Material Material |
|---|
|
Overall Width Overall Width | Show |
|---|
|
Overall Width Overall Width | Hide |
|---|
Mounting Holes Mounting Holes |
|---|
 |  |
| With Holes | Without Holes |
Capacity Capacity |
|---|
|
Mounting Style Mounting Style |
|---|
 | Surface |
Pin Material Pin Material |
|---|
|
Pin Type Pin Type |
|---|
 | Nonremovable |
Opening/Closing Action Opening/Closing Action |
|---|
|
Daily Openings Daily Openings |
|---|
|
Door Mounting Location Door Mounting Location |
|---|
|
Finish Finish |
|---|
|
Mounting Hole Style Mounting Hole Style |
|---|
|
About Hinges
More
Adjustable Heavy Duty Hinges with Holes
Turn a set screw to adjust the door 1/8" up or down after it's hung. Thick leaves and a large diameter pin make these hinges good for use with heavy doors. Bearings allow them to open and close doors smoothly. All of these hinges are load rated; capacity is based on two hinges per door. They have a nonremovable pin to deter tampering. To choose a door mounting location, stand on the push side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Daily Openings | Capacity, lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Each | |
Left Side Door Mounting Location | |||||||||||||||
Primed Low-Carbon Steel | |||||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1/2" | Steel | No | 6 | 3/8" | 0000000 | 0000000 |
304 Stainless Steel | |||||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1" | 304 Stainless Steel | No | 6 | 7/16" | 0000000 | 000000 |
Right Side Door Mounting Location | |||||||||||||||
Primed Low-Carbon Steel | |||||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1/2" | Steel | No | 6 | 3/8" | 0000000 | 000000 |
304 Stainless Steel | |||||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1" | 304 Stainless Steel | No | 6 | 7/16" | 0000000 | 000000 |
Adjustable Heavy Duty Hinges without Holes
Turn a set screw to adjust the door 1/8" up or down after it's hung. Thick leaves and a large diameter pin make these hinges good for use with heavy doors. Bearings allow the hinges to open and close heavy doors smoothly. The hinges are load rated; capacity is based on two hinges per door. All have a nonremovable pin to deter tampering. To choose a door mounting location, stand on the push side of the door—use a right-side hinge if the hinge is on the right or a left-side hinge if it’s on the left.
304 stainless steel hinges are more corrosion resistant than primed low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Daily Openings | Capacity, lbs. | Pin Dia. | Pin Material | Each | |
Left Side Door Mounting Location | ||||||||||||
Primed Low-Carbon Steel | ||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1/2" | Steel | 0000000 | 0000000 |
304 Stainless Steel—Dull | ||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1/2" | Steel | 00000000 | 000000 |
Right Side Door Mounting Location | ||||||||||||
Primed Low-Carbon Steel | ||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1/2" | Steel | 0000000 | 000000 |
304 Stainless Steel—Dull | ||||||||||||
| 5" | 2 1/8" | 5" | 2 1/8" | 4 1/4" | 0.375" | 180° | 270 | 1,000 | 1/2" | Steel | 00000000 | 000000 |
Strap Hinges
These hinges have wide hinge leaves that provide a large mounting surface to keep doors and gates from sagging. All have a nonremovable pin to deter tampering.
304 stainless steel hinges are more corrosion resistant than galvanized low-carbon steel. They also have good chemical resistance.
For technical drawings and 3-D models, click on a part number.
Door Leaf | Frame Leaf | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Capacity, lbs. | Pin Dia. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Screw Size | Each | ||
304 Stainless Steel—Polished | |||||||||||||||
| 2 | 1 1/2" | 3" | 2 1/8" | 1 1/4" | 4 1/4" | 0.060" | 250° | Not Rated | 1/8" | 304 Stainless Steel | No | 5 | No. 8 | 0000000 | 00000 |