About Door Closers
When replacing an existing closer, remove the cover and match the model number and/or mounting hole pattern to a closer in our offering. Or, use one of our closers and a universal mounting plate that matches most hole patterns.
If you are installing a new closer, choose one that works for your door width. Due to added resistance from wind, closers typically accommodate smaller exterior doors than interior doors.
There are three typical mounting positions for door closers; many of our closers are versatile and can be mounted in any of these positions. To determine opening direction, stand on the side of the door where the closer will be mounted. If the door opens towards you it opens in; opens away from you it opens out.
Door Mount, Opens In—Also known as regular arm mount, this position allows the door to open in toward the closer.
Door Mount, Opens Out—Also known as parallel arm mount, the arm lays parallel with the door in the closed position.
Frame Mount, Opens Out—Also known as top frame mount, this position is often used for exterior doors.
Strut Channel Hinges
Provide smooth motion between two pieces of strut channel. The range-of-motion angle is for strut channel with flat ends. To achieve a maximum angle of 270°, cut the joint end of each strut channel at a 45° angle.
Zinc-plated steel hinges are more corrosion resistant in wet environments than powder-coated steel.
For technical drawings and 3-D models, click on a part number.
Lg. | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Number of Holes | Range of Motion | For Strut Channel Wd. | (A) | (B) | Thick. | Hole Dia. | Fasteners Included | Each | |
Zinc-Plated Steel | |||||||||
| 2 | 135° | 1 5/8" | 2 1/8" | 2 1/8" | 1/4" | 9/16" | No | 0000000 | 000000 |
| 3 | 135° | 1 5/8" | 4" | 2 1/8" | 1/4" | 9/16" | No | 0000000 | 00000 |
Green Powder-Coated Steel | |||||||||
| 2 | 135° | 1 5/8" | 2 1/8" | 2 1/8" | 1/4" | 9/16" | No | 0000000 | 00000 |
| 3 | 135° | 1 5/8" | 4" | 2 1/8" | 1/4" | 9/16" | No | 0000000 | 00000 |
Door Closers
These closers can replace Yale, Dorma, Falcon, Stanley, Parker, and Cal-Royal models with the same mounting hole pattern. They are reversible for right or left door-swing directions. All meet ANSI A156.4 Grade 2 or ANSI A156.4 Grade 3 durability, strength, and performance standards for door controls. Closers that meet UL 10C for fire-rated doors meet positive pressure fire test standards.
Free-moving closers pull doors shut after you've opened them.
Door Closers | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
For Door Wd. | Opening Direction | Replacement Springs | ||||||||||
| Interior | Exterior | For Door Swing Direction | Opening/Closing Action | Door Mount | Range of Motion | Mounting Hardware Included | Specifications Met | Finish | Each | Each | ||
Norton 78 | ||||||||||||
| 30"-48" | 30"-36" | Reversible | Free Moving | Opens In | 135° | Yes | ANSI A156.4 Grade 3 UL 10C for Fire-Rated Doors UL Listed | Bronze Plated | 0000000 | 000000000 | 00000000 | 0000000 |
| 30"-48" | 37"-44" | Reversible | Free Moving | Opens In | 135° | Yes | ANSI A156.4 Grade 3 UL 10C for Fire-Rated Doors UL Listed | Bronze Plated | 0000000 | 00000000 | 00000000 | 000000 |
Yale 1900 | ||||||||||||
| 30"-48" | 30"-36" | Reversible | Free Moving | Opens In | 135° | Yes | ANSI A156.4 Grade 3 UL 10C for Fire-Rated Doors UL Listed | Bronze Plated | 0000000 | 00000000 | 00000000 | 000000 |
| 30"-48" | 37"-44" | Reversible | Free Moving | Opens In | 135° | Yes | ANSI A156.4 Grade 3 UL 10C for Fire-Rated Doors UL Listed | Bronze Plated | 0000000 | 00000000 | 00000000 | 000000 |
| Top Frame Mounting Brackets for 30"-48" Interior Door Wd. (Aluminum) | 0000000 | Each | 0000000 |
Fire Alarm-Activated Door Closers
These closers include a door holder, which keeps doors open with an electromagnet. When activated by a fire alarm, the magnet shuts off and releases the door. Hardwire these closers directly into your fire alarm system. Designed for frequently used doors, they last longer than standard door closers. They are reversible for right or left door-swing directions. All meet ANSI/BHMA A156.15 durability, strength, and performance standards for release devices—closer holder, electromagnetic, and electromechanical. For opens-out closers, the frame cannot project more than 3 1/2" from the door's face.
| For Interior Door Wd. | Voltage | For Door Swing Direction | Opening/Closing Action | Door Mount Opening Direction | Range of Motion | Electrical Connection | Mounting Hardware Included | Specifications Met | Finish | Each | |
Rixson-Firemark 0601 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| 30"-48" | 24V AC/24V DC | Reversible | Hold Open | Opens Out | 135° | Wire Leads | Yes | ANSI/BHMA A156.15 UL Listed | Aluminum Coated | 0000000 | 0000000 |
| 30"-48" | 120V AC | Reversible | Hold Open | Opens Out | 135° | Wire Leads | Yes | ANSI/BHMA A156.15 UL Listed | Aluminum Coated | 0000000 | 000000 |