About Finishing
More
Flexible Cylinder Hones for Hard Metals
A long-lasting diamond abrasive is embedded in balls at the ends of flexible spindles that press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Abrasive material is identified by the color on the stem.
Grit is approximate and identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit. Grit availability varies by abrasive.
For technical drawings and 3-D models, click on a part number.
For Cylinder ID | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 180 Grit (Smooth) Red | 400 Grit (Extra Smooth) Yellow | 800 Grit (Polished) Light Blue | |
Diamond (Yellow)—For Use On Hardened Steel, Titanium, Iron, and Nickel | ||||||||
---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||
3/16" | 0.073" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
1/4" | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
1/2" | 0.168" | 8" | 3/4" | 900-1,000 | 0000000 | |||
5/8" | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
3/4" | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
7/8" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
15/16" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
1" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
1 1/8" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
1 1/4" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
1 3/8" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
1 1/2" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
4mm | 0.055" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
4.5mm | 0.055" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
5mm | 0.083" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
5.5mm | 0.083" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
6mm | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
6.4mm | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
7mm | 0.125" | 8" | 2" | 1,000-1,200 | 0000000 | |||
8mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
9mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
9.5mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
10mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
11mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
12mm | 0.168" | 8" | 2 1/2" | 1,000-1,200 | 0000000 | |||
14mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
18mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
20mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 |
Flexible Precision-Finish Cylinder Hones
The flexible shank on these hones gives you access to hard-to-reach spots. A knurled adjustment knob lets you adjust the pressure applied to the side of the cylinder to achieve your desired finish. The square end can hone to the bottom of step-cut and closed-end holes. Use on portable drills. We recommend using them with honing oil to keep the abrasive surface clean.
For technical drawings and 3-D models, click on a part number.
Cylinder Hones | Replacement Stones | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Cylinder ID | Grit (For Finish) | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | No. of Stones | Each | Includes | Choose a Grit (For Finish) | Each | ||
Silicon Carbide—For Use On Steel, Stainless Steel, Titanium, Iron, Aluminum, Brass, Bronze, Copper, and Nickel | ||||||||||||
11/16"-2 1/2" | 220 (Smooth) | 0.25" | 8" | 1 1/8" | 1,500 | 2 | 0000000 | 000000 | Two Stones | 220 (Smooth) | 0000000 | 00000 |
27/32"-2" | 220 (Smooth) | 0.25" | 8" | 1 1/8" | 1,500 | 3 | 0000000 | 00000 | Three Stones | 220 (Smooth) | 0000000 | 0000 |
1 1/2"-3 1/8" | 400 (Extra Smooth) | 0.25" | 8" | 1" | 1,500 | 3 | 0000000 | 00000 | Three Stones | 400 (Extra Smooth) | 0000000 | 0000 |
2"-7" | 220 (Smooth) | 0.25" | 13" | 3" | 1,200 | 3 | 0000000 | 00000 | Three Stones | 0000000 | 00000 |
Precision-Finish Cylinder Hones
Precisely size the hone to your cylinder in micrometer increments. Clip two stones and two felt cleaning wipers onto the four holders and use with portable drills. We recommend using them with honing oil to keep the abrasive surface clean.
For Cylinder ID | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | No. of Stones | Includes | Each | |
1 3/4"-2 3/4" | 0.5" | 14" | 3 1/2" | 750 | 6 | Six Smooth-Finish (180 Grit) Stones Four Holders Six Wipers | 0000000 | 0000000 |
3"-4 1/4" | 0.5" | 17" | 5" | 500 | 4 | Two Rough-Finish (80 Grit) Stones Two Smooth-Finish (180 Grit) Stones Four Holders Four Wipers One 1/2" Dia. Driver Extension | 0000000 | 000000 |
For Cylinder ID | Abrasive Lg. | No. of Pieces | Includes | Each | |
80 Grit (Rough) | |||||
---|---|---|---|---|---|
Silicon Carbide | |||||
1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 000000 |
2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
180 Grit (Smooth) | |||||
Silicon Carbide | |||||
1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
280 Grit (Extra Smooth) | |||||
Silicon Carbide | |||||
1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
500 Grit (Polished) | |||||
Silicon Carbide | |||||
3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
For Cylinder ID | No. of Pieces | Includes | Each | |
2 3/4"-3 3/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 000000 |
3"-4 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
4"-6 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
6 1/8"-10 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
Smoothing and Polishing Stones for Stainless Steel and Hard Metals
The abrasive is specially treated for use on high-grade mold steels such as P-20, H-13, and 420 stainless steel. These stones can be used by hand or in power tools with a compatible holder. We recommend using a water-soluble or oil-based lubricant.
For technical drawings and 3-D models, click on a part number.
Stones | Hand-Held Stone Holders | |||||||
---|---|---|---|---|---|---|---|---|
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Each | Each | ||
Aluminum Oxide—For Use On Steel, Stainless Steel, Titanium, Iron, Nickel | ||||||||
150 (Smooth) | 6" | 1/4" | 1/4" | Blue | 000000000 | 00000 | 00000000 | 00000 |
220 (Smooth) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
320 (Extra Smooth) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
400 (Extra Smooth) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
600 (Polished) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
800 (Polished) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
1000 (Polished) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
1200 (Polished) | 6" | 1/4" | 1/4" | Blue | 000000000 | 0000 | 00000000 | 0000 |
Stones | Hand-Held Stone Holders | Stone Holders for Power Tools | ||||||||
---|---|---|---|---|---|---|---|---|---|---|
Grit (For Finish) | Lg. | Wd. | Thick. | Color | Each | Each | Each | |||
Aluminum Oxide—For Use On Steel, Stainless Steel, Titanium, Iron, Nickel | ||||||||||
150 (Smooth) | 6" | 1/4" | 1/8" | Blue | 000000000 | 00000 | 00000000 | 00000 | 0000000 | 00000 |
150 (Smooth) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
150 (Smooth) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
150 (Smooth) | 6" | 1" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
150 (Smooth) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
220 (Smooth) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
220 (Smooth) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
220 (Smooth) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
220 (Smooth) | 6" | 1" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
220 (Smooth) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
320 (Extra Smooth) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
320 (Extra Smooth) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
320 (Extra Smooth) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
320 (Extra Smooth) | 6" | 1" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
320 (Extra Smooth) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
400 (Extra Smooth) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
400 (Extra Smooth) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
400 (Extra Smooth) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
400 (Extra Smooth) | 6" | 1" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
400 (Extra Smooth) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
600 (Polished) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
600 (Polished) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
600 (Polished) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
600 (Polished) | 6" | 1" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
600 (Polished) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
800 (Polished) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
800 (Polished) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
800 (Polished) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
800 (Polished) | 6" | 1" | 1/4" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
800 (Polished) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
1000 (Polished) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
1000 (Polished) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
1000 (Polished) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
1000 (Polished) | 6" | 1" | 1/4" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
1000 (Polished) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
1200 (Polished) | 6" | 1/4" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 0000000 | 0000 |
1200 (Polished) | 6" | 1/2" | 1/8" | Blue | 000000000 | 0000 | 00000000 | 0000 | 000000 | 00 |
1200 (Polished) | 6" | 1/2" | 1/4" | Blue | 000000000 | 0000 | 000000 | 00 | 000000 | 00 |
1200 (Polished) | 6" | 1" | 1/4" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |
1200 (Polished) | 6" | 1" | 1/2" | Blue | 000000000 | 00000 | 000000 | 00 | 000000 | 00 |