Make castings and fill voids with these two-part pourable epoxies.

Knead the epoxy-coated patch and resin together to make repairs to pipes, tanks, drums, and containers in the field.

An easy way to make repairs in the field. Cut patches to size, peel off the backing, and press into place. Expose them to sunlight or a UV lamp and they begin to harden immediately.

Mix these two-part epoxy surface fillers to create a strong repair in wet environments or underwater.

Able to withstand temperatures up to 2300° F, these ceramic surface fillers are often used as thermal insulation on brick, mortar, burner blocks, furnace holders, and thermocouples.

Also known as sloshing compounds, these surface fillers bond to rough, rusty surfaces in fuel tanks to repair leaks and prevent further corrosion.

Fill cracks up to 4" deep on horizontal surfaces, such as floors and sidewalks.

Pour these ready-to-use fillers in cracks up to ½" wide and ¼" deep on horizontal surfaces to make fast, light duty repairs.

Stop active leaks of up to 50 gallons per minute in concrete, brick, and stone. These crack fillers begin to harden within seconds to create a permanent fix that won't shrink.

Cover large sections of damaged concrete with these durable patching compounds. Made up of a resin, hardener, and aggregate, they cover more area than any of our other concrete patching compounds.

For use when thickness will be less than 2", sand mixes consist of cement and sand.

Not only do these leveling compounds withstand severe abrasion, wear, and impact, they also stand up to steel wheels and heavy blows without cracking.

These leveling compounds stand up to acid and chemical spills, making them a good choice for corrosive environments. They also withstand steel wheels and heavy impacts.

For use in processing equipment that carries large particles 1/16" in diameter and larger, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as pump housings, chute linings, and hoppers.

Chemicals will not affect these two-part epoxies. They repair cracked, worn, and damaged surfaces.

For use in processing equipment that carries small particles less than 1/16" in diameter, these ceramic-filled epoxies rebuild and repair surfaces exposed to abrasion from particles, such as dust collectors, fan blades, and fan housings.

Stop leaks in metal tanks and equipment without draining the contents. Until a permanent repair can be made, rub these sticks into the leak to form a temporary seal.

Stop leaks in metal tanks and equipment without draining the contents.

Repair stripped threads on female connections, such as oil pans, valve covers, and distributor caps.

A high silver content allows these surface fillers to conduct electricity and heat. Use them to fill gaps and rebuild missing material on electrical connections or to assemble new components.

These surface fillers come in a pen for precision application. After applying, use the LED on the back of the pen to instantly cure.

Spray these surface fillers on molded plastic parts that have surface blemishes, scratches, and mold lines. Use with ABS, polystyrene, and glass-filled nylon.

Fill and conceal small cracks, nail holes, and blemishes. Compounds are ready to use.

Assortments include two 4" × 4" patches and a 6" × 6" patch.

Spray these compounds onto ceilings to create a popcorn texture that covers stains, patches, and chips. The nozzle is upright for easy application.

Also known as drywall mud, these joint compounds are ready to use. Apply with drywall tape over seams for a finished appearance.

Tape hides seams and smooths out corners. It has an adhesive back for bonding and requires joint compound for finishing. It can also be used to repair damaged walls.

Remove hardened flecks of mortar, dirt, and other debris.

Smooth and spread grout between tiles.

A thin, flexible blade makes easy work of smoothing and feathering drywall compound.

Also known as mud pans, use these to mix small amounts of drywall compound or to bring it to your work area.

Cut perfect circles up to 16" in diameter to create openings for pipes, conduit, or lighting fixtures.

Thicker than taping knives, trowels can apply and spread large amounts of drywall compound quickly.

These long, thin brushes have semi-soft bristles to smooth out wrinkles and air bubbles after wall coverings are applied without damaging the wall covering itself.

With a durable one-piece construction, these boxes have no seams or welds to crack and leak.

Use floats after edging and grooving to smooth the surface and allow trapped air and water to escape.

Drag these brooms along hardening concrete to create a rough surface for traction in slippery environments.

Improve the strength of your concrete mix by eliminating trapped air.

Make removing form-board stakes easier.

Cut rope to the length you need, pack it in cracks up to 1" wide, and heat with a propane torch.

Fix damaged wood or build up and replace missing wood.

Make flexible, waterproof repairs to rips and tears in canvas, leather, and acrylic fabric.

Mix this two-part epoxy—a resin-aggregate blend and a pigmented hardener—to create a grout that resists chemicals and doesn't require sealing. Use on ceramic, concrete, and stone floor and wall tiles.

Fill cracks with these coatings to stop leaks and deaden sound.

Repair holes and seal gaps in roofing and gutters. These patching compounds are durable and water resistant.

Make a temporary repair to cracks in any flat roof. These patching compounds are a powder that forms a thick gel in minutes when poured directly into standing water and rain.