For accurate punching of inner and outer holes, these sets come with pilots that attach to the outer hole punch.

Create holes for installing heavy duty industrial connectors. When the die and punch are pressed together, four centering mandrels in the die mark where to drill holes for the connector's assembly.

Use a wrench to cut DIN-size holes in steel up to 1/16" thick.

Create larger holes and make repeated punches with these drivers that supply 11 tons of force to the included hole punches.

Rotate the angled head of the driver up to 180° to fit it into tight spaces and supply eight tons of force to the hole punches.

Punch conduit up to size 1 1/4.

About half the size of a standard portable lever-operated punch, these punches can fit in your toolbox.

Deliver nearly three times the punching force of a standard portable lever-operated punch by holding one handle and turning the other 360°.

Use twice the punching force of standard extended-reach punches to make holes in structural steel channels and angle iron.

Our most powerful lever-operated punch, the rotary-action socket turns to deliver two to three times the punching force of other bench-mount lever-operated punches.

The carbide teeth on these saws last up to twice as long as high-speed steel teeth.

Quickly connect these saws to your drill or drill press with the built-in arbor.

These saws have high-speed steel teeth.

Make clean, fast cuts in thin metal and plastic when you use one of these saws with an impact driver. The body widens at the top to prevent the saw from pushing through your workpiece.

The carbide teeth on these steel saws cut aluminum, brass, bronze, steel, and plastic sheets and last up to twice as long as high-speed steel teeth.

Use these saws with a drill press to cut a variety of hole sizes in sheet metal.

The saws in these kits have carbide-tipped teeth, so they last up to twice as long as saws with high-speed steel teeth.

Unlike standard tube cutters, which cut from the outside, these cutters slide into tube ends to cut and vent from inside.