Shank Thread Size Shank Thread Size |
|---|
Rod End Type Rod End Type |
|---|
 | Ball Joint Linkage |
Shank Gender Shank Gender |
|---|
 | Female |
Shank Thread Direction Shank Thread Direction |
|---|
|
Ball Stud Thread Size Ball Stud Thread Size |
|---|
Ball Stud Thread Direction Ball Stud Thread Direction |
|---|
|
Ball Stud Length Ball Stud Length |
|---|
Shank Center Length Shank Center Length |
|---|
Shank Thread Length Shank Thread Length |
|---|
|
|
|
Lubrication Lubrication |
|---|
|
Ball Stud Center Length Ball Stud Center Length |
|---|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
Ball Stud Material Ball Stud Material |
|---|
|
Shank Threading Shank Threading |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Finish Finish |
|---|
|
Ball Stud Finish Ball Stud Finish |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
About Rod Ends
More
Internally Threaded Ball Joint Linkages
Without Seal
With Seal
Able to stand up to frequent use, these linkages offer excellent wear resistance. They consist of ball joint rod ends with a ball stud attached to simplify mounting. The stud is machined to fit perfectly inside its housing and swivel in all directions—good for clutches, throttles, and shift control rods. Periodic lubrication may be required to keep them operating smoothly.
Linkages with seal have a seal to keep lubricant in and dirt out.
For technical drawings and 3-D models, click on a part number.
Shank | Ball Stud | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Thread Size | Center Lg. | Thread Lg. | Thread Size | Center Lg. | Lg. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
Right-Hand Threaded Ball Stud | ||||||||||
Ball Joint Linkages | ||||||||||
Right-Hand Threaded Shank | ||||||||||
| 10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 45° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 40° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 42° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 7/16"-20 | 1 13/16" | 15/16" | 7/16"-20 | 1 3/4" | 1 1/16" | 44° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 48° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 5/8"-18 | 2 1/2" | 1 3/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 52° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 3/4"-16 | 2 7/8" | 1 9/16" | 3/4"-16 | 3" | 1 13/16" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
| 10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 45° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 40° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 42° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 7/16"-20 | 1 13/16" | 15/16" | 7/16"-20 | 1 3/4" | 1 1/16" | 44° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 48° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 5/8"-18 | 2 1/2" | 1 3/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 52° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 3/4"-16 | 2 7/8" | 1 9/16" | 3/4"-16 | 3" | 1 13/16" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
Ball Joint Linkages with Neoprene Rubber Seal | ||||||||||
Right-Hand Threaded Shank | ||||||||||
| 10-32 | 7/8" | 7/16" | 10-32 | 7/8" | 7/16" | 35° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
| 1/4"-28 | 1" | 1/2" | 1/4"-28 | 1" | 9/16" | 35° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
| 5/16"-24 | 1 1/8" | 9/16" | 5/16"-24 | 1 3/16" | 11/16" | 35° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
| 3/8"-24 | 1 3/8" | 3/4" | 3/8"-24 | 1 9/16" | 7/8" | 35° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 0000 |
| 7/16"-20 | 1 15/16" | 1" | 7/16"-20 | 2" | 1 1/8" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| 1/2"-20 | 1 15/16" | 1" | 1/2"-20 | 2" | 1 1/8" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M6 × 1 mm | 25mm | 13mm | M6 × 1 mm | 26mm | 14mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M8 × 1.25 mm | 28.5mm | 14mm | M8 × 1.25 mm | 31mm | 17.5mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M10 × 1.5 mm | 35mm | 19mm | M10 × 1.5 mm | 40mm | 22mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M12 × 1.75 mm | 49mm | 25mm | M12 × 1.75 mm | 51mm | 28.5mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 0000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
| 10-32 | 7/8" | 7/16" | 10-32 | 7/8" | 7/16" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| 1/4"-28 | 1" | 1/2" | 1/4"-28 | 1" | 9/16" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| 5/16"-24 | 1 1/8" | 9/16" | 5/16"-24 | 1 3/16" | 11/16" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| 3/8"-24 | 1 3/8" | 3/4" | 3/8"-24 | 1 9/16" | 7/8" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| 7/16"-20 | 1 15/16" | 1" | 7/16"-20 | 2" | 1 1/8" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| 1/2"-20 | 1 15/16" | 1" | 1/2"-20 | 2" | 1 1/8" | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M6 × 1 mm | 25mm | 13mm | M6 × 1 mm | 26mm | 14mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M8 × 1.25 mm | 28.5mm | 14mm | M8 × 1.25 mm | 31mm | 17.5mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
| M10 × 1.5 mm | 35mm | 19mm | M10 × 1.5 mm | 40mm | 22mm | 35° | Not Rated | Zinc-Plated Carbon Steel | 00000000 | 0000 |
Ball Joint Linkages with Blended Rubber Seal | ||||||||||
Right-Hand Threaded Shank | ||||||||||
| M5 × 0.8 mm | 30mm | 16mm | M5 × 0.8 mm | 25mm | 10mm | 34° | 260 | Zinc | 0000000 | 00000 |
| M6 × 1 mm | 30mm | 16mm | M6 × 1 mm | 25mm | 10mm | 34° | 370 | Zinc | 0000000 | 00000 |
| M8 × 1.25 mm | 36mm | 19mm | M8 × 1.25 mm | 31.5mm | 12.5mm | 34° | 980 | Zinc | 0000000 | 00000 |
| M10 × 1.25 mm | 43mm | 23mm | M10 × 1.25 mm | 37mm | 17mm | 34° | 1,650 | Zinc | 0000000 | 00000 |
| M10 × 1.5 mm | 43mm | 23mm | M10 × 1.5 mm | 37mm | 17mm | 34° | 1,650 | Zinc | 0000000 | 00000 |
| M12 × 1.75 mm | 50mm | 27mm | M12 × 1.75 mm | 50mm | 20mm | 34° | 2,200 | Zinc | 0000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
| M5 × 0.8 mm | 30mm | 16mm | M5 × 0.8 mm | 25mm | 10mm | 34° | 260 | Zinc | 0000000 | 00000 |
| M6 × 1 mm | 30mm | 16mm | M6 × 1 mm | 25mm | 10mm | 34° | 370 | Zinc | 0000000 | 00000 |
| M8 × 1.25 mm | 36mm | 19mm | M8 × 1.25 mm | 31.5mm | 12.5mm | 34° | 980 | Zinc | 0000000 | 00000 |
| M10 × 1.25 mm | 43mm | 23mm | M10 × 1.25 mm | 37mm | 17mm | 34° | 1,650 | Zinc | 0000000 | 00000 |
| M10 × 1.5 mm | 43mm | 23mm | M10 × 1.5 mm | 37mm | 17mm | 34° | 1,650 | Zinc | 0000000 | 00000 |
| M12 × 1.75 mm | 50mm | 27mm | M12 × 1.75 mm | 50mm | 20mm | 34° | 2,200 | Zinc | 0000000 | 00000 |
Left-Hand Threaded Ball Stud | ||||||||||
Ball Joint Linkages | ||||||||||
Right-Hand Threaded Shank | ||||||||||
| 10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 45° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 40° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 42° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 7/16"-20 | 1 13/16" | 15/16" | 7/16"-20 | 1 3/4" | 1 1/16" | 44° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 48° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 5/8"-18 | 2 1/2" | 1 3/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 52° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 3/4"-16 | 2 7/8" | 1 9/16" | 3/4"-16 | 3" | 1 13/16" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
Left-Hand Threaded Shank | ||||||||||
| 10-32 | 1 1/16" | 1/2" | 10-32 | 1 1/64" | 1/2" | 45° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 1/4"-28 | 1 5/16" | 11/16" | 1/4"-28 | 1 1/32" | 9/16" | 40° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 5/16"-24 | 1 3/8" | 11/16" | 5/16"-24 | 1 7/32" | 11/16" | 42° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 0000 |
| 3/8"-24 | 1 5/8" | 13/16" | 3/8"-24 | 1 9/16" | 29/32" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 7/16"-20 | 1 13/16" | 15/16" | 7/16"-20 | 1 3/4" | 1 1/16" | 44° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 1/2"-20 | 2 1/8" | 1 1/16" | 1/2"-20 | 2" | 1 1/8" | 48° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 5/8"-18 | 2 1/2" | 1 3/8" | 5/8"-18 | 2 1/2" | 1 1/2" | 52° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |
| 3/4"-16 | 2 7/8" | 1 9/16" | 3/4"-16 | 3" | 1 13/16" | 46° | Not Rated | Zinc-Plated Carbon Steel | 000000000 | 00000 |