Mount these clamps to a bench top or other surface to keep workpieces in place.

Push the lever to lock the handle and prevent accidental opening.

Reduce the chance of getting pinched when unclamping. These clamps have more space between the handle and the arm than other low-profile toggle clamps.

Push the lever to lock the handle and prevent accidental opening.

Often used when assembling small parts, these small clamps have the holding strength of a full-size clamp.

Bolt to the side of an object. Often used to clamp lids and covers on containers.

Two sets of mounting holes allow mounting on the bottom or side.

The mounting base secures these clamps to a rail or bar.

Replace worn screws or customize your clamps.

Suitable for production applications, these clamps have double the service life of other air-powered toggle clamps.

The base fits into round or square holes on most workholding tables for clamping anywhere on the work surface.

Eliminating the need for step blocks or other rear support, the pivoting rocker clamps workpieces of various thicknesses.

The stepped end provides support and quick height adjustment when paired with a step block.

Good for occasional machining, economy kits contain lower-strength components than standard kits.

The offset shape provides more clearance above the nut than standard clamps. Also known as gooseneck clamps.

Position these clamps between two workpieces, vises, or fixtures and secure both to your machine table using T-slot nuts or bolts.

A plastic pad on the gripping surface of these clamps prevents workpiece marring, making them useful for holding polished surfaces and reducing the need for secondary finishing steps.

Making minimal contact with the workpiece while holding securely, these clamps are good for small parts and can clamp into holes and notches.

Also known as toe clamps, these grip the side of a workpiece to leave the top free for machining.

An alternative to setup clamps, these heavy duty clamps have high holding power to secure workpieces during machining.

Tighten the spring-loaded socket head cap screw on these clamps to hold your workpiece from above.

Mount using the holes in the base.

Machine these clamps to match the contours of your workpiece and turn the screw to grip.

Install these clamps into a slot in your fixture to grip at the bottom of a workpiece edge, giving the cutting tool maximum access.

Machine these fixture clamps to match the contours of your workpieces for a stronger grip. Place the clamp between the two workpieces in a fixture and tighten the screw to extend the sides of the clamp, creating a secure hold against both workpieces.

Secure a workpiece from the inside, leaving the outside clear for machining.

Fit the draw arm over a latch plate and pull the handle to clamp.

Push the lever to lock the handle and prevent accidental opening.

Hold workpieces of different thicknesses without adjustment.

The spring-loaded tips on these clamps swivel in all directions to make maximum contact with angled and uneven workpieces.

Also known as press screws, mount these clamps through a drilled hole and turn the crank to move the jaw end of the screw in and out.

Mount to the top of your workbench.

The ring pivots 90° or 180° to secure loads in various directions.

Dimples hold the base tight to prevent it from swiveling.

The ring pivots 180° to secure loads in various directions. Also known as lashing rings.

Accommodate ties in any direction with these rings that swivel all the way around and pivot 180°.

Use these rings to make a temporary anchor point on ferrous metal surfaces.

Also known as footman's loops, use these guides to prevent webbing from twisting, or as anchor points in tie-down applications.

No need for drilling or welding—these guides mount with adhesive.

Use these guides to position a rope.

Two rotating cams pinch and hold rope as you pull it through to provide a temporary hold.

When full lengths of track won't fit, use these plates to mount a single fitting.

Slide these hooks into track to hang equipment or attach straps.

Mount threaded accessories onto track.

These straps have a ratchet buckle that tightens incrementally for maximum tension.

Use these plates where full lengths of track won't fit to create one anchor point.

Quickly increase and release tension over loads: lift the cam on the buckle, pull the webbing through, and release the cam to hold webbing in place.

The ring pivots to secure loads in various directions.

These aluminum beams provide lightweight decking and bracing.

Contain and organize bulky and oddly shaped loads with these nets.

These guides have a flat slot that accepts webbing and prevents it from twisting.

The slotted bar on these buckles allows you to attach an eye easily.

Attach webbing to these buckles without sewing.

Permanently sew webbing onto these buckles.

Press the button to retract the webbing for easy storage.

Use this webbing in tie down and towing applications. It absorbs shock and will not scratch or damage the contact surface.

The track fitting attaches to snap-in load-securing track, also known as E-track.

Sunlight and salt water are no match for this webbing that also resists chemicals and abrasion.

A tight weave gives this webbing better abrasion and slip resistance than standard nylon webbing.

Often used in temperatures up to 500° F without burning or melting. This webbing is also soft to the touch.

Cotton is nonabrasive and soft enough to allow buckles to grip tightly.

A nylon core makes this webbing stronger than standard cotton webbing.

Use the split in the hook to slide a loop on and off these fittings.

Permanently sew webbing onto these hooks.

Add a slide to webbing to make adjustable straps.

Protect items from theft and tampering; these tie downs have a combination lock on each end.

A polyurethane strap on one end of these tie downs stretches and contracts to maintain even tension when loads shift.

A polyurethane strap on one end stretches and contracts to maintain even tension when loads shift.

Each end of these straps has a hook and a movable ring—use them separately or together to create a soft loop in a choker configuration.

Fold these nets in half to cradle items.

Hold heavy loads in place with these strong nets that have more attachment points and thicker webbing than light duty cargo nets.

Push the mounting plate into the collar to grip the cord.

Create a tie down by attaching these hooks to elastic strap.

The thick wire coil on these hooks makes them stronger than standard hooks.

Strap is wider than cord to distribute pressure across the load.

These straps have holes on each end to accept a hook.

Strap is wider than cord to distribute pressure across the load.

Color-coded by the year and quarter of manufacture, this cotton-covered elastic cord meets MIL-C-5651.