About Hinges
More
About Door Closers
When replacing an existing closer, remove the cover and match the model number and/or mounting hole pattern to a closer in our offering. Or, use one of our closers and a universal mounting plate that matches most hole patterns.
If you are installing a new closer, choose one that works for your door width. Due to added resistance from wind, closers typically accommodate smaller exterior doors than interior doors.
There are three typical mounting positions for door closers; many of our closers are versatile and can be mounted in any of these positions. To determine opening direction, stand on the side of the door where the closer will be mounted. If the door opens towards you it opens in; opens away from you it opens out.
Door Mount, Opens In—Also known as regular arm mount, this position allows the door to open in toward the closer.
Door Mount, Opens Out—Also known as parallel arm mount, the arm lays parallel with the door in the closed position.
Frame Mount, Opens Out—Also known as top frame mount, this position is often used for exterior doors.
Toilet Partition Door Pivot Hinges
Designed to wrap around the edge of the partition frame, these hinges provide a stronger hold than other toilet partition door hinges. Also known as gravity hinges, the weight of the door returns these hinges to a closed position without the help of springs. Hinge pins fit into cutouts (mortises) in doors. A pair includes one hinge for the top of the door and one for the bottom of the door.
Frame Leaf | Pin Offset | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Door Thick. | Ht. | Wd. | Range of Motion | Pin Dia. | Top | Bottom | Pin Material | Mounting Fasteners Included | Pair | |
For Plastic Doors | ||||||||||
Chrome-Plated Zinc—Polished | ||||||||||
| 7/8" | 2 1/4" | 1" | 110° | 3/8" | 1 1/4" | 1 1/4" | Steel | Yes | 00000000 | 000000 |
| 1" | 2 1/4" | 1" | 110° | 3/8" | 1 1/4" | 1 1/4" | Steel | Yes | 00000000 | 00000 |
For Steel Doors | ||||||||||
Chrome-Plated Zinc—Polished | ||||||||||
| 1" | 2 3/16" | 11/16" | 110° | 3/8" | 1 1/8" | 1 1/16" | Steel | Yes | 00000000 | 00000 |
Half-Mortise Concealed Cabinet Hinges
Also known as European hinges, only one cutout (mortise) is needed for these hinges—mount the frame leaf to the inside cabinet wall and mount the door leaf into a recessed cutout (mortise) on the inside of the cabinet door. Once mounted, the hinges will be completely hidden from the outside when the door is closed. They are commonly found on washroom and kitchen cabinetry. All of these hinges have a nonremovable pin to deter tampering.
Nickel-plated steel hinges have mild corrosion resistance. These hinges also have a quick-release clip for easy door removal.
Hinges for half overlay doors are for doors that cover half of their frame.
For Cutout | Door Leaf | Frame Leaf | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dp. | Dia. | Ht. | Wd. | Ht. | Wd. | O'all Wd. | Range of Motion | Capacity, lbs. | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Features | Each | |
For Half Overlay Door—Standard | |||||||||||||||
Nickel-Plated Steel—Dull | |||||||||||||||
| 1/2" | 1 3/8" | 2 1/4" | 1 7/16" | 2 1/4" | 3 1/16" | 4 15/32" | 110° | 15 | Steel | Yes | 4 | Countersunk | Quick-Release Clip | 000000 | 00000 |
Glass Cabinet Hinges
Surface-mount these hinges to the side of a cabinet to create free-swinging glass doors. All of these hinges have a nonremovable pin to deter tampering. A pair is for one door and includes one top and one bottom hinge for mounting to the top and bottom of the door.
Chrome-plated steel hinges have mild corrosion resistance.
Door Leaf | Frame Leaf | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | Ht. | Wd. | Leaf Thick. | Range of Motion | Pin Material | Mounting Fasteners Included | No. of Mounting Holes | Mounting Hole Style | Mounting Screw Size  | Pair | |
Chrome-Plated Steel—Polished | |||||||||||||
| 1/4" | 3/4" | 1 1/4" | 19/32" | 1 1/2" | 0.078" | 110° | Steel | No | 4 | Straight | No. 4 | 00000000 | 00000 |
Glass Cabinet Pivot Hinges
Slip the hinge pins into 11/32" Dia. × 5/16" Dp. holes in a cabinet to create free-swinging glass doors. All of these hinges have a nonremovable pin to deter tampering. A pair is for one door and includes one top and one bottom hinge for mounting to the top and bottom of the door.
Brass- and chrome-plated steel have more corrosion resistance than painted steel.
Door Leaf | Frame Hole | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. Door Thick. | Ht. | Wd. | O'all Wd. | Leaf Thick. | Range of Motion | Pin Dia. | Pin Material | Dia. | Dp. | Mounting Fasteners Included | Pair | |
Brass-Plated Steel—Dull | ||||||||||||
| 1/4" | 13/16" | 1 1/2" | 1 15/16" | 0.060" | 110° | 13/64" | Steel | 11/32" | 5/16" | Yes | 00000000 | 00000 |
Chrome-Plated Steel—Polished | ||||||||||||
| 1/4" | 1/2" | 1 11/32" | 1 9/16" | 0.080" | 110° | 13/64" | Steel | 11/32" | 5/16" | Yes | 00000000 | 0000 |
| 1/4" | 13/16" | 1 1/2" | 1 15/16" | 0.060" | 110° | 13/64" | Steel | 11/32" | 5/16" | Yes | 00000000 | 0000 |
Black Painted Steel | ||||||||||||
| 1/4" | 25/32" | 1 3/16" | 1 9/16" | 0.080" | 110° | 13/64" | Steel | 11/32" | 5/16" | Yes | 00000000 | 0000 |
Sectional Door Hinges
Designed to fit most overhead sectional doors, such as garage doors, these hinges are sized to industry standards. They all have a nonremovable pin to deter tampering.
| Garage Door Hinge Trade Size | Lg. | Wd. | Ht. | Range of Motion | Pin Material | Mounting Fasteners Included | Mounting Screw Size | No. of Mounting Holes | Mounting Hole Style | Each | |
Galvanized Steel—Dull | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
0.12" Leaf Thick. | |||||||||||
| 3 | 7 5/16" | 2 13/16" | 1 3/4" | 110° | Steel | No | 1/4" | 9 | Straight | 00000000 | 00000 |
| 6 | 7 5/16" | 2 13/16" | 2 1/2" | 110° | Steel | No | 1/4" | 9 | Straight | 00000000 | 0000 |
High-Traffic Door Closers
For frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.
To determine door swing direction, stand on the side of the door where it swings away from you. If it opens to the right, select a right closer; if it opens to the left, select a left closer. Reversible closers are for right or left door-swing directions.
Free-moving closers pull doors shut after you've opened them.
Hold-open closers hold doors open until you close them with a slight push or pull on the door.
For Door Wd. | Opening Direction | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Interior | Exterior | For Door Swing Direction | Opening/Closing Action | Door Mount | Range of Motion | Mounting Hardware Included | Specifications Met | Finish | Each | |
Norton 8501 | ||||||||||
| 28"-48" | 28"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 0000000 |
| 28"-48" | 28"-48" | Reversible | Hold Open | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
High-Traffic Door Closers with Built-In Stop
A built-in stop prevents doors from opening too far—good when wall- or floor-stops can’t be used. Designed for frequently used doors, these closers last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. These closers are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.
Free-moving closers pull doors shut after you've opened them.
Hold-open closers hold doors open until you close them with a slight push or pull on the door.
For Door Wd. | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Interior | Exterior | For Door Swing Direction | Opening/Closing Action | Door Mount Opening Direction | Range of Motion | Mounting Hardware Included | Specifications Met | Choose a Finish | Each | |
Norton CLP 1601 | ||||||||||
| 28"-48" | 28"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 00000000 | 0000000 | |
| 28"-48" | 28"-48" | Reversible | Hold Open | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 | 00000000 | 000000 | |
Norton CLP 7500 | ||||||||||
| 30"-48" | 32"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 00000000 | 000000 | |
| 30"-48" | 32"-48" | Reversible | Hold Open | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 | 00000000 | 000000 | |
Norton CLP 8301 | ||||||||||
| 28"-48" | 28"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 00000000 | 000000 | |
| 28"-48" | 28"-48" | Reversible | Hold Open | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 | 00000000 | 000000 | |
LCN 1450 | ||||||||||
| 24"-60" | 24"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 0000000 | 000000 |
LCN 4040XP | ||||||||||
| 24"-60" | 24"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 0000000 | 000000 | |
| 24"-60" | 24"-48" | Reversible | Hold Open | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 | 0000000 | 000000 | |
LCN 4050 | ||||||||||
| 24"-60" | 24"-48" | Reversible | Free Moving | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 0000000 | 000000 |
High-Traffic Door Closers with Shock-Absorbing Stop
To protect doors and walls, these closers have a shock-absorbing stop to damp the force of doors when they’re pushed open. Designed for frequently used doors, these last twice as long as standard door closers. They can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. These closers are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 1 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.
Free-moving closers pull doors shut after you've opened them.
Hold-open closers hold doors open until you close them with a slight push or pull on the door.
For Door Wd. | Opening Direction | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Interior | Exterior | For Door Swing Direction | Opening/Closing Action | Door Mount | Frame Mount | Range of Motion | Mounting Hardware Included | Specifications Met | Choose a Finish | Each | |
Norton UNI 1601 | |||||||||||
| 28"-32" | 27" | Reversible | Free Moving | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 00000000 | 0000000 | |
| 28"-32" | 27" | Reversible | Hold Open | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 | 00000000 | 000000 | |
| 33"-41" | 28"-36" | Reversible | Free Moving | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 00000000 | 000000 | |
| 33"-41" | 28"-36" | Reversible | Hold Open | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 | 00000000 | 000000 | |
| 42"-48" | 28"-36" | Reversible | Free Moving | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | 00000000 | 000000 | |
| 42"-48" | 28"-36" | Reversible | Hold Open | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 | 00000000 | 000000 | |
Norton UNI 7500 | |||||||||||
| 28"-48" | 28"-48" | Reversible | Free Moving | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
| 28"-48" | 28"-48" | Reversible | Hold Open | Opens Out | __ | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
Norton UNI 8301 | |||||||||||
| 28"-48" | 28"-48" | Reversible | Free Moving | Opens Out | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
| 28"-48" | 28"-48" | Reversible | Hold Open | Opens Out | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
Norton UNI 8501 | |||||||||||
| 28"-48" | 28"-48" | Reversible | Free Moving | Opens Out | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
| 28"-48" | 28"-48" | Reversible | Hold Open | Opens Out | Opens Out | 110° | Yes | ANSI A156.4 Grade 1 UL 10C UL Listed | Gray | 00000000 | 000000 |
Tight-Clearance Gas Spring Storm Door Closers
Use these closers when your door-to-door clearance is limited. They close storm doors more smoothly than standard spring closers. Both are reversible for right or left door-swing directions.
Housing | Opening Direction | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Dp. | Door-to-Door Clearance | For Door Swing Direction | Opening/Closing Action | Door Mount | Frame Mount | Range of Motion | Mounting Hardware Included | Each | |
Brown Finish | ||||||||||
| 1 1/4" | 2 1/4" | 2" | Reversible | Free Moving | Opens Out | Opens Out | 110° | Yes | 00000000 | 000000 |
Brass Plated Finish | ||||||||||
| 1 1/4" | 2 1/4" | 2" | Reversible | Free Moving | Opens Out | Opens Out | 110° | Yes | 00000000 | 00000 |