About Nuts, Materials, and Finishes
More
Rod End Nuts
Attach these nuts to rods, pipes, and tubes to make pivoting and hinge movements where misalignment is not a concern. They’re often used to control air- and hydraulic-powered arms as well as other components in power transmission systems. Made of zinc-plated steel, these nuts resist being dislodged. They’re heavy, however, and may corrode over time as the plating wears down.
For technical drawings and 3-D models, click on a part number.
Nuts with Round Shank
Round Shank
Round Shank
| Shank Thread Size | ID, mm | Overall Diameter, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength  | Material | Each | |
Right-Hand Threaded Shank | ||||||||
|---|---|---|---|---|---|---|---|---|
| M3.5 × 0.6 mm | 4.1 | 8 | 11 | 6 | Not Rated | Zinc-Plated Steel | 0000000 | 00000 |
| M5 × 0.8 mm | 6.1 | 10 | 16 | 8 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| M8 × 1.25 mm | 8.1 | 14 | 19 | 11 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
| M10 × 1.5 mm | 8.1 | 18 | 27 | 12 | Not Rated | Zinc-Plated Steel | 0000000 | 0000 |
Nuts with Tapered Shank
Tapered Shank
Tapered Shank
| Shank Thread Size | ID, mm | Overall Width, mm | Overall Thickness, mm | Shank Center Length, mm | Shank Thread Length, mm | Tensile Strength | Material | Each | |
Right-Hand Threaded Shank | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| M5 × 0.8 mm | 8.1 | 15 | 10 | 16 | 8 | Not Rated | Zinc-Plated Steel | 0000000 | 00000 |