Hinge leaves fit into two cutouts (mortises) to mount flush with the door and frame.

Turn a set screw to adjust the door up or down after it's hung.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

These hinges are made of metal.

Thick leaves and a large diameter pin make these hinges good for use with heavy doors.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Springs in these hinges without holes automatically swing doors and gates closed behind you.

After a light push on the door, springs in these hinges swing doors and gates fully open.

Only one cutout (mortise) is needed for these hinges—the offset design allows surface mounting the door leaf and mortise mounting the frame leaf.

Tighten or loosen an adjustment screw to change the hinge resistance.

These hinges allow 360° of motion.

In addition to rotating 360°, these hinges tilt up and down.

These hinges without holes are spring loaded—pull the handle to retract the pin and disconnect a door; release the handle and the pin snaps back.

A keeper holds the pin in a retracted position to make reconnecting doors easier than other pull-release quick-disconnect hinges.

To retract the pin and disconnect a door, squeeze the hinge handles together. Release the handles and the pin snaps back.

A stop keeps these hinges open at a set angle; push past the stop to open them to 180°.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

No need for oil or grease, these hinges are maintenance free. The mounting holes form an industry-standard half-moon shape.

These hinges are completely hidden when the door is closed.

Bearings allow these hinges to open and close doors smoothly.

The mounting hole pattern does not follow an industry standard, which means you can work around worn mounting holes when replacing template hinges.

Longer than other entry door hinges, these piano-style hinges run the entire length of doors for strength and durability.

The hinge pin is permanently attached to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Keep environments free of contaminants—with plastic hinge leaves and a metal pin, there's no metal-to-metal contact that can release particles as hinges open and close.

The hinge leaves fit in cutouts (mortises) on the edge of a door.

Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

Stronger than metal and plastic hinges, these are the lightest weight hinges we offer.

Mounting slots allow door alignment adjustments during and after hinge installation.

When the door is closed, the distance between the leaves is larger than the pin diameter, creating an offset to accommodate a gasket or trim.

Plastic hinges are a lightweight alternative to metal hinges and provide smooth, silent operation.

A spring in these hinges automatically swings doors and gates closed behind you.

The hinge pin attaches to the frame leaf so you can quickly lift the door off the hinge without removing the pin.

Wide hinge leaves provide a large mounting surface to keep trailer doors from sagging.

These hinges have a standard range of motion of 100° to 120°.

With a 170° range of motion, these hinges are for doors that need to open wide.

Hinge leaves fit into two cutouts (mortises) to mount flush with door and frame edges.

Easier to install than other mortise-mount concealed cabinet hinges, these fit in two drilled holes.

When the cabinet door is closed, a portion of the frame leaf is exposed and the entire door leaf is hidden

Surface-mount these hinges to the side of a cabinet.

Turn the padlock eye to fasten these hasps without a padlock.

Install these hasps over a cam lock and secure them with a padlock to increase security on cabinets and chests.

Mount these hasps around complex curves, angles, and corners that other corner hasps can't reach.

Mount these padlockable eyes to the front of a door and door frame.

Backing plates provide added support to these face-mount padlockable eyes. Mount them to the front of a door and door frame.