System of Measurement System of Measurement |
---|
|
Thread Size Thread Size | Show |
---|
Thread Size Thread Size | Hide |
---|
Thread Pitch Thread Pitch |
---|
|
Thread Length Thread Length |
---|
|
Vertical Capacity Vertical Capacity |
---|
|
Fabrication Fabrication |
---|
|
Finish Finish |
---|
|
Material Material |
---|
|
Inside Width Inside Width |
---|
|
Overall Height Overall Height |
---|
|
Movement Movement |
---|
![]() | ![]() |
180° Pivot | 360° Swivel |
More
Designed for angular lifting, hoist rings resist stresses that would bend or break an eyebolt. They have a lifting ring that pivots 180° front to back and a base that swivels 360° to compensate for pitch, roll, and sway when lifting heavy or unbalanced loads. Install the base of the hoist ring flush to the mounting surface and tighten to the recommended torque that is stamped on the ring. Torque Wrenches are sold separately.
Machined hoist rings have a smooth finish to protect slings and hooks from damage and excess wear during lifting.
Black-oxide steel offers mild corrosion resistance.
Hoist rings that are CE marked meet European requirements for health, safety, and environmental protection.
Note: Capacities listed are for vertical lifting only. As the lift angle changes from vertical, the amount of weight the hoist ring can lift is significantly reduced. For example, when lifting a 1,000 lb. load at a 45° angle, you must choose a hoist ring with a capacity of at least 1,400 lbs. Do not use at an angle less than 30°.
Warning: Never use to lift people or items over people.
For technical drawings and 3-D models, click on a part number.
Thread Size | Thread Pitch, mm | Thread Lg., mm | Inside Wd., mm | Overall Ht., mm | Vertical Capacity, lbs. | Movement | Specifications Met | Each | |
Machined Black-Oxide Steel | |||||||||
---|---|---|---|---|---|---|---|---|---|
M42 | 4.5 | 79 | 114 | 396 | 27,550 | 180° Pivot and 360° Swivel | ASME B30.26, CE Marked, MIL-STD-1365, MIL-STD-209 | 00000000 | 0000000 |