Lg.) | 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 000000 |
27 | 25 Bits 1 Adapter 1 Drive Tool | Phillips: No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 5/32", 11/64", 7/32", 1/4", 9/32" (1" O'all Lg.) Hex: 5/64", 3/32", 1/8", 5/32", 3/16" (1" O'all Lg.) Torx: T10, T15, T20, T25, T30, T40 (1" O'all Lg.) Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Clutch: 1/8", 5/32" (1" O'all Lg.) | 2 1/4" Lg. Bit Adapter for Power Tools | 7 3/4" Lg. Bit Screwdriver | 00000000 | 00000 |
30 | 26 Bits 3 Adapters 1 Drive Tool | Tamper-Resistant Hex: 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Tamper-Resistant Torx: T9, T10, T15, T20 T25, T27, T30, T40 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) Torq-Set®: No. 5, No. 8 (1" O'all Lg.) Pozidriv®: No. 2 (1" O'all Lg.) Drilled Spanner: No. 6, No. 8 No. 10 (1" O'all Lg.) Tri-Wing®: No. 4, No. 5 (1" O'all Lg.) | 1/8" Male Square Drive × 1/8" Hex Shank Adapter 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/8" Lg. Bit Adapter for Power Tools | 8 3/4" Lg. Bit Screwdriver | 000000 | 00000 |
35 | 32 Bits 2 Adapters 1 Drive Tool | Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Slotted: 7/32", 1/4" (1" O'all Lg.) Hex (Inch): 1/16", 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.) Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm (1" O'all Lg.) Torx: T8, T10, T15, T20, T25, T27, T30 (1" O'all Lg.) Square: No. 1, No. 2 (1" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 2 1/4" Lg. Bit Adapter for Power Tools | 3 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver | 00000000 | 00000 |
39 | 36 Bits 2 Adapters 1 Drive Tool | Phillips: No. 1, No. 2 (1" O'all Lg.) Slotted: 1/4", 5/16" (1" O'all Lg.) Tamper-Resistant Hex: 5/64", 3/32", 7/64" 1/8", 9/64", 5/32" (1" O'all Lg.) Tamper-Resistant Torx: T8, T10, T15, T20 T25, T27, T30, T40 (1" O'all Lg.) Square: No. 1, No. 2, No. 3 (1" O'all Lg.) Torq-Set®: No. 6, No. 8, No. 10 (1" O'all Lg.) Pozidriv®: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.) Drilled Spanner: No. 4, No. 6, No. 8, No. 10 (1" O'all Lg.) Tri-Wing®: No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.) | 1/4" Female Square Drive × 1/4" Female Hex Adapter 2 1/4" Lg. Bit Adapter for Power Tools | Screwdriver Handle | 0000000 | 00000 |
40 | 37 Bits 2 Adapters 1 Drive Tool | Phillips: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Slotted: 7/64", 5/32", 7/32" (1" O'all Lg.)—1 ea. Slotted: 9/32" (1" O'all Lg.)—2 ea. Hex (Inch): 5/64", 3/32", 7/64", 1/8", 9/64" 5/32", 3/16", 7/32", 1/4" (1" O'all Lg.)—1 ea. Hex (Metric): 2.5 mm, 3 mm, 4 mm 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15, T20, T25, T27 T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2 (1" O'all Lg.)—1 ea. Clutch: 5/32" (1" O'all Lg.)—1 ea. | 1 7/8" Lg. Bit Adapter for Power Tools 1/4" Male Square Drive × 1/4" Hex Shank Adapter | 7 1/2" Lg. Bit Screwdriver | 0000000 | 00000 |
100 | 96 Bits 4 Adapters | Phillips: No. 0 (1" O'all Lg.)—1 ea. Phillips: No. 1, No. 3 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—4 ea. Slotted: 3/32", 1/8", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64" 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 5/16", 3/8" (1" O'all Lg.)—1 ea. Hex (Metric): 1.5 mm, 2 mm, 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 7 mm, 8 mm (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Inch): 3/32" 7/64", 1/8", 9/64", 5/32", 3/16", 7/32" 1/4", 5/16" (1" O'all Lg.)—1 ea. Tamper-Resistant Hex (Metric): 2.5 mm, 3 mm 4 mm, 5 mm, 6 mm, 8 mm (1" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27 T30, T40, T45, T50, T55 (1" O'all Lg.)—1 ea. Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15 T20, T25, T27, T30, T40 (1" O'all Lg.)—1 ea. Square: No. 0, No. 1, No. 2, No. 3, No. 4 (1" O'all Lg.)—1 ea. Pozidriv®: No. 1, No. 2, No. 3 (1" O'all Lg.)—1 ea. Drilled Spanner: No. 4, No. 6, No. 8, No. 10 No. 12, 1/4" (1" O'all Lg.)—1 ea. Screw-In Hook Driver Bit—1 ea. | 1/4" Male Square Drive × 1/4" Hex Shank Adapter (1" O'all Lg.) 1/4" Male Square Drive × 1/4" Hex Shank Adapter (2" O'all Lg.) 2 1/2" Lg. Bit Adapter for Power Tools Bit Adapter for Square Drive Tools | __ | 000000 | 00000 |
1/4" Hex Shank Size for Power Tools—Steel | ||||||
16 | 12 Bits 4 Adapters | Phillips: No. 1, No. 2 (6" O'all Lg.) Phillips: No. 2, No. 3 (3 1/2" O'all Lg.) Torx: T15, T20 (3 1/2" O'all Lg.) Torx: T20, T25, T27, T30 (6" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 3" Lg. Bit Adapter for Power Tools 6" Lg. Bit Adapter for Power Tools | __ | 0000000 | 00000 |
34 | 29 Bits 5 Adapters | Phillips: No. 1, No. 2, No. 3 (2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (3 1/2" O'all Lg.) Phillips: No. 1, No. 2, No. 3 (6" O'all Lg.) Torx: T8, T9, T10 (2" O'all Lg.) Torx: T15, T20, T25, T27, T30 (6" O'all Lg.) Torx: T15, T20, T25, T30 (3 1/2" O'all Lg.) Pozidriv®: No. 1, No. 2, No. 3 (2" O'all Lg.) Pozidriv®: No. 2 (3 1/2" O'all Lg.) Pozidriv®: No. 2 (6" O'all Lg.) External Hex: 3/8", 1/2" (1 3/4" O'all Lg.) External Hex: 5/16" (1 5/8" O'all Lg.) | 1/4" Male Square Drive × 1/4" Hex Shank Adapter 3/8" Male Square Drive × 1/4" Hex Shank Adapter 1/2" Male Square Drive × 1/4" Hex Shank Adapter 2 3/8" Lg. Bit Adapter for Power Tools | __ | 0000000 | 000000 |
50 | 50 Bits | Phillips: No. 0, No. 1, No. 2, No. 3, No. 4 (2" O'all Lg.)—1 ea. Slotted: 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" 9/32", 5/16" (2" O'all Lg.)—1 ea. Hex (Inch): 0.050", 1/16", 5/64", 3/32", 7/64", 1/8" 9/64", 3/16", 7/32", 1/4" (2" O'all Lg.)—1 ea. Hex (Inch): 5/32" (2" O'all Lg.)—2 ea. Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm 6 mm, 8 mm (2" O'all Lg.)—1 ea. Torx: T5, T6, T7, T8, T9, T10, T15, T20, T27 T30, T40 (2" O'all Lg.)—1 ea. Torx: T25 (2" O'all Lg.)—2 ea. Square: No. 0, No. 1, No. 2, No. 3 No. 4 (2" O'all Lg.)—1 ea. | __ | __ | 000000 | 000000 |
1/4" and 5/16" Hex Shank Size—Steel | ||||||
35 | 32 Bits 1 Extension 2 Drive Tools | Phillips 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Slotted 1/4" Hex Shank: 3/16", 1/4", 9/32" (1" O'all Lg.) Hex 1/4" Hex Shank: 5/64", 3/32", 7/64", 1/8" 9/64", 7/32", 1/4" (1" O'all Lg.) Hex 5/16" Hex Shank: 5/32", 3/16" (1 1/4" O'all Lg.) Torx 1/4" Hex Shank: T10, T15, T20, T25, T27 T30 (1" O'all Lg.) Torx 5/16" Hex Shank: T40, T45, T50 (1 1/4" O'all Lg.) Square 1/4" Hex Shank: No. 1, No. 2, No. 3 (1" O'all Lg.) Pozidriv® 1/4" Hex Shank: No. 1, No. 2 (1" O'all Lg.) Clutch 1/4" Hex Shank: 3/32", 1/8", 5/32" 3/16" (1" O'all Lg.) | __ | 5 3/8" Lg. Angled Tight-Clearance Ratcheting Bit Screwdriver 5 1/2" Lg. Tight-Clearance Ratcheting Bit Screwdriver | 00000000 | 000000 |
Bit Assortments for Impact Drivers





The toughest bits available, these withstand the shock and twisting force of impact drivers. Also known as insert bits, use with a bit adapter in power tools.
No. of Pieces | Components Included | Bits Included | Adapters Included | Bit-Holding Mechanism | Material | Container Type | Each | |
1/4" Hex Shank Size | ||||||||
---|---|---|---|---|---|---|---|---|
30 | 29 Bits 1 Adapter | Phillips: No. 1 (1" O'all Lg.)—2 ea. Phillips: No. 2 (1" O'all Lg.)—3 ea. Phillips: No. 3 (1" O'all Lg.)—2 ea. Hex: 3 mm, 4 mm, 5 mm, 6 mm (1" O'all Lg.)—1 ea. Torx: T10, T15 (1" O'all Lg.)—1 ea. Torx: T20, T30, T40 (1" O'all Lg.)—2 ea. Torx: T25 (1" O'all Lg.)—3 ea. Pozidriv®: No. 2 (1" O'all Lg.)—3 ea. Pozidriv®: No. 1, No. 3 (1" O'all Lg.)—2 ea. | 1/4" Female Hex × 1/4" Male Hex for Power Tools | Magnet, Retaining Ring | Diamond-Coated Steel | Plastic Case | 0000000 | 0000000 |
Tight-Clearance Ratcheting Bit Screwdrivers






A ratchet mechanism allows you to drive fasteners when there's little space to move the handle.
Style E have seven interchangeable bits—all of which are compatible with power tools. Store them inside the handle so they don’t get lost or misplaced when you’re not using them. Bits are held in place by magnets. To use these screwdrivers as a nutdriver, remove the bit and turn fasteners with the shaft.
Material | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Style | For Bit Hex Shank Size | Number of Sizes | Sizes Included | Overall Lg. | Bit-Holding Mechanism | Bit | Handle | Features | Each | |
E | 1/4" | 8 | External Hex: 1/4" Phillips: No. 1, No. 2 Slotted: 1/4", 3/16" Square: No. 1, No. 2 Torx: T15 | 4 5/8" | Magnet | Steel | Plastic | Bit storage inside tool | 00000000 | 000000 |
Reversible-Bit Screwdriver/Nutdrivers







Bits have a different tip at each end and snap into the shaft. A ball detent holds the bit in place. To use as nutdriver, remove the bit and turn fasteners with the shaft, which is also reversible.
Ultra-grip drivers have a multicomponent handle that provides comfort and the best possible grip for achieving maximum torque. Those with a voltage detector safely test for AC voltage without contacting live wires. Light and sound indicators alert you when over 50 volts AC is detected. The detector is attached to the tool’s handle; remove it from the handle to use it on its own. Bits turn eight screw sizes and the shaft three external hex sizes.
Cushion-grip drivers offer comfort and some slip resistance. Bits turn eight screw sizes and the shaft three external hex sizes.
Shaft | Material | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Bit Hex Shank Size | No. of Sizes | Sizes Included | Overall Lg. | Lg. | O'all Wd. | Bit-Holding Mechanism | Shaft | Bit | Handle | Batteries Included | Specifications Met | Features | Each | |
Ultra Grip | ||||||||||||||
1/4", 5/16" | 10 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 External Hex: 1/4", 5/16" | 9" | 3 3/8" | 1 1/4" | Ball Detent | Plastic-Coated Steel | Steel | Plastic | Yes | C-UL Listed, UL Listed | Bit storage inside shaft, Bit storage inside tool, Voltage Detector | 0000000 | 000000 |
Cushion Grip | ||||||||||||||
1/4", 5/16" | 11 | Phillips: No. 1, No. 2 Slotted: 3/16", 1/4" Torx: T10, T15 Square: No. 1, No. 2 External Hex: 1/4" External Hex: 5/16", 3/8" | 7" | 2 1/2" | 17/32" | Ball Detent | Chrome-Plated Steel | Steel | Plastic | __ | __ | Bit storage inside shaft | 0000000 | 00000 |
Adjustable-Length Screwdriver Sets
Press down on the handle’s collar to either adjust the shaft length or remove the shaft and replace it to change the tip. Sets include a handle and multiple reversible shafts. The handle has a contoured ultra grip that provides comfort and the best possible grip for achieving maximum torque.
Additional reversible shafts are sold separately.
For technical drawings and 3-D models, click on a part number.





Number of Pieces | Components Included | Sizes Included | Overall Lg. | Material | Handle Material | Container Type | Each | |
15 | 14 Reversible Shafts 1 Screwdriver Handle | Phillips: No. 1, No. 2 Slotted: 9/64", 3/16", 7/32", 17/64" Hex (Inch): 3/32", 7/64", 1/8", 9/64", 5/32", 3/16" Hex (Metric): 2 mm, 2.5 mm, 3 mm, 4 mm, 5 mm, 6 mm Tamper-Resistant Torx: T6, T7, T8, T9, T10, T15, T20, T25, T30, T40 | 6 1/4"-9 1/4" | Chrome-Plated Steel | Plastic | Canvas Pouch | 000000 | 0000000 |
Size | Overall Lg. | Each | |
Phillips and Slotted | |||
---|---|---|---|
1/8" × No. 0 | 6" | 0000000 | 00000 |
5/32" × No. 1 | 6" | 0000000 | 0000 |
1/4" × No. 2 | 6" | 0000000 | 0000 |
Hex | |||
3/32" × 7/64" | 6" | 0000000 | 0000 |
1/8" × 9/64" | 6" | 0000000 | 0000 |
5/32" × 3/16" | 6" | 0000000 | 0000 |
2 mm × 2.5 mm | 6" | 0000000 | 0000 |
3 mm × 4 mm | 6" | 0000000 | 0000 |
5 mm × 6 mm | 6" | 0000000 | 0000 |
Tamper-Resistant Torx | |||
T6 × T8 | 6" | 0000000 | 00000 |
T7 × T9 | 6" | 0000000 | 00000 |
T10 × T15 | 6" | 0000000 | 00000 |
T20 × T25 | 6" | 0000000 | 00000 |
T30 × T40 | 6" | 0000000 | 00000 |
Square | |||
No. 1 × No. 2 | 6" | 0000000 | 00000 |
Static-Control Precise-Control Screwdriver Sets






The handle on these assorted ESD-safe screwdrivers drains static away from your application, preventing buildup from electrostatic discharge (ESD) that can damage sensitive equipment. They meet IEC 61340-5-1 requirements for protecting electronic devices from electrostatic discharge. Press the rotating end cap on the handle to apply constant pressure with your palm while turning the body of the screwdriver with your fingertips.
Warning: Because the handle conducts electricity, screwdrivers must not come in contact with sources of electrical power.
Number of Pieces | Includes | Material | Handle Material | Surface Resistivity, ohms | Each | |
50 | Phillips Screwdrivers: No. 000, No. 00, No. 0, No. 1 Slotted Screwdrivers: 0.031", 0.039", 0.047", 0.059", 0.079", 0.098", 0.118", 0.138", 0.157" Hex Screwdrivers (Inch): 1/16", 3/32", 7/64", 1/8" Hex Screwdrivers (Metric): 0.7 mm, 0.9 mm, 1.3 mm, 1.5 mm, 2 mm, 2.5 mm, 3 mm Torx Screwdrivers: T1, T2, T3, T4, T5, T6, T7, T8, T9, T10, T15, T20 Nutdrivers: (Metric) 1.5 mm, 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 mm, 4.5 mm, 5 mm, 5.5 mm; (Inch): 1/8", 5/32", 3/16", 1/4" 5 3/4" Lg. Chip Lifter | Chrome-Plated Steel | Plastic | 106-109 | 0000000 | 0000000 |
Torque Screwdriver and Bit Sets


These sets include an adjustable torque driver, bits for different drive styles, and a socket adapter. Turn the collar on the driver to adjust torque. When set torque is reached, the driver slips to disengage and stop turning the fastener, preventing overtightening. Sets come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Shaft | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
No. of Pieces | Includes | Torque Range | Graduations | For Bit Hex Shank Size | Torque-Limiting Direction | Clockwise Accuracy | O'all Lg. | Material | Handle | Certification | Each | |
Slip-Release Torque Limiter | ||||||||||||
in.-lbs., Nm | ||||||||||||
29 | 26 Bits 1 Adapter 1 Extension 1 Drive Tool 1/4” Square Drive Socket Adapter Screwdriver Bit Extension Torque-Limiting Screwdriver | 2-36 in.-lbs. 0.2-4 Nm | 2 in.-lbs. 0.2 Nm | 1/4" | Clockwise | ±6% | 7 3/4" | Aluminum | Aluminum | Calibration Certificate with Test Data Traceable to NIST | 0000000 | 0000000 |
Tight-Clearance Screw Starters
The slim body reaches into tight spots to grip and turn screws. Use the magnet at the end of the handle to retrieve dropped fasteners. Screw starters are not intended for final tightening or removal of fasteners.
Starters with wedge tip fit a variety of drive styles. Push the sleeve on the handle forward and insert the tip into screw head. Pull the sleeve back and the tip splits to hold the screw firmly. Once threads are started, the tool releases the screw.





Size | For Screw Size | Overall Lg. | Body Dia. | Material | Finish | Handle Material | Features | Each | |
Phillips, Hex, Torx, Square | |||||||||
---|---|---|---|---|---|---|---|---|---|
3/32", 7/64", 1/8", 9/64", 5/32", 3/16", 7/32", 1/4", No. 1, No. 2, No. 3, T10, T15, T20, T27, T30 | 1/4", 3/8", 5/16", No. 4, No. 5, No. 6, No. 7, No. 8, No. 9, No. 10, No. 11, No. 12 | 5 5/8" | 0.3" | Steel | Black | Aluminum | Screw Retrieval Magnet, Pocket Clip | 00000000 | 00000 |
Hex, Torx, Phillips, and Slotted Bit Socket Assortments
![]() | ![]() Hex | ![]() Slotted |
![]() Phillips | ![]() Torx |
No. of Pieces | Includes | Overall Lg. | Material | Each | |
1/4", 3/8" Square Drive | |||||
---|---|---|---|---|---|
32 | 3/8" Hex Sockets (Inch): 1/8", 9/64", 5/32", 3/16", 7/32", 1/4" (1 7/8" O'all Lg.); 5/16", 3/8" (2" O'all Lg.) 3/8" Hex Sockets (Metric): 4 mm, 5 mm, 6 mm, 7 mm (1 7/8" O'all Lg.); 8 mm, 9 mm, 10 mm (2" O'all Lg.) 1/4" Torx Sockets: T10, T15, T20, T25, T27, T30 (1 7/16" O'all Lg.) 3/8" Torx Sockets: T40, T45, T47, T50 (2" O'all Lg.) 3/8" Phillips Sockets: No. 1, No. 2, No. 3 (1 7/8" O'all Lg.) 3/8" Slotted Sockets: 3/16" (1" O'all Lg.); 1/4", 5/16" (1 7/8" O'all Lg.); 3/8" (1" O'all Lg.) | 1"-2" | Chrome-Plated Steel | 0000000 | 000000 |