System of Measurement System of Measurement  Show 


Movement Movement 

180° Pivot  360° Swivel 
Thread Length Thread Length 




Material Material 


Finish Finish 


Vertical Capacity Vertical Capacity 


Overall Height Overall Height 

Specifications Met Specifications Met 

DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) 

About Lifting with Hoist Rings
More
Hoist Rings—For Lifting
Steel and 316
Stainless Steel
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Blackoxide steel offers mild corrosion resistance.
Nickelcoated steel is more corrosion resistant than blackoxide steel.
316 stainless steel provides the most corrosion resistance.
Hoist rings that are CE marked meet European requirements for health, safety, and environmental protection.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3D models, click on a part number.
Thread Size  Thread Pitch, mm  Thread Lg.  Inside Wd.  Overall Ht.  Vertical Capacity, lbs.  Movement  Specifications Met  Each  
Forged BlackOxide Steel  

M8  1.25  16mm  33mm  98mm  875  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M8  1.25  21mm  33mm  103mm  875  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M10  1.5  16mm  33mm  98mm  975  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M10  1.5  26mm  33mm  108mm  975  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M12  1.75  25mm  50mm  160mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M12  1.75  25mm  50mm  200mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M12  1.75  32mm  50mm  167mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M12  1.75  32mm  50mm  207mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M14  2  25mm  50mm  161mm  3,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M14  2  25mm  50mm  200mm  3,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M14  2  32mm  50mm  168mm  3,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M14  2  32mm  50mm  207mm  3,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M16  2  25mm  50mm  160mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M16  2  25mm  50mm  200mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M16  2  32mm  50mm  167mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M16  2  32mm  50mm  207mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M20  2.5  25mm  50mm  160mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M20  2.5  25mm  50mm  200mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M20  2.5  28mm  71mm  216mm  6,600  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M20  2.5  28mm  71mm  257mm  6,600  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M20  2.5  38mm  50mm  173mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M20  2.5  38mm  50mm  213mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  00000 
M24  3  28mm  71mm  216mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M24  3  28mm  71mm  257mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M24  3  38mm  71mm  226mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M24  3  38mm  71mm  267mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M30  3.5  38mm  71mm  226mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  38mm  71mm  267mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  48mm  71mm  236mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M30  3.5  48mm  71mm  277mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  67mm  101mm  302mm  15,425  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M36  4  67mm  101mm  302mm  24,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
Machined BlackOxide Steel  
M8  1.25  17mm  21mm  85mm  875  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M10  1.5  18mm  21mm  86mm  975  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M12  1.75  19mm  44mm  142mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M12  1.75  19mm  44mm  190mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M16  2  24mm  44mm  146mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M16  2  24mm  44mm  195mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M20  2.5  29mm  71mm  195mm  6,600  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M20  2.5  29mm  71mm  236mm  6,600  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M20  2.5  30mm  44mm  152mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M20  2.5  30mm  44mm  201mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  00000 
M24  3  34mm  71mm  200mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M24  3  34mm  71mm  241mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  46mm  89mm  268mm  15,425  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  54mm  71mm  220mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  54mm  71mm  261mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M30  3.5  66mm  89mm  288mm  15,425  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M42  4.5  79mm  114mm  396mm  27,550  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
M48  5  79mm  114mm  396mm  29,750  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  00000000  000000 
NickelCoated Steel  
M8  1.25  13mm  21mm  81mm  875  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M8  1.25  16mm  33mm  98mm  875  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M10  1.5  16mm  33mm  98mm  975  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M10  1.5  18mm  21mm  86mm  975  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M12  1.75  19mm  44mm  142mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M12  1.75  25mm  50mm  160mm  2,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M14  2  25mm  50mm  161mm  3,300  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M16  2  25mm  50mm  160mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M16  2  29mm  44mm  152mm  4,175  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M20  2.5  25mm  50mm  160mm  4,850  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M20  2.5  34mm  44mm  157mm  4,725  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M24  3  28mm  71mm  216mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M24  3  37mm  71mm  200mm  9,250  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
M30  3.5  38mm  71mm  226mm  9,900  180° Pivot and 360° Swivel  ASME B30.26, CE Marked, MILSTD1365, MILSTD209  0000000  000000 
316 Stainless Steel  
M8  1.25  13mm  22mm  81mm  425  180° Pivot and 360° Swivel  ASME B30.26  0000000  000000 
M10  1.5  18mm  22mm  86mm  550  180° Pivot and 360° Swivel  ASME B30.26  0000000  000000 
M12  1.75  19mm  44mm  140mm  1,150  180° Pivot and 360° Swivel  ASME B30.26  0000000  000000 
M16  2  29mm  44mm  150mm  2,075  180° Pivot and 360° Swivel  ASME B30.26  0000000  000000 
M20  2.5  34mm  44mm  155mm  2,350  180° Pivot and 360° Swivel  ASME B30.26  0000000  000000 
M24  3  37mm  72mm  203mm  4,600  180° Pivot and 360° Swivel  ASME B30.26  0000000  000000 
SideMount Hoist Rings—For Lifting
Choose these hoist rings when you need to lift your load from the side. Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3D models, click on a part number.
Thread Size  Thread Pitch, mm  Thread Lg., mm  Inside Wd., mm  Overall Ht., mm  Vertical Capacity, lbs.  Movement  Each  
Steel  

M8  1.25  16  45  101  700  180° Pivot and 360° Swivel  00000000  000000 
M10  1.5  20  45  101  1,100  180° Pivot and 360° Swivel  00000000  00000 
M12  1.75  24  51  165  1,575  180° Pivot and 360° Swivel  00000000  00000 
M16  2  32  51  165  3,075  180° Pivot and 360° Swivel  00000000  00000 
M20  2.5  40  51  165  5,025  180° Pivot and 360° Swivel  00000000  000000 