Hole Seals | McMaster-Carr

	REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration, Evaluation, Authorization and Restriction of Chemicals)

REACH Compliant

Forward

How can we improve?

5,340 Products

Hole Plugs for Enclosures

Washdown Hole Plugs

Sized for knockouts and conduit openings.

Washdown Hole Plugs for Push-Button Holes

Sized for 22 mm and 30 mm push-button holes.

Corrosion-Resistant Washdown Hole Plugs

Sized for knockouts and conduit openings.

Corrosion-Resistant Washdown
Hole Plugs for Push-Button Holes

Sized for 22 mm and 30 mm push-button holes.

Corrosion-Resistant Washdown
Hole Plugs for Square Holes

Close 2" square holes in the floor of your enclosure with these adhesive plugs.

Self-Centering Hole Plugs

A circular groove quickly centers plug in unused holes and knockouts.

Snap-In Hole Plugs

Seal unused holes and knockouts in enclosures and outlet boxes.

Threaded Hole Plugs

Close off unused threaded holes.

Sanitary Threaded Hole Plugs

FDA compliant for use near food, these plugs close off unused holes in equipment such as electrical enclosures to keep out debris and water.

Submersible Hole Plugs

Threaded Submersible Hole Plugs

Close off unused threaded holes.

Cord Bushings

More rigid than grommets, these bushings guard cords from rubbing against the edges of holes in enclosures and panels and wearing down.

Continuous-Flex Cord Bushings

A spring extension prevents sharp bends and kinks in your cord, prolonging its life. These bushings, which are more rigid than grommets, shield cords from rubbing against the edges of holes in enclosures and panels, so they won’t wear down.

Panel Plugs

Plastic Snap-In Panel Plugs

Tapered prongs or a snap-in ring securely hold these plugs in place.

Metal Snap-In Panel Plugs

Made of steel, these are our most durable plugs for panels. Tapered prongs snap into the hole to securely hold them in place.

Metal Snap-In Panel Plug Assortments

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Vented Snap-In Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

Push-In Panel Plugs

Push these plugs into place for a finished appearance on both sides of a panel.

Locking Panel Plugs

The wings on these plugs expand against the sides of a hole to lock them in place.

Clear Locking Panel Plugs

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

Vented Locking Panel Plugs

Vents in the top allow air circulation and permit heat and fumes to escape. All of these plugs have wings that expand against the sides of the hole to lock them in place.

Sealing Panel Plugs

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Tapered Plugs

Hollow Tapered Plug Assortments

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Hollow Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Expandable Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters.

Tapered Plugs

Often used as laboratory stoppers, these rubber plugs have good impact and abrasion resistance. They’re tapered to fit a range of hole diameters.

Pull-Ring Tapered Plugs

Pull the two built-in rings to quickly remove these plugs. All are tapered to fit a range of hole diameters.

Miniature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Corks

Lightweight and moisture resistant, these plugs are laboratory-grade 100% natural cork. They’re tapered to fit a range of hole diameters.

Tamper-Evident Tapered Plugs

Often used on gas cylinders, these plugs cinch and lock tightly around valve heads to block the ports—they must be cut off making it clear if the cylinder has been tampered with. The plugs are tapered to fit a range of hole diameters.

High-Temperature Tapered Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 570° F. All are tapered to fit a range of hole diameters.

Hollow High-Temperature Tapered Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters. Good for electroplating, paint baking, and powder-coating applications, they withstand temperatures up to 450° F.

Expandable High-Temperature Tapered Plugs

Place a plug into an opening and tighten the wing nut—the sides expand to create a seal in holes of varying diameters. Good for paint baking and powder-coating applications, these plugs withstand temperatures up to 450° F.

Miniature High-Temperature Tapered Plugs

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Chemical-Resistant Tapered Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Their tapered design fits a range of hole diameters.

Food Industry Tapered Plugs

Made of FDA listed materials, these plugs are suitable for food contact. They're tapered to fit a range of hole diameters.

Round Plugs

Snap-In Round Plugs

Flexible ridges or straps hold these plugs in place and allow them to fit a range of hole diameters.

Sealing Plugs

With a compressible flanged top, these plugs are designed to seal the ends of copper tubing often used in water supply lines, refrigerant lines, and HVAC compressors. All are sized to fit standard copper tube dimensions.

Round Plugs

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Antistatic Round Plugs

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

Conductive Round Plugs

With a surface resistivity of less than 10⁵ ohms, these plugs not only dissipate electrical charges, but can be used as an electrical shield.

High-Temperature Round Plugs for NPT Pipe

These plugs withstand temperatures up to 600° F to protect internally threaded NPT connections from contaminants during electropainting, paint baking, and powder coating applications.

Threaded Round Plugs for NPT Pipe

Protect internally threaded NPT connections from contaminants during fabrication and storage.

Threaded Round Plugs for 37° Flared Tube

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

Threaded Round Plugs for Straight-Thread Pipe

Seal tube and hose fittings to keep their straight threads protected from contaminants during fabrication and storage.

Threaded Round Plugs for BSPT Pipe

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Miniature Pull-Through Round Plugs

Also known as mouse tails, these tiny plugs fit through-hole IDs as small as 0.022”, 0.025", or 0.03”.

Chemical-Resistant Pull-Through Round Plugs

These plugs have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

Flanged Pull-Through Round Plugs

Designed with a flange, these plugs protect countersunk holes during anodizing, electroplating, paint baking, and powder-coating applications. All withstand temperatures up to 600° F. Use the smaller end of the plug to pull the larger end into a through hole to form a tight seal.

High-Temperature Pull-Through Round Plugs

Good for electroplating, paint baking, and powder-coating applications, these plugs withstand temperatures up to 600° F. To form a tight seal, use the smaller end of the plug to pull the larger end into a through hole.

Pull-Tab Round Plugs

A time-saving alternative to threaded plugs, these plugs press in place and have an ergonomic pull tab for quick and easy removal. Use them to temporarily protect holes in objects from contaminants during storage, painting, and light fabrication.

Square Plugs

Push-In Square Plugs

Push these plugs into an opening and friction holds them in place.

Snap-In Square Plugs

Flexible ridges or straps hold these plugs in place.

Metal Square Plugs

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Domed Square Plugs

Often used on metal furniture, these plugs provide a finished look on posts and tubes. Snap them into place and their flexible ridges will provide a secure grip.

Rectangular Plugs

Snap-In Rectangular Plugs

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Push-In Rectangular Plugs

Push these plugs into an opening and friction holds them in place.

Hydraulic Sealing Plugs

Permanently seal unthreaded holes in pneumatic and hydraulic components.

Expansion Plugs for Castings

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

Ethernet Port Plugs

Shield unused RJ45 type ports on computers and other electronic equipment from debris and moisture.

Fixture Plate Chip Plugs

Keep chips and shavings from clogging or damaging unused holes on fixture plates in milling machines.

Caps

Tapered Caps

These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

High-Temperature Tapered Caps

Made of silicone, these caps withstand temperatures of 450° F for electroplating, paint-baking, and powder-coating applications. All of these flexible caps are tapered to fit a variety of unthreaded and threaded objects.

Tapered Cap Assortments

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Metal Round Caps

More durable than plastic caps, these provide the most protection from abrasion and impact.

Domed Round Caps

The large domed head extends beyond the diameter of your pipe, rod, or tubing for added protection.

Round Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Heavy Duty Round Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Tethered Round Caps

The tethered design allows frequent access to the ends of pipe, tubing, and other round objects without ever misplacing the cap.

Sure-Grip Round Caps

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

Hanging Round Caps

Slide these caps over a tool handle or other round object and use the eye to hang it.

Roll-Resistant Round Caps

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

High-Temperature Round Caps

Good for electroplating, paint baking, and powder-coating applications, these caps withstand temperatures up to 440° F or 570° F.

Chemical-Resistant Round Caps

These caps have excellent chemical resistance for masking parts during chemical finishing applications such as plating and anodizing.

Conductive Round Caps

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Antistatic Round Caps

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

Food Industry Round Caps

Made of FDA listed materials, these caps are suitable for food contact.

Angle Caps

Place these flexible vinyl caps over the ends of your angle iron and they conform for a snug fit.

Heavy Duty Angle Caps

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Rectangular Caps

Slide these flexible vinyl caps onto rectangular objects and they conform for a snug fit.

Corner Caps

Guard the corners of fragile materials such as glass and mirrors.

Square Caps

Slide these flexible vinyl caps on and they conform for a snug fit.

Heavy Duty Square Caps

Made of rigid plastic, these caps are more wear resistant than vinyl caps but not as flexible.

Heat-Shrink Round Caps

Permanently seal pipe, tubing, conduit, and even crimped electrical connections. Slide these flexible caps on and use a heat gun to tightly shrink them to the shape of whatever they are covering. Their outer surface shrinks while the inner wall flows into voids to create a sealed connection.

Threaded Caps

Protect externally threaded components from contaminants during fabrication and storage.

Flexible Pull-Tab Caps

Slide these flexible vinyl caps on and they conform for a snug fit. Pull the tab for easy removal.

Squeeze Top Caps

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Stretchable Sealing Caps

Tug on the pull tabs to stretch these caps onto the tips of bottles, beakers, flasks, and cylinders, creating an airtight seal.

Propane Tank Tear-Tab Caps

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

High-Visibility Pull-Tab Caps

A vibrant yellow color makes these caps stand out. They are made of flexible rubber that conforms for a snug fit. Pull the tab for easy removal.

Tear-Tab Caps

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

Flange Caps

Adhesive-Back Flange Caps

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Flange Caps

Snap these caps into flange bolt holes to safeguard pipe flanges during shipping, storing, and finishing applications. They all have a thick center pad to protect the flange opening and pipe threads from damage.

SAE Flange Caps

Protect SAE hydraulic flanges during shipping, storing, and finishing applications.

Stretchable Flange Caps

Stretch these caps over flared edges such as flanged tubing and valve handles.

Fastener Caps

Threaded Standoff Caps

Give open-ended standoffs a finished look and protect them from dirt and debris.

Screw Caps

Conceal and protect the tops of socket head or button head screws.

Hex Nut Caps

Sized to fit hex nuts, these caps snap on for a tight hold and provide protection from corrosion.

Snap-On Fastener Caps

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Hinged Fastener Caps

A one-piece hinged design allows frequent access to screw heads without misplacing the top. To conceal and protect the entire screw head, insert your screw through the hole in the base and flip the hinged top over.

USB Caps

Shield USB connectors from damage, contaminants, and moisture when they are not being used.

Rebar Caps

Keep personnel safe from protruding rebar and pipe. Made of rigid plastic, these durable safety caps are bright orange or yellow for excellent visibility.

DIN Rail Caps

Guard the edges of DIN rail from damage and create a finished look.

Capacitor Caps

Also known as capacitor boots, these caps protect capacitors and wire connections from damage to extend their service life. They also insulate wire terminal connections to help reduce accidental shocks.

Sealing Grommets

Wet-Location Snap-In Sealing Grommets

Snap these grommets into place to hold wire, cable, and cords in wet locations and form a seal against dust, debris, and water.

Sealing Grommets

Create a tight seal around wire, cable, and cords with these grommets to keep out dust, debris, and moisture.

Create-Your-Own Split Sealing Grommets

Cut the center of these grommets with a utility knife to create custom IDs. The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Split Sealing Grommets

The two‐piece design makes it easy to install and seal these grommets around wire, cable, and cords that are already in place. Use them to keep out dust, debris, and moisture.

Shrink-to-Fit Sealing Grommets

Apply heat and these grommets shrink around wire, cable, and cords to keep out dust, debris, and moisture.

Liquid-Tight Sealing Grommets

Rated IP68, these grommets form liquid-tight seals around wire, cable, and cords to protect them against dust as well as submersion in a maximum of one meter of water.

Sanitary Sealing Grommets

Create a sanitary seal on through-wall piping, tubing, and cables in food-, cosmetic-, and pharmaceutical-processing areas.

Grommets

Push these flexible grommets into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

High-Temperature Grommets

These flexible grommets withstand temperatures of 450° F or greater, which is approximately twice as high as our standard grommets. Push them into place to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration.

Cut-to-Size Grommets

Cut the thin layer of rubber in the center of these grommets to create custom IDs to securely hold and protect wire, cable, and cords. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes. Commonly used in metal panels, they also damp vibration. Also known as webbed grommets.

Expandable Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Push these grommets into place. They turn rough-edged and uneven holes into smooth, insulated holes.

Grommet Assortments

Keep grommets of various sizes on hand to solve whatever problems arise.

Split Grommets

A slit in the side of these grommets allows you to install them around wire, cable, and cords that are already in place. They snap into the hole and their wings hold them tight. Use them to turn rough-edged and uneven holes into smooth, insulated holes.

Expandable Locking Grommets

The center hole has flaps that flex to hold and protect various sizes of wire, cable, and cords while keeping out dust and debris. Snap these grommets into place and their wings expand against the sides of the hole to lock them in position. Use them to turn rough-edged and uneven holes into smooth holes.

Locking Grommets

These grommets snap into place and have wings that expand against the sides of the hole to lock them in position. Use them to protect wire, cable, and cords by turning rough-edged and uneven holes into smooth holes.

Furniture Grommets

Flexible Furniture Grommets

Squeeze these flexible grommets to open the center flap—once wire, cable, and cords pass through, the flap closes tightly for dust and debris protection as well as a finished look. Use them to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Expandable Furniture Grommets

The center hole has flaps that flex to accommodate various sizes of wire, cable, and cords while still providing dust and debris protection. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Brush-Style Furniture Grommets

Wire, cable, and cords pass through the grommet opening while the bristles fill in the gaps to control dust and debris. Use these grommets to eliminate cord clutter on desktops, countertops, benchtops, and other work surfaces.

Furniture Grommets

Eliminate clutter on desktops, countertops, benchtops, and other work surfaces by organizing wire, cable, and cords.

Pipe and Tubing Grommets

Snap-In Pipe and Tubing Grommets

These grommets have two flanges that snap around holes and flex to compensate for misalignment and movement of pipe and tubing. They're often used for routing applications in panel walls.

Push-In Pipe and Tubing Grommets

Press these flexible grommets into holes and their tapered inner wall will expand when pipe or tubing is inserted to hold them snugly in place. They're often used for routing applications on metal, plastic, and fiberglass tanks.

Shaft Grommets

Support shafts, bearings, and other moving parts that are routed through a hole. These grommets are slippery to allow parts to move freely in the hole. Install them on thin sheet-metal panels.

Fabric Grommets

Self-Piercing Fabric Grommets

The sharp neck on these grommets cuts the material as you press them into place, eliminating the need for a cutting punch. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Rolled-Rim Reinforcing Fabric Grommets

A rolled rim provides added grip while the elongated neck and teeth on the washer, also known as a spur washer, add reinforcement and reduce rotation so you can use these grommets in thick materials such as canvas. Press the grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Fabric Grommets

Press these grommets into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Snap-In Fabric Grommets

No setting tools needed—snap the two parts together in a hole you've already cut to strengthen the hole and eliminate fraying. Use these grommets in tarps, covers, curtains, and other material.

Fabric Grommet Kits

Kits include grommets, a cutting punch, a cutting block, an installation punch, and a die set. Use them to create a way to run rope and cable through tarps, covers, and curtains.

Reinforcing Fabric Grommets

The extended neck on the washer of these grommets adds reinforcement so you can use them in thicker material such as woven fabrics. Press them into a hole you've already cut. They strengthen and prevent holes from fraying in tarps, covers, and curtains. They also provide a way to run rope and cable through your material.

Bumpers

Compressible-Stem Push-In Bumpers

The stem on these bumpers compresses to fit into tight holes. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Push-In Bumpers

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Tight-Grip Push-In Bumpers

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Tack Bumpers

Install with a few taps of a hammer. In addition to protecting soft materials such as wood, fiberboard, and plastic, these bumpers are commonly used on table and chair legs to safeguard floors.

Bumper Assortments

Keep bumpers of various shapes, materials, and mounting styles on hand to solve whatever problems arise.

Expansion Plugs

Wing Nut Expansion Plugs

Twist the wing nut on these plugs to expand the seal.

Hex-Nut Expansion Plugs

Tighten the nut on these plugs to expand the seal.

Square-Head Expansion Plugs

Turn the square head of the plug into the sealing ring to close off pipe openings.

T-Handle Expansion Plugs

Twist the easy-grip t-handle on these plugs to expand the seal.

Quick-Snap Expansion Plugs

Turn the cam handle to expand the seal, then snap the handle down to hold it in place.

Expansion Plugs with Bypass

Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve pressure while testing.

Expansion Plugs for Tubing

These plugs are designed for metal and rigid plastic tubing.

Air- and Water-Inflatable Plugs

Penetrate tight pipe junctures with the most flexible expansion plugs we offer.

Deep-Reach Wing Nut Expansion Plugs

Insert these plugs deep within your pipe to seal it off from the inside.

Deep-Reach Hex Nut Expansion Plugs with Bypass

Use the bypass tube to add air, water, and fluid or relieve back pressure.

Air-Inflatable Plugs with Bypass

Use the bypass tube on these plugs to add air, water, and other fluid to your pipeline or to relieve back pressure while testing.

Air-Inflatable Plugs

Also known as pneumatic plugs, these plugs conform to wide and out-of-round pipes.

Air- and Water-Inflatable Plugs for Y-Joints

These extra-long plugs allow you to seal off two pipes at the same time. They have two separate inflation chambers to release back pressure gradually and prevent splash back as water clears the drain line.

Vibration-Damping Grommets

Press these grommets into a hole to add cushion on both sides.

Extreme-Temperature Vibration-Damping Grommets

In addition to having a wider temperature range than our other vibration-damping grommets, these have excellent weather resistance.

Extreme-Temperature Ribbed
Vibration-Damping Grommets

In addition to having a wider temperature range than our other ribbed vibration-damping grommets, these have excellent weather resistance.

Ribbed Vibration-Damping Grommets

Ribbed grommets are more flexible than our smooth vibration-damping grommets, so they're easier to install.

Brass and Bronze Threaded Pipe and Pipe Fittings

Low-Pressure Plated Brass Threaded Pipe Fittings

Used in low-pressure pipe lines, these brass fittings have a plating that makes them shiny and improves corrosion resistance.

Miniature Low-Pressure Brass Threaded Pipe Fittings

Less than an inch in length, these miniature fittings work well in low-pressure pipe lines that are tight on space.

Low-Pressure Brass and Bronze Threaded Pipe Fittings

Use these fittings in low-pressure flow applications. They have good corrosion resistance.

Low-Pressure Brass Threaded
Pipe Fittings with Sealant

The male threads on these brass fittings have a sealant applied for extra protection against leaks. Also known as Pressure Class 125 fittings, they are built for use in low-pressure applications.

High-Pressure Brass Threaded
Pipe Fittings with Sealant

Not only do these brass fittings have the strength to handle high-pressure applications, the male threads have a sealant applied for extra protection against leaks.

High-Pressure Brass Threaded Pipe Fittings

These brass fittings have the strength to handle high-pressure applications.

High-Pressure Brass Threaded
Pipe Fittings for Drinking Water

Use these heavy-duty brass fittings for high-pressure drinking water applications.

High-Pressure Plated Brass Threaded Pipe Fittings

The plating on these brass fittings creates a shiny finish and provides extra protection in corrosive environments. Fittings have the strength to handle high-pressure applications.

Medium-Pressure Plated Brass Threaded Pipe Fittings

Plated with nickel, these brass fittings resist rust better than steel and unfinished brass fittings. Select them when you need more strength in corrosive environments to handle higher pressures than our low-pressure fittings.

Extreme-Pressure Brass Threaded Pipe Fittings

Extreme pressures are no problem for these heavy-duty brass fittings.

Precision Extreme-Pressure
Brass Threaded Pipe Fittings

Also known as instrumentation fittings, these have the most precise threads and the tightest tolerances of all the brass pipe fittings we offer.

Iron and Steel Threaded Pipe and Pipe Fittings

Low-Pressure Galvanized Steel
Threaded Pipe Fittings with Sealant

The male threads on these fittings have a sealant applied for extra leak protection.

Low-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

The galvanized finish on these fittings provides fair corrosion resistance. Fittings are for use in low-pressure applications.

Low-Pressure Cast Iron Threaded Pipe Fittings

Low-Pressure Iron and Steel Threaded Pipe Fittings

Use these fittings for low-pressure applications in noncorrosive environments.

Extreme-Pressure Steel Threaded Pipe Fittings

The strongest steel fittings we offer, these can withstand extreme-pressure applications.

Compact Extreme-Pressure
Steel Threaded Pipe Fittings

These fittings are strong enough to handle extreme pressures, yet small enough to fit into cramped spaces.

Compact Precision Extreme-Pressure
Steel Threaded Pipe Fittings

Made to tighter tolerances than other steel pipe fittings, these are also known as instrumentation fittings.

High-Pressure Galvanized Steel Threaded Pipe Fittings

A galvanized finish gives these fittings better corrosion resistance than our plain steel high-pressure fittings. Also known as Pressure Class 3000 fittings.

Medium-Pressure Iron and Steel Threaded Pipe Fittings

For use in noncorrosive environments, these fittings have better strength than our low-pressure iron and steel pipe fittings.

High-Pressure Iron and Steel Threaded Pipe Fittings

These fittings can stand up to high-pressure applications. Use them in noncorrosive environments.

Medium-Pressure Galvanized Iron
and Steel Threaded Pipe Fittings

A galvanized finish gives these fittings fair corrosion resistance. They have the strength to handle medium-pressure applications.

Titanium Threaded Pipe Fittings

Titanium has similar strength to steel, but is approximately 40% lighter. It has better corrosion resistance than most stainless steel alloys and can handle corrosive substances, such as salt water and acids.

Aluminum Threaded Pipe and Pipe Fittings

Medium-Pressure Aluminum Threaded Pipe Fittings

Designed for medium-pressure applications, these fittings have better strength than our low-pressure aluminum pipe fittings.

Low-Pressure Aluminum Threaded Pipe Fittings

In addition to being lightweight, these aluminum fittings offer good corrosion resistance. Use them in low-pressure flow applications.

High-Pressure Aluminum Threaded Pipe Fittings

Also known as Pressure Class 3000 fittings, these have the highest pressure rating of all the aluminum pipe fittings we offer.

Stainless Steel Threaded Pipe and Pipe Fittings

Low-Pressure Stainless Steel
Threaded Pipe Fittings with Sealant

The male threads on these fittings have a sealant applied for extra leak protection.

Medium-Pressure Stainless
Steel Threaded Pipe Fittings

Choose these fittings when you want the same high-quality found in our low-pressure pipe fittings, but need more strength to handle higher pressures.

Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

Use these fittings in extreme-pressure conditions up to 15,000 psi.

Miniature Medium-Pressure Stainless
Steel Threaded Pipe Fittings

When space is at a premium choose these compact fittings.

Low-Pressure Stainless Steel Threaded Pipe Fittings

Use these corrosion-resistant fittings in a low-pressure pipe line.

High-Pressure Stainless Steel Threaded Pipe Fittings

Use these heavy duty, corrosion-resistant fittings in high-pressure flow applications.

Precision Extreme-Pressure Stainless
Steel Threaded Pipe Fittings

These fittings are made to tighter tolerances than other stainless steel pipe fittings. They are also known as instrumentation fittings.

Plastic Pipe and Pipe Fittings

Standard-Wall Plastic Pipe Fittings for Water

Connect these fittings to Schedule 40 plastic pipe—they are the industry standard for residential and commercial low-pressure plumbing and water supply applications. They are plastic for good corrosion resistance.

Thick-Wall Plastic Pipe Fittings for Water

Connect these fittings to thick-wall plastic pipe—they have thicker, stronger walls than standard-wall fittings, so they can handle heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. They can withstand pressures up to 900 psi.

High-Pressure Barbed Plastic Pipe Fittings for Water

Use for pressures up to 200 psi. Also known as insert fittings, these slide into semi-flexible plastic pipe and secure with a clamp.

CPVC Pipe Fittings for Hot Water

Connect to CPVC pipe for use in high-temperature plumbing and water supply applications up to 200° F.

Crack-Resistant PFA Pipe Fittings for Chemicals

Not only do these PFA fittings have the chemical resistance to handle acid and salt water, they also have better crack resistance than other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

Plastic Pipe Fittings for Gasoline

Use these plastic fittings to connect gasoline fuel lines to machines and equipment. They have excellent corrosion resistance as well as high strength and impact resistance.

Underground PVC Pipe Fittings
for Drain, Waste, and Vent

With thinner walls than Schedule 40 fittings, these are lighter in weight and have more space on the inside for high-flow applications, such as underground gravity-flow sewer and storm drainage lines. They are also known as SDR 35 fittings.

Drain, Waste, and Vent ABS Pipe Fittings for Chemicals

These fittings are an economical option for chemical waste systems. Fittings are ABS plastic, which has excellent strength and impact resistance and good chemical resistance.

High-Temperature PTFE Pipe Fittings for Chemicals

Extreme temperatures are no problem for these fittings—they’re made of PTFE, so they can withstand a wider temperature range than any of our other plastic pipe fittings for chemicals. They are commonly used in high-purity chemical flow processes, such as semiconductor and clean room applications.

UV-Resistant Polypropylene Pipe Fittings for Chemicals

Made of polypropylene, these fittings won’t deteriorate when exposed to the damaging effects of ultraviolet light and are suitable to use outdoors. They have the chemical resistance to withstand acids, solvents, and other harsh substances.

Plastic Pipe Fitting Plugs for Food and Beverage

Plugs are are suitable for food and beverage applications and won't impart tastes or odors to your product.

Plastic Pipe Fittings for Oil

Made of corrosion-resistant plastic, these fittings won’t deteriorate when used in oil applications. They have high strength and impact resistance.

Aboveground Standard-Wall PVC Pipe
Fittings for Drain, Waste, and Vent

These Schedule 40 fittings are the industry standard for gravity-flow drain, waste, and vent (DWV) applications.

Hose Fittings

Metal Cam-and-Groove Hose
Couplings for Chemicals and Petroleum

Couplings are metal, which has better durability than plastic cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Metal Garden Hose Fittings

Attach these fittings to garden hose for a variety of water supply applications. They are metal for better durability than plastic garden hose fittings.

Metal Cam-and-Groove Hose Couplings for Water

Metal cam-and-groove couplings have better durability than plastic cam-and-groove couplings.

Threaded Hose Fittings for Compressed Gas

Use these CGA fittings to connect welding hose to pressure regulators and torches.

Dust Caps and Plugs for Snap-Tite H-Shape
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Cam-and-Groove Hose Couplings
for Food and Beverage

Couplings are made of FDA listed materials, so they’re suitable for food and beverage applications and won’t impart tastes or odors to the product. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Twist-Claw Hose Couplings for Air and Water

Couplings have an identical claw-style head that connects to another twist-claw hose coupling with a quarter twist.

Threaded Hose Fittings for Hydraulic Fluid

Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system. Use in high-pressure applications up to 6,000 psi

Dust Caps and Plugs for Pioneer Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Dust Caps and Plugs for International Standard ISO B
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Protective Plastic Plugs for
Cam-and-Groove Hose Sockets for Water

Insert these caps into a cam-and-groove socket to protect the end of the coupling from damage. The attached handle allows you to easily maneuver hose.

Dust Caps and Plugs for International Standard
ISO Minimal-Spill Quick-Disconnect
Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Plastic Cam-and-Groove Hose
Couplings for Chemicals and Petroleum

Couplings are plastic, which is lighter in weight than metal cam-and-groove hose couplings. They consist of a plug and a socket that connect and disconnect quickly. Use them if you need frequent access to a line. To connect, insert the plug into the socket and push the levers down.

Plastic Cam-and-Groove Hose Couplings for Water

Made of polypropylene, these cam-and-groove couplings are lighter in weight than metal cam-and-groove hose couplings.

Dust Caps and Plugs for International Standard ISO A
Quick-Disconnect Hose Couplings for Hydraulic Fluid

Use these dust caps and plugs to keep contaminants out of your hose line.

Dust Caps and Plugs for Natural
and LP Gas Hose Fittings

To keep contaminants out of your gas line, add these dust caps and plugs to natural and LP gas couplings when they’re not connected. All work with couplings that are rated ANSI Z21.41/CSA 6.9 for use with gas fuel appliances.

Cleanout and Drain Pipe Plugs

Cleanout Plugs

Close off your drain cleanout pipe with these plugs.

Drain Pipe Plugs

Seal unthreaded pipe ends with these plugs. They come with a band that clamps over the outside wall of your pipe and tightens with a screwdriver.

End Caps for Mounting Rods

Fasteners

Chrome-Plated Plugs for Stainless
Steel Socket Head Screws

Insert these plugs into the drive socket to block debris and provide a finished look.

Push-On Retaining Caps

Use these caps to hold components in place and protect shaft ends.

Thread-In Receptacles for Quick-Release Pins

Use a screwdriver to install these receptacles in a threaded hole.

Surface-Mount Receptacles for Quick-Release Pins

When you can't drill a through hole, use one of these flanged receptacles to provide a permanent, blind hole for a quick-release pin.

Retaining Caps for Quick-Release Pins

Use these retaining caps to secure the ends of quick-release pins in holes that are oversized or out of round.

Hole Plugs for Enclosures

Washdown Hole Plugs

Washdown Hole Plugs for Push-Button Holes

Corrosion-Resistant Washdown Hole Plugs

Corrosion-Resistant WashdownHole Plugs for Push-Button Holes

Corrosion-Resistant WashdownHole Plugs for Square Holes

Self-Centering Hole Plugs

Snap-In Hole Plugs

Threaded Hole Plugs

Sanitary Threaded Hole Plugs

Submersible Hole Plugs

Threaded Submersible Hole Plugs

Cord Bushings

Cord Bushings

Continuous-Flex Cord Bushings

Panel Plugs

Plastic Snap-In Panel Plugs

Metal Snap-In Panel Plugs

Metal Snap-In Panel Plug Assortments

Vented Snap-In Panel Plugs

Push-In Panel Plugs

Locking Panel Plugs

Clear Locking Panel Plugs

Vented Locking Panel Plugs

Sealing Panel Plugs

Tapered Plugs

Hollow Tapered Plug Assortments

Hollow Tapered Plugs

Expandable Tapered Plugs

Tapered Plugs

Pull-Ring Tapered Plugs

Miniature Tapered Plugs

Corks

Tamper-Evident Tapered Plugs

High-Temperature Tapered Plugs

Hollow High-Temperature Tapered Plugs

Expandable High-Temperature Tapered Plugs

Miniature High-Temperature Tapered Plugs

Chemical-Resistant Tapered Plugs

Food Industry Tapered Plugs

Round Plugs

Snap-In Round Plugs

Sealing Plugs

Round Plugs

Antistatic Round Plugs

Conductive Round Plugs

High-Temperature Round Plugs for NPT Pipe

Threaded Round Plugs for NPT Pipe

Threaded Round Plugs for 37° Flared Tube

Threaded Round Plugs for Straight-Thread Pipe

Threaded Round Plugs for BSPT Pipe

Miniature Pull-Through Round Plugs

Chemical-Resistant Pull-Through Round Plugs

Flanged Pull-Through Round Plugs

High-Temperature Pull-Through Round Plugs

Pull-Tab Round Plugs

Square Plugs

Push-In Square Plugs

Snap-In Square Plugs

Metal Square Plugs

Domed Square Plugs

Rectangular Plugs

Snap-In Rectangular Plugs

Push-In Rectangular Plugs

Hydraulic Sealing Plugs

Hydraulic Sealing Plugs

Expansion Plugs for Castings

Expansion Plugs for Castings

Ethernet Port Plugs

Ethernet Port Plugs

Fixture Plate Chip Plugs

Fixture Plate Chip Plugs

Caps

Tapered Caps

High-Temperature Tapered Caps

Tapered Cap Assortments

Metal Round Caps

Domed Round Caps

Round Caps

Heavy Duty Round Caps

Corrosion-Resistant Washdown
Hole Plugs for Push-Button Holes

Corrosion-Resistant Washdown
Hole Plugs for Square Holes