McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    175 Products
    About Hinges
    industrial info icon

    Choose the right hinge based on mounting style, clearance, leaf thickness, knuckle length, and other important dimensions.

    Surface-Mount Hinges without Holes

    Image of Product. Front orientation. Hinges. Surface-Mount Hinges without Holes.
    Install these hinges your way by drilling holes or welding onto doors and frames. They offer more mounting flexibility than hinges with holes.
    Removable Pin—For doors you need to remove occasionally to make adjustments or access equipment.
    Nonremovable Pin—The tamper-resistant choice. Since the pin can’t be removed, the door can only be taken down by removing the hinge completely.
    Zinc-Plated Steel—A common choice for areas exposed to occasional moisture.
    Galvanized Steel—An economical alternative to stainless steel, these hinges have a galvanized finish that resists rust in wet and outdoor environments.
    Low-Carbon Steel—Strong and the easiest to weld but will rust in damp environments.
    304 Stainless Steel—The choice for wet and outdoor environments, these hinges resist rust. However, they won't hold up to the harsh chemicals that 316 stainless steel hinges can.
    316 Stainless Steel—Our most corrosion-resistant stainless steel hinges won't degrade when exposed to harsh weather, salt water, and most chemicals.
    Aluminum—One-third the weight of steel, these hinges are often used on enclosures, carts, and other equipment where you want to limit the load.
    Removable Pin
    Nonremovable Pin
    Door
    Leaf
    Frame
    Leaf
    Each
    Each
    Ht.
    Wd.
    Ht.
    Wd.
    Overall
    Wd.
    Leaf
    Thk.
    Range of
    Motion
    Pin Material
    Appearance
    1-9
    10-Up
    1-9
    10-Up
    Zinc-Plated Steel
    2"1"2"1"2"0.090"265°SteelDull———001623A1000000000000
    3"1 1/2"3"1 1/2"3"0.120"265°SteelDull———001623A20000000000
    4"2"4"2"4"0.180"265°BrassDull———001623A150000000000
    4"2"4"2"4"0.250"265°BrassDull———001623A30000000000
    4 1/2"2 1/4"4 1/2"2 1/4"4 1/2"0.180"265°BrassDull———001623A160000000000
    5"2 1/2"5"2 1/2"5"0.180"265°BrassDull———001623A170000000000
    5"2 1/2"5"2 1/2"5"0.250"265°BrassDull———001623A40000000000
    6"3"6"3"6"0.180"265°BrassDull———001623A180000000000
     
    Galvanized Steel
    2"1"2"1"2"0.105"265°BrassDull———001623A11000000000
    2 1/2"1 3/16"2 1/2"1 3/16"2 3/8"0.120"265°BrassDull———001623A120000000000
    3"1 1/2"3"1 1/2"3"0.135"265°BrassDull———001623A130000000000
    3 1/2"1 3/4"3 1/2"1 3/4"3 1/2"0.165"265°BrassDull———001623A140000000000
     
    Low-Carbon Steel
    1"1/2"1"1/2"1"0.047"265°SteelDull16175A561000000000016175A1200000000
    1 1/2"11/16"1 1/2"11/16"1 3/8"0.047"265°SteelDull16175A5620000000016175A13100000000
    1 1/2"3/4"1 1/2"3/4"1 1/2"0.050"265°SteelDull———0016175A1100000000
    2"3/4"2"3/4"1 1/2"0.060"265°SteelDull———0016175A18100000000
    2"25/32"2"25/32"1 9/16"0.063"265°SteelDull16175A5630000000016175A18200000000
    2"1"2"1"2"0.060"265°SteelDull———0016175A1400000000
    2"1"2"1"2"0.083"265°SteelDull16175A570000000016175A1500000000
    2"1"2"1"2"0.107"265°SteelDull16175A580000000016175A1600000000
    2 1/2"27/32"2 1/2"27/32"1 11/16"0.063"265°SteelDull16175A5640000000016175A2500000000
    2 1/2"1"2 1/2"1"2"0.075"265°SteelDull———0016175A1700000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.089"265°SteelDull16175A620000000016175A2100000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.120"265°SteelDull16175A630000000016175A2200000000
    3"31/32"3"31/32"1 15/16"0.072"265°SteelDull———0016175A2700000000
    3"1"3"1"2"0.075"265°SteelDull16175A6100000000———00
    3"1"3"1"2"0.090"265°SteelDull———0016175A1900000000
    3"1 1/4"3"1 1/4"2 1/2"0.120"265°SteelDull16175A640000000016175A2300000000
    3"1 1/2"3"1 1/2"3"0.093"265°SteelDull16175A650000000016175A2400000000
    3"1 1/2"3"1 1/2"3"0.120"265°SteelDull16175A660000000016175A2600000000
    3 1/2"1 21/32"3 1/2"1 21/32"3 5/16"0.123"265°SteelDull16175A730000000016175A3200000000
    3 1/2"1 3/4"3 1/2"1 3/4"3 1/2"0.150"265°SteelDull16175A7400000000———00
    4"1 1/2"4"1 1/2"3"0.120"265°SteelDull16175A680000000016175A2800000000
    4"1 3/4"4"1 3/4"3 1/2"0.165"265°SteelDull16175A75000000000016175A33000000000
    4"1 31/32"4"1 31/32"3 15/16"0.130"265°SteelDull16175A76000000000———00
    4"2"4"2"4"0.120"265°SteelDull16175A770000000016175A3500000000
    4"2"4"2"4"0.150"265°SteelDull———0016175A360000000000
    4"2"4"2"4"0.180"265°SteelDull16175A7800000000016175A37000000000
    4"2"4"2"4"0.250"265°SteelDull16175A79000000000016175A380000000000
    4 1/2"2 1/4"4 1/2"2 1/4"4 1/2"0.120"265°SteelDull16175A8300000000016175A42000000000
    4 1/2"2 1/4"4 1/2"2 1/4"4 1/2"0.185"265°SteelDull16175A84000000000016175A430000000000
    5"2"5"2"4"0.180"265°SteelDull16175A82000000000016175A410000000000
    5"2 1/2"5"2 1/2"5"0.120"265°SteelDull———0016175A44000000000
    5"2 1/2"5"2 1/2"5"0.150"265°SteelDull16175A85000000000016175A450000000000
    5"2 1/2"5"2 1/2"5"0.180"265°SteelDull16175A86000000000016175A460000000000
    5"2 1/2"5"2 1/2"5"0.250"265°SteelDull16175A87000000000016175A470000000000
    6"1 1/2"6"1 1/2"3"0.180"265°SteelDull16175A72000000000016175A290000000000
    6"2 1/2"6"2 1/2"5"0.180"265°SteelDull16175A88000000000016175A480000000000
    6"2 1/2"6"2 1/2"5"0.250"265°SteelDull———0016175A490000000000
    6"3"6"3"6"0.120"265°SteelDull———0016175A39000000000
    6"3"6"3"6"0.165"265°SteelDull———0016175A510000000000
    6"3"6"3"6"0.180"265°SteelDull16175A91000000000016175A520000000000
    6"3"6"3"6"0.250"265°SteelDull16175A92000000000016175A530000000000
    8"3"8"3"6"0.180"265°SteelDull———0016175A550000000000
     
    304 Stainless Steel
    1 1/2"3/4"1 1/2"3/4"1 1/2"0.050"265°304 Stainless Steel
    Dull———001624A6100000000
    2"3/4"2"3/4"1 1/2"0.060"265°304 Stainless Steel
    Dull1624A12000000001624A6200000000
    2"1"2"1"2"0.060"265°304 Stainless Steel
    Dull1624A51000000001624A6400000000
    2"1"2"1"2"0.075"265°304 Stainless Steel
    Dull1624A13000000001624A6500000000
    2"1"2"1"2"0.090"265°304 Stainless Steel
    Dull1624A14000000001624A6600000000
    2 1/2"1"2 1/2"1"2"0.060"265°304 Stainless Steel
    Dull———001624A7200000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.060"265°304 Stainless Steel
    Dull———001624A6900000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.075"265°304 Stainless Steel
    Dull1624A53000000001624A7100000000
    3"1"3"1"2"0.090"265°304 Stainless Steel
    Dull1624A15000000001624A6700000000
    3"1"3"1"2"0.120"265°304 Stainless Steel
    Dull1624A520000000001624A68000000000
    3"1 1/2"3"1 1/2"3"0.060"265°304 Stainless Steel
    Dull———001624A7800000000
    3"1 1/2"3"1 1/2"3"0.075"265°304 Stainless Steel
    Dull———001624A93000000000
    3"1 1/2"3"1 1/2"3"0.090"265°304 Stainless Steel
    Dull1624A5400000000001624A7300000000
    3"1 1/2"3"1 1/2"3"0.120"265°304 Stainless Steel
    Dull1624A5500000000001624A74000000000
    3 1/2"1 1/2"3 1/2"1 1/2"3"0.060"265°304 Stainless Steel
    Dull———001624A8800000000
    3 1/2"1 1/2"3 1/2"1 1/2"3"0.090"265°304 Stainless Steel
    Dull———001624A75000000000
    3 1/2"1 3/4"3 1/2"1 3/4"3 1/2"0.090"265°304 Stainless Steel
    Dull1624A160000000001624A77000000000
    4"1 1/2"4"1 1/2"3"0.120"265°304 Stainless Steel
    Dull1624A5600000000001624A760000000000
    4"1 3/4"4"1 3/4"3 1/2"0.075"265°304 Stainless Steel
    Dull———001624A940000000000
    4"1 3/4"4"1 3/4"3 1/2"0.090"265°304 Stainless Steel
    Dull———001624A950000000000
    4"2"4"2"4"0.060"265°304 Stainless Steel
    Dull———001624A79000000000
    4"2"4"2"4"0.120"265°304 Stainless Steel
    Dull1624A5700000000001624A810000000000
    4"2"4"2"4"0.180"265°304 Stainless Steel
    Dull1624A1700000000001624A820000000000
    4"2"4"2"4"0.250"265°304 Stainless Steel
    Dull———001624A830000000000
    5"2 1/4"5"2 1/4"4 1/2"0.090"265°304 Stainless Steel
    Dull———001624A960000000000
    5"2 1/2"5"2 1/2"5"0.120"265°304 Stainless Steel
    Dull1624A5800000000001624A850000000000
    5"2 1/2"5"2 1/2"5"0.180"265°304 Stainless Steel
    Dull1624A1800000000001624A860000000000
    5"2 1/2"5"2 1/2"5"0.250"265°304 Stainless Steel
    Dull———001624A870000000000
    6"3"6"3"6"0.120"265°304 Stainless Steel
    Dull1624A5900000000001624A890000000000
    6"3"6"3"6"0.180"265°304 Stainless Steel
    Dull1624A1900000000001624A910000000000
    6"3"6"3"6"0.250"265°304 Stainless Steel
    Dull———001624A920000000000
     
    316 Stainless Steel
    1 1/2"3/4"1 1/2"3/4"1 1/2"0.060"265°316 Stainless Steel
    Dull———0015095A3200000000
    2"3/4"2"3/4"1 1/2"0.060"265°316 Stainless Steel
    Dull———0015095A3300000000
    2"1"2"1"2"0.060"265°316 Stainless Steel
    Dull———0015095A3400000000
    2"1"2"1"2"0.075"265°316 Stainless Steel
    Dull———0015095A41000000000
    2"1"2"1"2"0.090"265°316 Stainless Steel
    Dull———0015095A39000000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.060"265°316 Stainless Steel
    Dull———0015095A3500000000
    3"1"3"1"2"0.090"265°316 Stainless Steel
    Dull———0015095A54000000000
    3"1"3"1"2"0.120"265°316 Stainless Steel
    Dull———0015095A550000000000
    3"1 1/2"3"1 1/2"3"0.060"265°316 Stainless Steel
    Dull———0015095A3600000000
    3"1 1/2"3"1 1/2"3"0.075"265°316 Stainless Steel
    Dull———0015095A370000000000
    3"1 1/2"3"1 1/2"3"0.090"265°316 Stainless Steel
    Dull———0015095A42000000000
    3"1 1/2"3"1 1/2"3"0.120"265°316 Stainless Steel
    Dull15095A22000000000015095A430000000000
    4"1 1/2"4"1 1/2"3"0.120"265°316 Stainless Steel
    Dull———0015095A560000000000
    4"1 3/4"4"1 3/4"3 1/2"0.075"265°316 Stainless Steel
    Dull———0015095A380000000000
    4"2"4"2"4"0.120"265°316 Stainless Steel
    Dull15095A23000000000015095A440000000000
    4"2"4"2"4"0.180"265°316 Stainless Steel
    Dull———0015095A570000000000
    5"2 1/4"5"2 1/4"4 1/2"0.090"265°316 Stainless Steel
    Dull———0015095A450000000000
    5"2 1/2"5"2 1/2"5"0.120"265°316 Stainless Steel
    Dull———0015095A460000000000
     
    Aluminum
    1 1/2"3/4"1 1/2"3/4"1 1/2"0.064"265°5052 Aluminum
    Dull———001609A1200000000
    2"1"2"1"2"0.060"265°5052 Aluminum
    Dull———001609A500000000
    2"1"2"1"2"0.064"265°5052 Aluminum
    Dull1609A4100000000———00
    2"1"2"1"2"0.075"265°5052 Aluminum
    Dull———001609A1400000000
    2"1"2"1"2"0.090"265°5052 Aluminum
    Dull———001609A5300000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.080"265°5052 Aluminum
    Dull———001609A1600000000
    2 1/2"1 1/4"2 1/2"1 1/4"2 1/2"0.120"265°5052 Aluminum
    Dull1609A42000000001609A2100000000
    3"1"3"1"2"0.120"265°5052 Aluminum
    Dull———001609A2500000000
    3"1 1/2"3"1 1/2"3"0.060"265°5052 Aluminum
    Dull———001609A5100000000
    3"1 1/2"3"1 1/2"3"0.075"265°5052 Aluminum
    Dull———001609A2400000000
    3"1 1/2"3"1 1/2"3"0.090"265°5052 Aluminum
    Dull———001609A17000000000
    3"1 1/2"3"1 1/2"3"0.120"265°5052 Aluminum
    Dull1609A430000000001609A22000000000
    3 1/2"1 3/4"3 1/2"1 3/4"3 1/2"0.090"265°5052 Aluminum
    Dull———001609A27000000000
    4"1 1/2"4"1 1/2"3"0.120"265°5052 Aluminum
    Dull———001609A260000000000
    4"1 3/4"4"1 3/4"3 1/2"0.075"265°5052 Aluminum
    Dull———001609A52000000000
    4"2"4"2"4"0.120"265°5052 Aluminum
    Dull1609A4400000000001609A230000000000
    4"2"4"2"4"0.250"265°5052 Aluminum
    Dull1609A10000000000———00
    5"2 1/4"5"2 1/4"4 1/2"0.090"265°5052 Aluminum
    Dull———001609A540000000000
    5"2 1/2"5"2 1/2"5"0.120"265°5052 Aluminum
    Dull———001609A550000000000
    5"2 1/2"5"2 1/2"5"0.250"265°5052 Aluminum
    Dull1609A20000000000———00
     

    Precision-Control Friction Hinges

    Image of Product. Front orientation. Hinges. Precision-Control Friction Hinges, Style 2.

    Style 2

    Change the resistance of these hinges by turning the screw. They hold lids, panels, and doors open without props, locks, or springs.
    430 Stainless Steel—Made of an economical stainless steel alloy, these hinges resist corrosion from mild chemicals and water. However, they won't hold up to long-term outdoor exposure like 304 stainless steel can.
    Torque—When selecting a hinge to use with a lid, first find the torque force needed to move the lid. Multiply the weight of the lid (in pounds) by the distance between the hinge and the center of the lid (in inches). For example: if the lid weighs 3 lbs. and the distance between the hinge and the center of the lid is 12", the torque force is 3 lbs. × 12"= 36 in.-lbs. Divide the torque force by the number of hinges. For example, if using two hinges 36 in.-lbs. ÷ 2 = 18 in.-lbs. each.
    Door
    Leaf
    Frame
    Leaf
    Mounting
    Holes
    Torque,
    in·lbf
    Ht.
    Wd.
    Range of
    Motion
    Ht.
    Wd.
    Overall
    Wd.
    Material
    Door Mounting
    Location
    No.
    of
    Screw
    Size
    Fasteners
    Included
    Each
    Style 2
    701 11/16"1 1/8"265°1 7/16"1 1/8"3 5/32"430 Stainless SteelLeft Side, Right Side8M4.5
    No1791A101000000
     

    Plastic Hinges without Holes

    Image of Product. Front orientation. Hinges. Plastic Hinges without Holes.
    Drill your own holes in plastic hinges that resist moisture and chemicals. Lightweight and squeak-free, they’re often used on enclosures, cabinets, and other equipment.
    Removable Pin—For doors you need to remove occasionally to make adjustments or access equipment.
    Acrylic Plastic—A good choice for lightweight, see-through panels and covers. These hinges are strong and scratch resistant, but they can crack from impact.
    Door
    Leaf
    Frame
    Leaf
    Each
    Ht.
    Wd.
    Ht.
    Wd.
    Overall
    Wd.
    Leaf
    Thk.
    Range of
    Motion
    Pin
    Material
    1-9
    10-Up
    Removable Pin
     
    Clear Acrylic Plastic
    1 1/2"11/16"1 1/2"11/16"1 3/8"0.125"265°Nylon
    11185A1410000000000
    1 3/4"3/4"1 3/4"3/4"1 1/2"0.187"265°Nylon
    11185A1100000000
     
    back to top